mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
711 lines
19 KiB
C
711 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Freescale i.MX6 PCI Express Root-Complex driver
|
|
*
|
|
* Copyright (C) 2013 Marek Vasut <marex@denx.de>
|
|
*
|
|
* Based on upstream Linux kernel driver:
|
|
* pci-imx6.c: Sean Cross <xobs@kosagi.com>
|
|
* pcie-designware.c: Jingoo Han <jg1.han@samsung.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <linux/sizes.h>
|
|
#include <errno.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#define PCI_ACCESS_READ 0
|
|
#define PCI_ACCESS_WRITE 1
|
|
|
|
#ifdef CONFIG_MX6SX
|
|
#define MX6_DBI_ADDR 0x08ffc000
|
|
#define MX6_IO_ADDR 0x08000000
|
|
#define MX6_MEM_ADDR 0x08100000
|
|
#define MX6_ROOT_ADDR 0x08f00000
|
|
#else
|
|
#define MX6_DBI_ADDR 0x01ffc000
|
|
#define MX6_IO_ADDR 0x01000000
|
|
#define MX6_MEM_ADDR 0x01100000
|
|
#define MX6_ROOT_ADDR 0x01f00000
|
|
#endif
|
|
#define MX6_DBI_SIZE 0x4000
|
|
#define MX6_IO_SIZE 0x100000
|
|
#define MX6_MEM_SIZE 0xe00000
|
|
#define MX6_ROOT_SIZE 0xfc000
|
|
|
|
/* PCIe Port Logic registers (memory-mapped) */
|
|
#define PL_OFFSET 0x700
|
|
#define PCIE_PL_PFLR (PL_OFFSET + 0x08)
|
|
#define PCIE_PL_PFLR_LINK_STATE_MASK (0x3f << 16)
|
|
#define PCIE_PL_PFLR_FORCE_LINK (1 << 15)
|
|
#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
|
|
#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
|
|
#define PCIE_PHY_DEBUG_R1_LINK_UP (1 << 4)
|
|
#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING (1 << 29)
|
|
|
|
#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
|
|
#define PCIE_PHY_CTRL_DATA_LOC 0
|
|
#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
|
|
#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
|
|
#define PCIE_PHY_CTRL_WR_LOC 18
|
|
#define PCIE_PHY_CTRL_RD_LOC 19
|
|
|
|
#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
|
|
#define PCIE_PHY_STAT_DATA_LOC 0
|
|
#define PCIE_PHY_STAT_ACK_LOC 16
|
|
|
|
/* PHY registers (not memory-mapped) */
|
|
#define PCIE_PHY_RX_ASIC_OUT 0x100D
|
|
|
|
#define PHY_RX_OVRD_IN_LO 0x1005
|
|
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
|
|
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
|
|
|
|
#define PCIE_PHY_PUP_REQ (1 << 7)
|
|
|
|
/* iATU registers */
|
|
#define PCIE_ATU_VIEWPORT 0x900
|
|
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
|
|
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
|
|
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
#define PCIE_ATU_CR1 0x904
|
|
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
#define PCIE_ATU_TYPE_IO (0x2 << 0)
|
|
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
|
|
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
|
|
#define PCIE_ATU_CR2 0x908
|
|
#define PCIE_ATU_ENABLE (0x1 << 31)
|
|
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
|
|
#define PCIE_ATU_LOWER_BASE 0x90C
|
|
#define PCIE_ATU_UPPER_BASE 0x910
|
|
#define PCIE_ATU_LIMIT 0x914
|
|
#define PCIE_ATU_LOWER_TARGET 0x918
|
|
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
|
|
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
|
|
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
|
|
#define PCIE_ATU_UPPER_TARGET 0x91C
|
|
|
|
/*
|
|
* PHY access functions
|
|
*/
|
|
static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
|
|
{
|
|
u32 val;
|
|
u32 max_iterations = 10;
|
|
u32 wait_counter = 0;
|
|
|
|
do {
|
|
val = readl(dbi_base + PCIE_PHY_STAT);
|
|
val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
|
|
wait_counter++;
|
|
|
|
if (val == exp_val)
|
|
return 0;
|
|
|
|
udelay(1);
|
|
} while (wait_counter < max_iterations);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = addr << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
|
|
writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = addr << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
|
|
static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
|
|
{
|
|
u32 val, phy_ctl;
|
|
int ret;
|
|
|
|
ret = pcie_phy_wait_ack(dbi_base, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert Read signal */
|
|
phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
|
|
writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = readl(dbi_base + PCIE_PHY_STAT);
|
|
*data = val & 0xffff;
|
|
|
|
/* deassert Read signal */
|
|
writel(0x00, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
|
|
{
|
|
u32 var;
|
|
int ret;
|
|
|
|
/* write addr */
|
|
/* cap addr */
|
|
ret = pcie_phy_wait_ack(dbi_base, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* capture data */
|
|
var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert cap data */
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert wr signal */
|
|
var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* wait for ack */
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert wr signal */
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(0x0, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_link_up(void)
|
|
{
|
|
u32 rc, ltssm;
|
|
int rx_valid, temp;
|
|
|
|
/* link is debug bit 36, debug register 1 starts at bit 32 */
|
|
rc = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1);
|
|
if ((rc & PCIE_PHY_DEBUG_R1_LINK_UP) &&
|
|
!(rc & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING))
|
|
return -EAGAIN;
|
|
|
|
/*
|
|
* From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
|
|
* Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
|
|
* If (MAC/LTSSM.state == Recovery.RcvrLock)
|
|
* && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
|
|
* to gen2 is stuck
|
|
*/
|
|
pcie_phy_read((void *)MX6_DBI_ADDR, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
|
|
ltssm = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0) & 0x3F;
|
|
|
|
if (rx_valid & 0x01)
|
|
return 0;
|
|
|
|
if (ltssm != 0x0d)
|
|
return 0;
|
|
|
|
printf("transition to gen2 is stuck, reset PHY!\n");
|
|
|
|
pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp);
|
|
temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp);
|
|
|
|
udelay(3000);
|
|
|
|
pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp);
|
|
temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* iATU region setup
|
|
*/
|
|
static int imx_pcie_regions_setup(void)
|
|
{
|
|
/*
|
|
* i.MX6 defines 16MB in the AXI address map for PCIe.
|
|
*
|
|
* That address space excepted the pcie registers is
|
|
* split and defined into different regions by iATU,
|
|
* with sizes and offsets as follows:
|
|
*
|
|
* 0x0100_0000 --- 0x010F_FFFF 1MB IORESOURCE_IO
|
|
* 0x0110_0000 --- 0x01EF_FFFF 14MB IORESOURCE_MEM
|
|
* 0x01F0_0000 --- 0x01FF_FFFF 1MB Cfg + Registers
|
|
*/
|
|
|
|
/* CMD reg:I/O space, MEM space, and Bus Master Enable */
|
|
setbits_le32(MX6_DBI_ADDR | PCI_COMMAND,
|
|
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
|
|
|
/* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */
|
|
setbits_le32(MX6_DBI_ADDR + PCI_CLASS_REVISION,
|
|
PCI_CLASS_BRIDGE_PCI << 16);
|
|
|
|
/* Region #0 is used for Outbound CFG space access. */
|
|
writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT);
|
|
|
|
writel(MX6_ROOT_ADDR, MX6_DBI_ADDR + PCIE_ATU_LOWER_BASE);
|
|
writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_BASE);
|
|
writel(MX6_ROOT_ADDR + MX6_ROOT_SIZE, MX6_DBI_ADDR + PCIE_ATU_LIMIT);
|
|
|
|
writel(0, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET);
|
|
writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_TARGET);
|
|
writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1);
|
|
writel(PCIE_ATU_ENABLE, MX6_DBI_ADDR + PCIE_ATU_CR2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* PCI Express accessors
|
|
*/
|
|
static uint32_t get_bus_address(pci_dev_t d, int where)
|
|
{
|
|
uint32_t va_address;
|
|
|
|
/* Reconfigure Region #0 */
|
|
writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT);
|
|
|
|
if (PCI_BUS(d) < 2)
|
|
writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1);
|
|
else
|
|
writel(PCIE_ATU_TYPE_CFG1, MX6_DBI_ADDR + PCIE_ATU_CR1);
|
|
|
|
if (PCI_BUS(d) == 0) {
|
|
va_address = MX6_DBI_ADDR;
|
|
} else {
|
|
writel(d << 8, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET);
|
|
va_address = MX6_IO_ADDR + SZ_16M - SZ_1M;
|
|
}
|
|
|
|
va_address += (where & ~0x3);
|
|
|
|
return va_address;
|
|
}
|
|
|
|
static int imx_pcie_addr_valid(pci_dev_t d)
|
|
{
|
|
if ((PCI_BUS(d) == 0) && (PCI_DEV(d) > 1))
|
|
return -EINVAL;
|
|
if ((PCI_BUS(d) == 1) && (PCI_DEV(d) > 0))
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Replace the original ARM DABT handler with a simple jump-back one.
|
|
*
|
|
* The problem here is that if we have a PCIe bridge attached to this PCIe
|
|
* controller, but no PCIe device is connected to the bridges' downstream
|
|
* port, the attempt to read/write from/to the config space will produce
|
|
* a DABT. This is a behavior of the controller and can not be disabled
|
|
* unfortuatelly.
|
|
*
|
|
* To work around the problem, we backup the current DABT handler address
|
|
* and replace it with our own DABT handler, which only bounces right back
|
|
* into the code.
|
|
*/
|
|
static void imx_pcie_fix_dabt_handler(bool set)
|
|
{
|
|
extern uint32_t *_data_abort;
|
|
uint32_t *data_abort_addr = (uint32_t *)&_data_abort;
|
|
|
|
static const uint32_t data_abort_bounce_handler = 0xe25ef004;
|
|
uint32_t data_abort_bounce_addr = (uint32_t)&data_abort_bounce_handler;
|
|
|
|
static uint32_t data_abort_backup;
|
|
|
|
if (set) {
|
|
data_abort_backup = *data_abort_addr;
|
|
*data_abort_addr = data_abort_bounce_addr;
|
|
} else {
|
|
*data_abort_addr = data_abort_backup;
|
|
}
|
|
}
|
|
|
|
static int imx_pcie_read_config(struct pci_controller *hose, pci_dev_t d,
|
|
int where, u32 *val)
|
|
{
|
|
uint32_t va_address;
|
|
int ret;
|
|
|
|
ret = imx_pcie_addr_valid(d);
|
|
if (ret) {
|
|
*val = 0xffffffff;
|
|
return 0;
|
|
}
|
|
|
|
va_address = get_bus_address(d, where);
|
|
|
|
/*
|
|
* Read the PCIe config space. We must replace the DABT handler
|
|
* here in case we got data abort from the PCIe controller, see
|
|
* imx_pcie_fix_dabt_handler() description. Note that writing the
|
|
* "val" with valid value is also imperative here as in case we
|
|
* did got DABT, the val would contain random value.
|
|
*/
|
|
imx_pcie_fix_dabt_handler(true);
|
|
writel(0xffffffff, val);
|
|
*val = readl(va_address);
|
|
imx_pcie_fix_dabt_handler(false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
|
|
int where, u32 val)
|
|
{
|
|
uint32_t va_address = 0;
|
|
int ret;
|
|
|
|
ret = imx_pcie_addr_valid(d);
|
|
if (ret)
|
|
return ret;
|
|
|
|
va_address = get_bus_address(d, where);
|
|
|
|
/*
|
|
* Write the PCIe config space. We must replace the DABT handler
|
|
* here in case we got data abort from the PCIe controller, see
|
|
* imx_pcie_fix_dabt_handler() description.
|
|
*/
|
|
imx_pcie_fix_dabt_handler(true);
|
|
writel(val, va_address);
|
|
imx_pcie_fix_dabt_handler(false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initial bus setup
|
|
*/
|
|
static int imx6_pcie_assert_core_reset(bool prepare_for_boot)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
if (is_mx6dqp())
|
|
setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST);
|
|
|
|
#if defined(CONFIG_MX6SX)
|
|
struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR;
|
|
|
|
/* SSP_EN is not used on MX6SX anymore */
|
|
setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN);
|
|
/* Force PCIe PHY reset */
|
|
setbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST);
|
|
/* Power up PCIe PHY */
|
|
setbits_le32(&gpc_regs->cntr, PCIE_PHY_PUP_REQ);
|
|
#else
|
|
/*
|
|
* If the bootloader already enabled the link we need some special
|
|
* handling to get the core back into a state where it is safe to
|
|
* touch it for configuration. As there is no dedicated reset signal
|
|
* wired up for MX6QDL, we need to manually force LTSSM into "detect"
|
|
* state before completely disabling LTSSM, which is a prerequisite
|
|
* for core configuration.
|
|
*
|
|
* If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong
|
|
* indication that the bootloader activated the link.
|
|
*/
|
|
if (is_mx6dq() && prepare_for_boot) {
|
|
u32 val, gpr1, gpr12;
|
|
|
|
gpr1 = readl(&iomuxc_regs->gpr[1]);
|
|
gpr12 = readl(&iomuxc_regs->gpr[12]);
|
|
if ((gpr1 & IOMUXC_GPR1_PCIE_REF_CLK_EN) &&
|
|
(gpr12 & IOMUXC_GPR12_PCIE_CTL_2)) {
|
|
val = readl(MX6_DBI_ADDR + PCIE_PL_PFLR);
|
|
val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
|
|
val |= PCIE_PL_PFLR_FORCE_LINK;
|
|
|
|
imx_pcie_fix_dabt_handler(true);
|
|
writel(val, MX6_DBI_ADDR + PCIE_PL_PFLR);
|
|
imx_pcie_fix_dabt_handler(false);
|
|
|
|
gpr12 &= ~IOMUXC_GPR12_PCIE_CTL_2;
|
|
writel(val, &iomuxc_regs->gpr[12]);
|
|
}
|
|
}
|
|
setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN);
|
|
clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_init_phy(void)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE);
|
|
|
|
clrsetbits_le32(&iomuxc_regs->gpr[12],
|
|
IOMUXC_GPR12_DEVICE_TYPE_MASK,
|
|
IOMUXC_GPR12_DEVICE_TYPE_RC);
|
|
clrsetbits_le32(&iomuxc_regs->gpr[12],
|
|
IOMUXC_GPR12_LOS_LEVEL_MASK,
|
|
IOMUXC_GPR12_LOS_LEVEL_9);
|
|
|
|
#ifdef CONFIG_MX6SX
|
|
clrsetbits_le32(&iomuxc_regs->gpr[12],
|
|
IOMUXC_GPR12_RX_EQ_MASK,
|
|
IOMUXC_GPR12_RX_EQ_2);
|
|
#endif
|
|
|
|
writel((0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_OFFSET) |
|
|
(0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_OFFSET) |
|
|
(20 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_OFFSET) |
|
|
(127 << IOMUXC_GPR8_PCS_TX_SWING_FULL_OFFSET) |
|
|
(127 << IOMUXC_GPR8_PCS_TX_SWING_LOW_OFFSET),
|
|
&iomuxc_regs->gpr[8]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
__weak int imx6_pcie_toggle_power(void)
|
|
{
|
|
#ifdef CONFIG_PCIE_IMX_POWER_GPIO
|
|
gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "pcie_power");
|
|
gpio_direction_output(CONFIG_PCIE_IMX_POWER_GPIO, 0);
|
|
mdelay(20);
|
|
gpio_set_value(CONFIG_PCIE_IMX_POWER_GPIO, 1);
|
|
mdelay(20);
|
|
gpio_free(CONFIG_PCIE_IMX_POWER_GPIO);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
__weak int imx6_pcie_toggle_reset(void)
|
|
{
|
|
/*
|
|
* See 'PCI EXPRESS BASE SPECIFICATION, REV 3.0, SECTION 6.6.1'
|
|
* for detailed understanding of the PCIe CR reset logic.
|
|
*
|
|
* The PCIe #PERST reset line _MUST_ be connected, otherwise your
|
|
* design does not conform to the specification. You must wait at
|
|
* least 20 ms after de-asserting the #PERST so the EP device can
|
|
* do self-initialisation.
|
|
*
|
|
* In case your #PERST pin is connected to a plain GPIO pin of the
|
|
* CPU, you can define CONFIG_PCIE_IMX_PERST_GPIO in your board's
|
|
* configuration file and the condition below will handle the rest
|
|
* of the reset toggling.
|
|
*
|
|
* In case your #PERST toggling logic is more complex, for example
|
|
* connected via CPLD or somesuch, you can override this function
|
|
* in your board file and implement reset logic as needed. You must
|
|
* not forget to wait at least 20 ms after de-asserting #PERST in
|
|
* this case either though.
|
|
*
|
|
* In case your #PERST line of the PCIe EP device is not connected
|
|
* at all, your design is broken and you should fix your design,
|
|
* otherwise you will observe problems like for example the link
|
|
* not coming up after rebooting the system back from running Linux
|
|
* that uses the PCIe as well OR the PCIe link might not come up in
|
|
* Linux at all in the first place since it's in some non-reset
|
|
* state due to being previously used in U-Boot.
|
|
*/
|
|
#ifdef CONFIG_PCIE_IMX_PERST_GPIO
|
|
gpio_request(CONFIG_PCIE_IMX_PERST_GPIO, "pcie_reset");
|
|
gpio_direction_output(CONFIG_PCIE_IMX_PERST_GPIO, 0);
|
|
mdelay(20);
|
|
gpio_set_value(CONFIG_PCIE_IMX_PERST_GPIO, 1);
|
|
mdelay(20);
|
|
gpio_free(CONFIG_PCIE_IMX_PERST_GPIO);
|
|
#else
|
|
puts("WARNING: Make sure the PCIe #PERST line is connected!\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_deassert_core_reset(void)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
imx6_pcie_toggle_power();
|
|
|
|
enable_pcie_clock();
|
|
|
|
if (is_mx6dqp())
|
|
clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST);
|
|
|
|
/*
|
|
* Wait for the clock to settle a bit, when the clock are sourced
|
|
* from the CPU, we need about 30 ms to settle.
|
|
*/
|
|
mdelay(50);
|
|
|
|
#if defined(CONFIG_MX6SX)
|
|
/* SSP_EN is not used on MX6SX anymore */
|
|
clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN);
|
|
/* Clear PCIe PHY reset bit */
|
|
clrbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST);
|
|
#else
|
|
/* Enable PCIe */
|
|
clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN);
|
|
setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN);
|
|
#endif
|
|
|
|
imx6_pcie_toggle_reset();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx_pcie_link_up(void)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
uint32_t tmp;
|
|
int count = 0;
|
|
|
|
imx6_pcie_assert_core_reset(false);
|
|
imx6_pcie_init_phy();
|
|
imx6_pcie_deassert_core_reset();
|
|
|
|
imx_pcie_regions_setup();
|
|
|
|
/*
|
|
* By default, the subordinate is set equally to the secondary
|
|
* bus (0x01) when the RC boots.
|
|
* This means that theoretically, only bus 1 is reachable from the RC.
|
|
* Force the PCIe RC subordinate to 0xff, otherwise no downstream
|
|
* devices will be detected if the enumeration is applied strictly.
|
|
*/
|
|
tmp = readl(MX6_DBI_ADDR + 0x18);
|
|
tmp |= (0xff << 16);
|
|
writel(tmp, MX6_DBI_ADDR + 0x18);
|
|
|
|
/*
|
|
* FIXME: Force the PCIe RC to Gen1 operation
|
|
* The RC must be forced into Gen1 mode before bringing the link
|
|
* up, otherwise no downstream devices are detected. After the
|
|
* link is up, a managed Gen1->Gen2 transition can be initiated.
|
|
*/
|
|
tmp = readl(MX6_DBI_ADDR + 0x7c);
|
|
tmp &= ~0xf;
|
|
tmp |= 0x1;
|
|
writel(tmp, MX6_DBI_ADDR + 0x7c);
|
|
|
|
/* LTSSM enable, starting link. */
|
|
setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE);
|
|
|
|
while (!imx6_pcie_link_up()) {
|
|
udelay(10);
|
|
count++;
|
|
if (count >= 4000) {
|
|
#ifdef CONFIG_PCI_SCAN_SHOW
|
|
puts("PCI: pcie phy link never came up\n");
|
|
#endif
|
|
debug("DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
|
|
readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0),
|
|
readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1));
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void imx_pcie_init(void)
|
|
{
|
|
/* Static instance of the controller. */
|
|
static struct pci_controller pcc;
|
|
struct pci_controller *hose = &pcc;
|
|
int ret;
|
|
|
|
memset(&pcc, 0, sizeof(pcc));
|
|
|
|
/* PCI I/O space */
|
|
pci_set_region(&hose->regions[0],
|
|
MX6_IO_ADDR, MX6_IO_ADDR,
|
|
MX6_IO_SIZE, PCI_REGION_IO);
|
|
|
|
/* PCI memory space */
|
|
pci_set_region(&hose->regions[1],
|
|
MX6_MEM_ADDR, MX6_MEM_ADDR,
|
|
MX6_MEM_SIZE, PCI_REGION_MEM);
|
|
|
|
/* System memory space */
|
|
pci_set_region(&hose->regions[2],
|
|
MMDC0_ARB_BASE_ADDR, MMDC0_ARB_BASE_ADDR,
|
|
0xefffffff, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
|
|
|
|
hose->region_count = 3;
|
|
|
|
pci_set_ops(hose,
|
|
pci_hose_read_config_byte_via_dword,
|
|
pci_hose_read_config_word_via_dword,
|
|
imx_pcie_read_config,
|
|
pci_hose_write_config_byte_via_dword,
|
|
pci_hose_write_config_word_via_dword,
|
|
imx_pcie_write_config);
|
|
|
|
/* Start the controller. */
|
|
ret = imx_pcie_link_up();
|
|
|
|
if (!ret) {
|
|
pci_register_hose(hose);
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
}
|
|
}
|
|
|
|
void imx_pcie_remove(void)
|
|
{
|
|
imx6_pcie_assert_core_reset(true);
|
|
}
|
|
|
|
/* Probe function. */
|
|
void pci_init_board(void)
|
|
{
|
|
imx_pcie_init();
|
|
}
|