mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 14:53:06 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
498 lines
12 KiB
C
498 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <memalign.h>
|
|
#include <usb.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include "usb_ether.h"
|
|
#include "lan7x.h"
|
|
|
|
/*
|
|
* Lan7x infrastructure commands
|
|
*/
|
|
int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data)
|
|
{
|
|
int len;
|
|
ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1);
|
|
|
|
cpu_to_le32s(&data);
|
|
tmpbuf[0] = data;
|
|
|
|
len = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_VENDOR_REQUEST_WRITE_REGISTER,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0, index, tmpbuf, sizeof(data),
|
|
USB_CTRL_SET_TIMEOUT_MS);
|
|
if (len != sizeof(data)) {
|
|
debug("%s failed: index=%d, data=%d, len=%d",
|
|
__func__, index, data, len);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data)
|
|
{
|
|
int len;
|
|
ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1);
|
|
|
|
len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
USB_VENDOR_REQUEST_READ_REGISTER,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0, index, tmpbuf, sizeof(*data),
|
|
USB_CTRL_GET_TIMEOUT_MS);
|
|
*data = tmpbuf[0];
|
|
if (len != sizeof(*data)) {
|
|
debug("%s failed: index=%d, len=%d", __func__, index, len);
|
|
return -EIO;
|
|
}
|
|
|
|
le32_to_cpus(data);
|
|
return 0;
|
|
}
|
|
|
|
static int lan7x_phy_wait_not_busy(struct usb_device *udev)
|
|
{
|
|
return lan7x_wait_for_bit(udev, __func__,
|
|
MII_ACC, MII_ACC_MII_BUSY,
|
|
false, 100, 0);
|
|
}
|
|
|
|
int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx)
|
|
{
|
|
u32 val, addr;
|
|
|
|
/* confirm MII not busy */
|
|
if (lan7x_phy_wait_not_busy(udev)) {
|
|
debug("MII is busy in %s\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* set the address, index & direction (read from PHY) */
|
|
addr = (phy_id << 11) | (idx << 6) |
|
|
MII_ACC_MII_READ | MII_ACC_MII_BUSY;
|
|
lan7x_write_reg(udev, MII_ACC, addr);
|
|
|
|
if (lan7x_phy_wait_not_busy(udev)) {
|
|
debug("Timed out reading MII reg %02X\n", idx);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
lan7x_read_reg(udev, MII_DATA, &val);
|
|
|
|
return val & 0xFFFF;
|
|
}
|
|
|
|
void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx, int regval)
|
|
{
|
|
u32 addr;
|
|
|
|
/* confirm MII not busy */
|
|
if (lan7x_phy_wait_not_busy(udev)) {
|
|
debug("MII is busy in %s\n", __func__);
|
|
return;
|
|
}
|
|
|
|
lan7x_write_reg(udev, MII_DATA, regval);
|
|
|
|
/* set the address, index & direction (write to PHY) */
|
|
addr = (phy_id << 11) | (idx << 6) |
|
|
MII_ACC_MII_WRITE | MII_ACC_MII_BUSY;
|
|
lan7x_write_reg(udev, MII_ACC, addr);
|
|
|
|
if (lan7x_phy_wait_not_busy(udev))
|
|
debug("Timed out writing MII reg %02X\n", idx);
|
|
}
|
|
|
|
/*
|
|
* Lan7x phylib wrappers
|
|
*/
|
|
static int lan7x_phylib_mdio_read(struct mii_dev *bus,
|
|
int addr, int devad, int reg)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(bus->priv);
|
|
|
|
return lan7x_mdio_read(udev, addr, reg);
|
|
}
|
|
|
|
static int lan7x_phylib_mdio_write(struct mii_dev *bus,
|
|
int addr, int devad, int reg, u16 val)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(bus->priv);
|
|
|
|
lan7x_mdio_write(udev, addr, reg, (int)val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Lan7x eeprom functions
|
|
*/
|
|
static int lan7x_eeprom_confirm_not_busy(struct usb_device *udev)
|
|
{
|
|
return lan7x_wait_for_bit(udev, __func__,
|
|
E2P_CMD, E2P_CMD_EPC_BUSY,
|
|
false, 100, 0);
|
|
}
|
|
|
|
static int lan7x_wait_eeprom(struct usb_device *udev)
|
|
{
|
|
return lan7x_wait_for_bit(udev, __func__,
|
|
E2P_CMD,
|
|
(E2P_CMD_EPC_BUSY | E2P_CMD_EPC_TIMEOUT),
|
|
false, 100, 0);
|
|
}
|
|
|
|
static int lan7x_read_eeprom(struct usb_device *udev,
|
|
u32 offset, u32 length, u8 *data)
|
|
{
|
|
u32 val;
|
|
int i, ret;
|
|
|
|
ret = lan7x_eeprom_confirm_not_busy(udev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < length; i++) {
|
|
val = E2P_CMD_EPC_BUSY | E2P_CMD_EPC_CMD_READ |
|
|
(offset & E2P_CMD_EPC_ADDR_MASK);
|
|
lan7x_write_reg(udev, E2P_CMD, val);
|
|
|
|
ret = lan7x_wait_eeprom(udev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lan7x_read_reg(udev, E2P_DATA, &val);
|
|
data[i] = val & 0xFF;
|
|
offset++;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Lan7x phylib functions
|
|
*/
|
|
int lan7x_phylib_register(struct udevice *udev)
|
|
{
|
|
struct usb_device *usbdev = dev_get_parent_priv(udev);
|
|
struct lan7x_private *priv = dev_get_priv(udev);
|
|
int ret;
|
|
|
|
priv->mdiobus = mdio_alloc();
|
|
if (!priv->mdiobus) {
|
|
printf("mdio_alloc failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
priv->mdiobus->read = lan7x_phylib_mdio_read;
|
|
priv->mdiobus->write = lan7x_phylib_mdio_write;
|
|
sprintf(priv->mdiobus->name,
|
|
"lan7x_mdiobus-d%hu-p%hu", usbdev->devnum, usbdev->portnr);
|
|
priv->mdiobus->priv = (void *)udev;
|
|
|
|
ret = mdio_register(priv->mdiobus);
|
|
if (ret) {
|
|
printf("mdio_register failed\n");
|
|
free(priv->mdiobus);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev)
|
|
{
|
|
struct lan7x_private *priv = dev_get_priv(udev);
|
|
|
|
priv->phydev = phy_connect(priv->mdiobus, dev->phy_id,
|
|
udev, PHY_INTERFACE_MODE_MII);
|
|
|
|
if (!priv->phydev) {
|
|
printf("phy_connect failed\n");
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int lan7x_eth_phylib_config_start(struct udevice *udev)
|
|
{
|
|
struct lan7x_private *priv = dev_get_priv(udev);
|
|
int ret;
|
|
|
|
/* configure supported modes */
|
|
priv->phydev->supported = PHY_BASIC_FEATURES |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause;
|
|
|
|
priv->phydev->advertising = ADVERTISED_10baseT_Half |
|
|
ADVERTISED_10baseT_Full |
|
|
ADVERTISED_100baseT_Half |
|
|
ADVERTISED_100baseT_Full |
|
|
ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_Pause |
|
|
ADVERTISED_Asym_Pause |
|
|
ADVERTISED_Autoneg;
|
|
|
|
priv->phydev->autoneg = AUTONEG_ENABLE;
|
|
|
|
ret = genphy_config_aneg(priv->phydev);
|
|
if (ret) {
|
|
printf("genphy_config_aneg failed\n");
|
|
return ret;
|
|
}
|
|
ret = phy_startup(priv->phydev);
|
|
if (ret) {
|
|
printf("phy_startup failed\n");
|
|
return ret;
|
|
}
|
|
|
|
debug("** %s() speed %i duplex %i adv %X supp %X\n", __func__,
|
|
priv->phydev->speed, priv->phydev->duplex,
|
|
priv->phydev->advertising, priv->phydev->supported);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int lan7x_update_flowcontrol(struct usb_device *udev,
|
|
struct ueth_data *dev,
|
|
uint32_t *flow, uint32_t *fct_flow)
|
|
{
|
|
uint32_t lcladv, rmtadv;
|
|
u8 cap = 0;
|
|
struct lan7x_private *priv = dev_get_priv(udev->dev);
|
|
|
|
debug("** %s()\n", __func__);
|
|
debug("** %s() priv->phydev->speed %i duplex %i\n", __func__,
|
|
priv->phydev->speed, priv->phydev->duplex);
|
|
|
|
if (priv->phydev->duplex == DUPLEX_FULL) {
|
|
lcladv = lan7x_mdio_read(udev, dev->phy_id, MII_ADVERTISE);
|
|
rmtadv = lan7x_mdio_read(udev, dev->phy_id, MII_LPA);
|
|
cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
|
|
|
|
debug("TX Flow ");
|
|
if (cap & FLOW_CTRL_TX) {
|
|
*flow = (FLOW_CR_TX_FCEN | 0xFFFF);
|
|
/* set fct_flow thresholds to 20% and 80% */
|
|
*fct_flow = ((MAX_RX_FIFO_SIZE * 2) / (10 * 512))
|
|
& 0x7FUL;
|
|
*fct_flow <<= 8UL;
|
|
*fct_flow |= ((MAX_RX_FIFO_SIZE * 8) / (10 * 512))
|
|
& 0x7FUL;
|
|
debug("EN ");
|
|
} else {
|
|
debug("DIS ");
|
|
}
|
|
debug("RX Flow ");
|
|
if (cap & FLOW_CTRL_RX) {
|
|
*flow |= FLOW_CR_RX_FCEN;
|
|
debug("EN");
|
|
} else {
|
|
debug("DIS");
|
|
}
|
|
}
|
|
debug("\n");
|
|
return 0;
|
|
}
|
|
|
|
int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev)
|
|
{
|
|
int ret;
|
|
|
|
memset(enetaddr, 0, 6);
|
|
|
|
ret = lan7x_read_eeprom(udev, 0, 1, enetaddr);
|
|
|
|
if ((ret == 0) && (enetaddr[0] == EEPROM_INDICATOR)) {
|
|
ret = lan7x_read_eeprom(udev,
|
|
EEPROM_MAC_OFFSET, ETH_ALEN,
|
|
enetaddr);
|
|
if ((ret == 0) && is_valid_ethaddr(enetaddr)) {
|
|
/* eeprom values are valid so use them */
|
|
debug("MAC address read from EEPROM %pM\n",
|
|
enetaddr);
|
|
return 0;
|
|
}
|
|
}
|
|
debug("MAC address read from EEPROM invalid %pM\n", enetaddr);
|
|
|
|
memset(enetaddr, 0, 6);
|
|
return -EINVAL;
|
|
}
|
|
|
|
int lan7x_pmt_phy_reset(struct usb_device *udev,
|
|
struct ueth_data *dev)
|
|
{
|
|
int ret;
|
|
u32 data;
|
|
|
|
ret = lan7x_read_reg(udev, PMT_CTL, &data);
|
|
if (ret)
|
|
return ret;
|
|
ret = lan7x_write_reg(udev, PMT_CTL, data | PMT_CTL_PHY_RST);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* for LAN7x, we need to check PMT_CTL_READY asserted */
|
|
ret = lan7x_wait_for_bit(udev, "PMT_CTL_PHY_RST",
|
|
PMT_CTL, PMT_CTL_PHY_RST,
|
|
false, 1000, 0); /* could take over 125mS */
|
|
if (ret)
|
|
return ret;
|
|
|
|
return lan7x_wait_for_bit(udev, "PMT_CTL_READY",
|
|
PMT_CTL, PMT_CTL_READY,
|
|
true, 1000, 0);
|
|
}
|
|
|
|
int lan7x_basic_reset(struct usb_device *udev,
|
|
struct ueth_data *dev)
|
|
{
|
|
int ret;
|
|
|
|
dev->phy_id = LAN7X_INTERNAL_PHY_ID; /* fixed phy id */
|
|
|
|
ret = lan7x_write_reg(udev, HW_CFG, HW_CFG_LRST);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_wait_for_bit(udev, "HW_CFG_LRST",
|
|
HW_CFG, HW_CFG_LRST,
|
|
false, 1000, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
debug("USB devnum %d portnr %d\n", udev->devnum, udev->portnr);
|
|
|
|
return lan7x_pmt_phy_reset(udev, dev);
|
|
}
|
|
|
|
void lan7x_eth_stop(struct udevice *dev)
|
|
{
|
|
debug("** %s()\n", __func__);
|
|
}
|
|
|
|
int lan7x_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct lan7x_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
int err;
|
|
int actual_len;
|
|
u32 tx_cmd_a;
|
|
u32 tx_cmd_b;
|
|
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg,
|
|
PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b));
|
|
|
|
debug("** %s(), len %d, buf %#x\n", __func__, length,
|
|
(unsigned int)(ulong) msg);
|
|
if (length > PKTSIZE)
|
|
return -ENOSPC;
|
|
|
|
/* LAN7x disable all TX offload features for u-boot */
|
|
tx_cmd_a = (u32) (length & TX_CMD_A_LEN_MASK) | TX_CMD_A_FCS;
|
|
tx_cmd_b = 0;
|
|
cpu_to_le32s(&tx_cmd_a);
|
|
cpu_to_le32s(&tx_cmd_b);
|
|
|
|
/* prepend cmd_a and cmd_b */
|
|
memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a));
|
|
memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b));
|
|
memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet,
|
|
length);
|
|
err = usb_bulk_msg(ueth->pusb_dev,
|
|
usb_sndbulkpipe(ueth->pusb_dev, ueth->ep_out),
|
|
(void *)msg,
|
|
length + sizeof(tx_cmd_a) +
|
|
sizeof(tx_cmd_b),
|
|
&actual_len, USB_BULK_SEND_TIMEOUT_MS);
|
|
debug("Tx: len = %u, actual = %u, err = %d\n",
|
|
(unsigned int)(length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)),
|
|
(unsigned int)actual_len, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct lan7x_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
uint8_t *ptr;
|
|
int ret, len;
|
|
u32 packet_len = 0;
|
|
u32 rx_cmd_a = 0;
|
|
|
|
len = usb_ether_get_rx_bytes(ueth, &ptr);
|
|
debug("%s: first try, len=%d\n", __func__, len);
|
|
if (!len) {
|
|
if (!(flags & ETH_RECV_CHECK_DEVICE))
|
|
return -EAGAIN;
|
|
ret = usb_ether_receive(ueth, RX_URB_SIZE);
|
|
if (ret == -EAGAIN)
|
|
return ret;
|
|
|
|
len = usb_ether_get_rx_bytes(ueth, &ptr);
|
|
debug("%s: second try, len=%d\n", __func__, len);
|
|
}
|
|
|
|
/*
|
|
* 1st 4 bytes contain the length of the actual data plus error info.
|
|
* Extract data length.
|
|
*/
|
|
if (len < sizeof(packet_len)) {
|
|
debug("Rx: incomplete packet length\n");
|
|
goto err;
|
|
}
|
|
memcpy(&rx_cmd_a, ptr, sizeof(rx_cmd_a));
|
|
le32_to_cpus(&rx_cmd_a);
|
|
if (rx_cmd_a & RX_CMD_A_RXE) {
|
|
debug("Rx: Error header=%#x", rx_cmd_a);
|
|
goto err;
|
|
}
|
|
packet_len = (u16) (rx_cmd_a & RX_CMD_A_LEN_MASK);
|
|
|
|
if (packet_len > len - sizeof(packet_len)) {
|
|
debug("Rx: too large packet: %d\n", packet_len);
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* For LAN7x, the length in command A does not
|
|
* include command A, B, and C length.
|
|
* So use it as is.
|
|
*/
|
|
|
|
*packetp = ptr + 10;
|
|
return packet_len;
|
|
|
|
err:
|
|
usb_ether_advance_rxbuf(ueth, -1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len)
|
|
{
|
|
struct lan7x_private *priv = dev_get_priv(dev);
|
|
|
|
packet_len = ALIGN(packet_len, 4);
|
|
usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int lan7x_eth_remove(struct udevice *dev)
|
|
{
|
|
struct lan7x_private *priv = dev_get_priv(dev);
|
|
|
|
debug("** %s()\n", __func__);
|
|
free(priv->phydev);
|
|
mdio_unregister(priv->mdiobus);
|
|
mdio_free(priv->mdiobus);
|
|
|
|
return 0;
|
|
}
|