mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
499 lines
17 KiB
C
499 lines
17 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* SMSC LAN9[12]1[567] Network driver
|
|
*
|
|
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
|
|
*/
|
|
|
|
#ifndef _SMC911X_H_
|
|
#define _SMC911X_H_
|
|
|
|
#include <linux/types.h>
|
|
|
|
#define DRIVERNAME "smc911x"
|
|
|
|
#if defined (CONFIG_SMC911X_32_BIT) && \
|
|
defined (CONFIG_SMC911X_16_BIT)
|
|
#error "SMC911X: Only one of CONFIG_SMC911X_32_BIT and \
|
|
CONFIG_SMC911X_16_BIT shall be set"
|
|
#endif
|
|
|
|
#if defined (CONFIG_SMC911X_32_BIT)
|
|
static inline u32 __smc911x_reg_read(struct eth_device *dev, u32 offset)
|
|
{
|
|
return *(volatile u32*)(dev->iobase + offset);
|
|
}
|
|
u32 smc911x_reg_read(struct eth_device *dev, u32 offset)
|
|
__attribute__((weak, alias("__smc911x_reg_read")));
|
|
|
|
static inline void __smc911x_reg_write(struct eth_device *dev,
|
|
u32 offset, u32 val)
|
|
{
|
|
*(volatile u32*)(dev->iobase + offset) = val;
|
|
}
|
|
void smc911x_reg_write(struct eth_device *dev, u32 offset, u32 val)
|
|
__attribute__((weak, alias("__smc911x_reg_write")));
|
|
#elif defined (CONFIG_SMC911X_16_BIT)
|
|
static inline u32 smc911x_reg_read(struct eth_device *dev, u32 offset)
|
|
{
|
|
volatile u16 *addr_16 = (u16 *)(dev->iobase + offset);
|
|
return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
|
|
}
|
|
static inline void smc911x_reg_write(struct eth_device *dev,
|
|
u32 offset, u32 val)
|
|
{
|
|
*(volatile u16 *)(dev->iobase + offset) = (u16)val;
|
|
*(volatile u16 *)(dev->iobase + offset + 2) = (u16)(val >> 16);
|
|
}
|
|
#else
|
|
#error "SMC911X: undefined bus width"
|
|
#endif /* CONFIG_SMC911X_16_BIT */
|
|
|
|
/* Below are the register offsets and bit definitions
|
|
* of the Lan911x memory space
|
|
*/
|
|
#define RX_DATA_FIFO 0x00
|
|
|
|
#define TX_DATA_FIFO 0x20
|
|
#define TX_CMD_A_INT_ON_COMP 0x80000000
|
|
#define TX_CMD_A_INT_BUF_END_ALGN 0x03000000
|
|
#define TX_CMD_A_INT_4_BYTE_ALGN 0x00000000
|
|
#define TX_CMD_A_INT_16_BYTE_ALGN 0x01000000
|
|
#define TX_CMD_A_INT_32_BYTE_ALGN 0x02000000
|
|
#define TX_CMD_A_INT_DATA_OFFSET 0x001F0000
|
|
#define TX_CMD_A_INT_FIRST_SEG 0x00002000
|
|
#define TX_CMD_A_INT_LAST_SEG 0x00001000
|
|
#define TX_CMD_A_BUF_SIZE 0x000007FF
|
|
#define TX_CMD_B_PKT_TAG 0xFFFF0000
|
|
#define TX_CMD_B_ADD_CRC_DISABLE 0x00002000
|
|
#define TX_CMD_B_DISABLE_PADDING 0x00001000
|
|
#define TX_CMD_B_PKT_BYTE_LENGTH 0x000007FF
|
|
|
|
#define RX_STATUS_FIFO 0x40
|
|
#define RX_STS_PKT_LEN 0x3FFF0000
|
|
#define RX_STS_ES 0x00008000
|
|
#define RX_STS_BCST 0x00002000
|
|
#define RX_STS_LEN_ERR 0x00001000
|
|
#define RX_STS_RUNT_ERR 0x00000800
|
|
#define RX_STS_MCAST 0x00000400
|
|
#define RX_STS_TOO_LONG 0x00000080
|
|
#define RX_STS_COLL 0x00000040
|
|
#define RX_STS_ETH_TYPE 0x00000020
|
|
#define RX_STS_WDOG_TMT 0x00000010
|
|
#define RX_STS_MII_ERR 0x00000008
|
|
#define RX_STS_DRIBBLING 0x00000004
|
|
#define RX_STS_CRC_ERR 0x00000002
|
|
#define RX_STATUS_FIFO_PEEK 0x44
|
|
#define TX_STATUS_FIFO 0x48
|
|
#define TX_STS_TAG 0xFFFF0000
|
|
#define TX_STS_ES 0x00008000
|
|
#define TX_STS_LOC 0x00000800
|
|
#define TX_STS_NO_CARR 0x00000400
|
|
#define TX_STS_LATE_COLL 0x00000200
|
|
#define TX_STS_MANY_COLL 0x00000100
|
|
#define TX_STS_COLL_CNT 0x00000078
|
|
#define TX_STS_MANY_DEFER 0x00000004
|
|
#define TX_STS_UNDERRUN 0x00000002
|
|
#define TX_STS_DEFERRED 0x00000001
|
|
#define TX_STATUS_FIFO_PEEK 0x4C
|
|
#define ID_REV 0x50
|
|
#define ID_REV_CHIP_ID 0xFFFF0000 /* RO */
|
|
#define ID_REV_REV_ID 0x0000FFFF /* RO */
|
|
|
|
#define INT_CFG 0x54
|
|
#define INT_CFG_INT_DEAS 0xFF000000 /* R/W */
|
|
#define INT_CFG_INT_DEAS_CLR 0x00004000
|
|
#define INT_CFG_INT_DEAS_STS 0x00002000
|
|
#define INT_CFG_IRQ_INT 0x00001000 /* RO */
|
|
#define INT_CFG_IRQ_EN 0x00000100 /* R/W */
|
|
/* R/W Not Affected by SW Reset */
|
|
#define INT_CFG_IRQ_POL 0x00000010
|
|
/* R/W Not Affected by SW Reset */
|
|
#define INT_CFG_IRQ_TYPE 0x00000001
|
|
|
|
#define INT_STS 0x58
|
|
#define INT_STS_SW_INT 0x80000000 /* R/WC */
|
|
#define INT_STS_TXSTOP_INT 0x02000000 /* R/WC */
|
|
#define INT_STS_RXSTOP_INT 0x01000000 /* R/WC */
|
|
#define INT_STS_RXDFH_INT 0x00800000 /* R/WC */
|
|
#define INT_STS_RXDF_INT 0x00400000 /* R/WC */
|
|
#define INT_STS_TX_IOC 0x00200000 /* R/WC */
|
|
#define INT_STS_RXD_INT 0x00100000 /* R/WC */
|
|
#define INT_STS_GPT_INT 0x00080000 /* R/WC */
|
|
#define INT_STS_PHY_INT 0x00040000 /* RO */
|
|
#define INT_STS_PME_INT 0x00020000 /* R/WC */
|
|
#define INT_STS_TXSO 0x00010000 /* R/WC */
|
|
#define INT_STS_RWT 0x00008000 /* R/WC */
|
|
#define INT_STS_RXE 0x00004000 /* R/WC */
|
|
#define INT_STS_TXE 0x00002000 /* R/WC */
|
|
/*#define INT_STS_ERX 0x00001000*/ /* R/WC */
|
|
#define INT_STS_TDFU 0x00000800 /* R/WC */
|
|
#define INT_STS_TDFO 0x00000400 /* R/WC */
|
|
#define INT_STS_TDFA 0x00000200 /* R/WC */
|
|
#define INT_STS_TSFF 0x00000100 /* R/WC */
|
|
#define INT_STS_TSFL 0x00000080 /* R/WC */
|
|
/*#define INT_STS_RXDF 0x00000040*/ /* R/WC */
|
|
#define INT_STS_RDFO 0x00000040 /* R/WC */
|
|
#define INT_STS_RDFL 0x00000020 /* R/WC */
|
|
#define INT_STS_RSFF 0x00000010 /* R/WC */
|
|
#define INT_STS_RSFL 0x00000008 /* R/WC */
|
|
#define INT_STS_GPIO2_INT 0x00000004 /* R/WC */
|
|
#define INT_STS_GPIO1_INT 0x00000002 /* R/WC */
|
|
#define INT_STS_GPIO0_INT 0x00000001 /* R/WC */
|
|
#define INT_EN 0x5C
|
|
#define INT_EN_SW_INT_EN 0x80000000 /* R/W */
|
|
#define INT_EN_TXSTOP_INT_EN 0x02000000 /* R/W */
|
|
#define INT_EN_RXSTOP_INT_EN 0x01000000 /* R/W */
|
|
#define INT_EN_RXDFH_INT_EN 0x00800000 /* R/W */
|
|
/*#define INT_EN_RXDF_INT_EN 0x00400000*/ /* R/W */
|
|
#define INT_EN_TIOC_INT_EN 0x00200000 /* R/W */
|
|
#define INT_EN_RXD_INT_EN 0x00100000 /* R/W */
|
|
#define INT_EN_GPT_INT_EN 0x00080000 /* R/W */
|
|
#define INT_EN_PHY_INT_EN 0x00040000 /* R/W */
|
|
#define INT_EN_PME_INT_EN 0x00020000 /* R/W */
|
|
#define INT_EN_TXSO_EN 0x00010000 /* R/W */
|
|
#define INT_EN_RWT_EN 0x00008000 /* R/W */
|
|
#define INT_EN_RXE_EN 0x00004000 /* R/W */
|
|
#define INT_EN_TXE_EN 0x00002000 /* R/W */
|
|
/*#define INT_EN_ERX_EN 0x00001000*/ /* R/W */
|
|
#define INT_EN_TDFU_EN 0x00000800 /* R/W */
|
|
#define INT_EN_TDFO_EN 0x00000400 /* R/W */
|
|
#define INT_EN_TDFA_EN 0x00000200 /* R/W */
|
|
#define INT_EN_TSFF_EN 0x00000100 /* R/W */
|
|
#define INT_EN_TSFL_EN 0x00000080 /* R/W */
|
|
/*#define INT_EN_RXDF_EN 0x00000040*/ /* R/W */
|
|
#define INT_EN_RDFO_EN 0x00000040 /* R/W */
|
|
#define INT_EN_RDFL_EN 0x00000020 /* R/W */
|
|
#define INT_EN_RSFF_EN 0x00000010 /* R/W */
|
|
#define INT_EN_RSFL_EN 0x00000008 /* R/W */
|
|
#define INT_EN_GPIO2_INT 0x00000004 /* R/W */
|
|
#define INT_EN_GPIO1_INT 0x00000002 /* R/W */
|
|
#define INT_EN_GPIO0_INT 0x00000001 /* R/W */
|
|
|
|
#define BYTE_TEST 0x64
|
|
#define FIFO_INT 0x68
|
|
#define FIFO_INT_TX_AVAIL_LEVEL 0xFF000000 /* R/W */
|
|
#define FIFO_INT_TX_STS_LEVEL 0x00FF0000 /* R/W */
|
|
#define FIFO_INT_RX_AVAIL_LEVEL 0x0000FF00 /* R/W */
|
|
#define FIFO_INT_RX_STS_LEVEL 0x000000FF /* R/W */
|
|
|
|
#define RX_CFG 0x6C
|
|
#define RX_CFG_RX_END_ALGN 0xC0000000 /* R/W */
|
|
#define RX_CFG_RX_END_ALGN4 0x00000000 /* R/W */
|
|
#define RX_CFG_RX_END_ALGN16 0x40000000 /* R/W */
|
|
#define RX_CFG_RX_END_ALGN32 0x80000000 /* R/W */
|
|
#define RX_CFG_RX_DMA_CNT 0x0FFF0000 /* R/W */
|
|
#define RX_CFG_RX_DUMP 0x00008000 /* R/W */
|
|
#define RX_CFG_RXDOFF 0x00001F00 /* R/W */
|
|
/*#define RX_CFG_RXBAD 0x00000001*/ /* R/W */
|
|
|
|
#define TX_CFG 0x70
|
|
/*#define TX_CFG_TX_DMA_LVL 0xE0000000*/ /* R/W */
|
|
/* R/W Self Clearing */
|
|
/*#define TX_CFG_TX_DMA_CNT 0x0FFF0000*/
|
|
#define TX_CFG_TXS_DUMP 0x00008000 /* Self Clearing */
|
|
#define TX_CFG_TXD_DUMP 0x00004000 /* Self Clearing */
|
|
#define TX_CFG_TXSAO 0x00000004 /* R/W */
|
|
#define TX_CFG_TX_ON 0x00000002 /* R/W */
|
|
#define TX_CFG_STOP_TX 0x00000001 /* Self Clearing */
|
|
|
|
#define HW_CFG 0x74
|
|
#define HW_CFG_TTM 0x00200000 /* R/W */
|
|
#define HW_CFG_SF 0x00100000 /* R/W */
|
|
#define HW_CFG_TX_FIF_SZ 0x000F0000 /* R/W */
|
|
#define HW_CFG_TR 0x00003000 /* R/W */
|
|
#define HW_CFG_PHY_CLK_SEL 0x00000060 /* R/W */
|
|
#define HW_CFG_PHY_CLK_SEL_INT_PHY 0x00000000 /* R/W */
|
|
#define HW_CFG_PHY_CLK_SEL_EXT_PHY 0x00000020 /* R/W */
|
|
#define HW_CFG_PHY_CLK_SEL_CLK_DIS 0x00000040 /* R/W */
|
|
#define HW_CFG_SMI_SEL 0x00000010 /* R/W */
|
|
#define HW_CFG_EXT_PHY_DET 0x00000008 /* RO */
|
|
#define HW_CFG_EXT_PHY_EN 0x00000004 /* R/W */
|
|
#define HW_CFG_32_16_BIT_MODE 0x00000004 /* RO */
|
|
#define HW_CFG_SRST_TO 0x00000002 /* RO */
|
|
#define HW_CFG_SRST 0x00000001 /* Self Clearing */
|
|
|
|
#define RX_DP_CTRL 0x78
|
|
#define RX_DP_CTRL_RX_FFWD 0x80000000 /* R/W */
|
|
#define RX_DP_CTRL_FFWD_BUSY 0x80000000 /* RO */
|
|
|
|
#define RX_FIFO_INF 0x7C
|
|
#define RX_FIFO_INF_RXSUSED 0x00FF0000 /* RO */
|
|
#define RX_FIFO_INF_RXDUSED 0x0000FFFF /* RO */
|
|
|
|
#define TX_FIFO_INF 0x80
|
|
#define TX_FIFO_INF_TSUSED 0x00FF0000 /* RO */
|
|
#define TX_FIFO_INF_TDFREE 0x0000FFFF /* RO */
|
|
|
|
#define PMT_CTRL 0x84
|
|
#define PMT_CTRL_PM_MODE 0x00003000 /* Self Clearing */
|
|
#define PMT_CTRL_PHY_RST 0x00000400 /* Self Clearing */
|
|
#define PMT_CTRL_WOL_EN 0x00000200 /* R/W */
|
|
#define PMT_CTRL_ED_EN 0x00000100 /* R/W */
|
|
/* R/W Not Affected by SW Reset */
|
|
#define PMT_CTRL_PME_TYPE 0x00000040
|
|
#define PMT_CTRL_WUPS 0x00000030 /* R/WC */
|
|
#define PMT_CTRL_WUPS_NOWAKE 0x00000000 /* R/WC */
|
|
#define PMT_CTRL_WUPS_ED 0x00000010 /* R/WC */
|
|
#define PMT_CTRL_WUPS_WOL 0x00000020 /* R/WC */
|
|
#define PMT_CTRL_WUPS_MULTI 0x00000030 /* R/WC */
|
|
#define PMT_CTRL_PME_IND 0x00000008 /* R/W */
|
|
#define PMT_CTRL_PME_POL 0x00000004 /* R/W */
|
|
/* R/W Not Affected by SW Reset */
|
|
#define PMT_CTRL_PME_EN 0x00000002
|
|
#define PMT_CTRL_READY 0x00000001 /* RO */
|
|
|
|
#define GPIO_CFG 0x88
|
|
#define GPIO_CFG_LED3_EN 0x40000000 /* R/W */
|
|
#define GPIO_CFG_LED2_EN 0x20000000 /* R/W */
|
|
#define GPIO_CFG_LED1_EN 0x10000000 /* R/W */
|
|
#define GPIO_CFG_GPIO2_INT_POL 0x04000000 /* R/W */
|
|
#define GPIO_CFG_GPIO1_INT_POL 0x02000000 /* R/W */
|
|
#define GPIO_CFG_GPIO0_INT_POL 0x01000000 /* R/W */
|
|
#define GPIO_CFG_EEPR_EN 0x00700000 /* R/W */
|
|
#define GPIO_CFG_GPIOBUF2 0x00040000 /* R/W */
|
|
#define GPIO_CFG_GPIOBUF1 0x00020000 /* R/W */
|
|
#define GPIO_CFG_GPIOBUF0 0x00010000 /* R/W */
|
|
#define GPIO_CFG_GPIODIR2 0x00000400 /* R/W */
|
|
#define GPIO_CFG_GPIODIR1 0x00000200 /* R/W */
|
|
#define GPIO_CFG_GPIODIR0 0x00000100 /* R/W */
|
|
#define GPIO_CFG_GPIOD4 0x00000010 /* R/W */
|
|
#define GPIO_CFG_GPIOD3 0x00000008 /* R/W */
|
|
#define GPIO_CFG_GPIOD2 0x00000004 /* R/W */
|
|
#define GPIO_CFG_GPIOD1 0x00000002 /* R/W */
|
|
#define GPIO_CFG_GPIOD0 0x00000001 /* R/W */
|
|
|
|
#define GPT_CFG 0x8C
|
|
#define GPT_CFG_TIMER_EN 0x20000000 /* R/W */
|
|
#define GPT_CFG_GPT_LOAD 0x0000FFFF /* R/W */
|
|
|
|
#define GPT_CNT 0x90
|
|
#define GPT_CNT_GPT_CNT 0x0000FFFF /* RO */
|
|
|
|
#define ENDIAN 0x98
|
|
#define FREE_RUN 0x9C
|
|
#define RX_DROP 0xA0
|
|
#define MAC_CSR_CMD 0xA4
|
|
#define MAC_CSR_CMD_CSR_BUSY 0x80000000 /* Self Clearing */
|
|
#define MAC_CSR_CMD_R_NOT_W 0x40000000 /* R/W */
|
|
#define MAC_CSR_CMD_CSR_ADDR 0x000000FF /* R/W */
|
|
|
|
#define MAC_CSR_DATA 0xA8
|
|
#define AFC_CFG 0xAC
|
|
#define AFC_CFG_AFC_HI 0x00FF0000 /* R/W */
|
|
#define AFC_CFG_AFC_LO 0x0000FF00 /* R/W */
|
|
#define AFC_CFG_BACK_DUR 0x000000F0 /* R/W */
|
|
#define AFC_CFG_FCMULT 0x00000008 /* R/W */
|
|
#define AFC_CFG_FCBRD 0x00000004 /* R/W */
|
|
#define AFC_CFG_FCADD 0x00000002 /* R/W */
|
|
#define AFC_CFG_FCANY 0x00000001 /* R/W */
|
|
|
|
#define E2P_CMD 0xB0
|
|
#define E2P_CMD_EPC_BUSY 0x80000000 /* Self Clearing */
|
|
#define E2P_CMD_EPC_CMD 0x70000000 /* R/W */
|
|
#define E2P_CMD_EPC_CMD_READ 0x00000000 /* R/W */
|
|
#define E2P_CMD_EPC_CMD_EWDS 0x10000000 /* R/W */
|
|
#define E2P_CMD_EPC_CMD_EWEN 0x20000000 /* R/W */
|
|
#define E2P_CMD_EPC_CMD_WRITE 0x30000000 /* R/W */
|
|
#define E2P_CMD_EPC_CMD_WRAL 0x40000000 /* R/W */
|
|
#define E2P_CMD_EPC_CMD_ERASE 0x50000000 /* R/W */
|
|
#define E2P_CMD_EPC_CMD_ERAL 0x60000000 /* R/W */
|
|
#define E2P_CMD_EPC_CMD_RELOAD 0x70000000 /* R/W */
|
|
#define E2P_CMD_EPC_TIMEOUT 0x00000200 /* RO */
|
|
#define E2P_CMD_MAC_ADDR_LOADED 0x00000100 /* RO */
|
|
#define E2P_CMD_EPC_ADDR 0x000000FF /* R/W */
|
|
|
|
#define E2P_DATA 0xB4
|
|
#define E2P_DATA_EEPROM_DATA 0x000000FF /* R/W */
|
|
/* end of LAN register offsets and bit definitions */
|
|
|
|
/* MAC Control and Status registers */
|
|
#define MAC_CR 0x01 /* R/W */
|
|
|
|
/* MAC_CR - MAC Control Register */
|
|
#define MAC_CR_RXALL 0x80000000
|
|
/* TODO: delete this bit? It is not described in the data sheet. */
|
|
#define MAC_CR_HBDIS 0x10000000
|
|
#define MAC_CR_RCVOWN 0x00800000
|
|
#define MAC_CR_LOOPBK 0x00200000
|
|
#define MAC_CR_FDPX 0x00100000
|
|
#define MAC_CR_MCPAS 0x00080000
|
|
#define MAC_CR_PRMS 0x00040000
|
|
#define MAC_CR_INVFILT 0x00020000
|
|
#define MAC_CR_PASSBAD 0x00010000
|
|
#define MAC_CR_HFILT 0x00008000
|
|
#define MAC_CR_HPFILT 0x00002000
|
|
#define MAC_CR_LCOLL 0x00001000
|
|
#define MAC_CR_BCAST 0x00000800
|
|
#define MAC_CR_DISRTY 0x00000400
|
|
#define MAC_CR_PADSTR 0x00000100
|
|
#define MAC_CR_BOLMT_MASK 0x000000C0
|
|
#define MAC_CR_DFCHK 0x00000020
|
|
#define MAC_CR_TXEN 0x00000008
|
|
#define MAC_CR_RXEN 0x00000004
|
|
|
|
#define ADDRH 0x02 /* R/W mask 0x0000FFFFUL */
|
|
#define ADDRL 0x03 /* R/W mask 0xFFFFFFFFUL */
|
|
#define HASHH 0x04 /* R/W */
|
|
#define HASHL 0x05 /* R/W */
|
|
|
|
#define MII_ACC 0x06 /* R/W */
|
|
#define MII_ACC_PHY_ADDR 0x0000F800
|
|
#define MII_ACC_MIIRINDA 0x000007C0
|
|
#define MII_ACC_MII_WRITE 0x00000002
|
|
#define MII_ACC_MII_BUSY 0x00000001
|
|
|
|
#define MII_DATA 0x07 /* R/W mask 0x0000FFFFUL */
|
|
|
|
#define FLOW 0x08 /* R/W */
|
|
#define FLOW_FCPT 0xFFFF0000
|
|
#define FLOW_FCPASS 0x00000004
|
|
#define FLOW_FCEN 0x00000002
|
|
#define FLOW_FCBSY 0x00000001
|
|
|
|
#define VLAN1 0x09 /* R/W mask 0x0000FFFFUL */
|
|
#define VLAN1_VTI1 0x0000ffff
|
|
|
|
#define VLAN2 0x0A /* R/W mask 0x0000FFFFUL */
|
|
#define VLAN2_VTI2 0x0000ffff
|
|
|
|
#define WUFF 0x0B /* WO */
|
|
|
|
#define WUCSR 0x0C /* R/W */
|
|
#define WUCSR_GUE 0x00000200
|
|
#define WUCSR_WUFR 0x00000040
|
|
#define WUCSR_MPR 0x00000020
|
|
#define WUCSR_WAKE_EN 0x00000004
|
|
#define WUCSR_MPEN 0x00000002
|
|
|
|
/* Chip ID values */
|
|
#define CHIP_89218 0x218a
|
|
#define CHIP_9115 0x115
|
|
#define CHIP_9116 0x116
|
|
#define CHIP_9117 0x117
|
|
#define CHIP_9118 0x118
|
|
#define CHIP_9211 0x9211
|
|
#define CHIP_9215 0x115a
|
|
#define CHIP_9216 0x116a
|
|
#define CHIP_9217 0x117a
|
|
#define CHIP_9218 0x118a
|
|
#define CHIP_9220 0x9220
|
|
#define CHIP_9221 0x9221
|
|
|
|
struct chip_id {
|
|
u16 id;
|
|
char *name;
|
|
};
|
|
|
|
static const struct chip_id chip_ids[] = {
|
|
{ CHIP_89218, "LAN89218" },
|
|
{ CHIP_9115, "LAN9115" },
|
|
{ CHIP_9116, "LAN9116" },
|
|
{ CHIP_9117, "LAN9117" },
|
|
{ CHIP_9118, "LAN9118" },
|
|
{ CHIP_9211, "LAN9211" },
|
|
{ CHIP_9215, "LAN9215" },
|
|
{ CHIP_9216, "LAN9216" },
|
|
{ CHIP_9217, "LAN9217" },
|
|
{ CHIP_9218, "LAN9218" },
|
|
{ CHIP_9220, "LAN9220" },
|
|
{ CHIP_9221, "LAN9221" },
|
|
{ 0, NULL },
|
|
};
|
|
|
|
static u32 smc911x_get_mac_csr(struct eth_device *dev, u8 reg)
|
|
{
|
|
while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
|
|
;
|
|
smc911x_reg_write(dev, MAC_CSR_CMD,
|
|
MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
|
|
while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
|
|
;
|
|
|
|
return smc911x_reg_read(dev, MAC_CSR_DATA);
|
|
}
|
|
|
|
static void smc911x_set_mac_csr(struct eth_device *dev, u8 reg, u32 data)
|
|
{
|
|
while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
|
|
;
|
|
smc911x_reg_write(dev, MAC_CSR_DATA, data);
|
|
smc911x_reg_write(dev, MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
|
|
while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
|
|
;
|
|
}
|
|
|
|
static int smc911x_detect_chip(struct eth_device *dev)
|
|
{
|
|
unsigned long val, i;
|
|
|
|
val = smc911x_reg_read(dev, BYTE_TEST);
|
|
if (val == 0xffffffff) {
|
|
/* Special case -- no chip present */
|
|
return -1;
|
|
} else if (val != 0x87654321) {
|
|
printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
|
|
return -1;
|
|
}
|
|
|
|
val = smc911x_reg_read(dev, ID_REV) >> 16;
|
|
for (i = 0; chip_ids[i].id != 0; i++) {
|
|
if (chip_ids[i].id == val) break;
|
|
}
|
|
if (!chip_ids[i].id) {
|
|
printf(DRIVERNAME ": Unknown chip ID %04lx\n", val);
|
|
return -1;
|
|
}
|
|
|
|
dev->priv = (void *)&chip_ids[i];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void smc911x_reset(struct eth_device *dev)
|
|
{
|
|
int timeout;
|
|
|
|
/*
|
|
* Take out of PM setting first
|
|
* Device is already wake up if PMT_CTRL_READY bit is set
|
|
*/
|
|
if ((smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY) == 0) {
|
|
/* Write to the bytetest will take out of powerdown */
|
|
smc911x_reg_write(dev, BYTE_TEST, 0x0);
|
|
|
|
timeout = 10;
|
|
|
|
while (timeout-- &&
|
|
!(smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY))
|
|
udelay(10);
|
|
if (timeout < 0) {
|
|
printf(DRIVERNAME
|
|
": timeout waiting for PM restore\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Disable interrupts */
|
|
smc911x_reg_write(dev, INT_EN, 0);
|
|
|
|
smc911x_reg_write(dev, HW_CFG, HW_CFG_SRST);
|
|
|
|
timeout = 1000;
|
|
while (timeout-- && smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
|
|
udelay(10);
|
|
|
|
if (timeout < 0) {
|
|
printf(DRIVERNAME ": reset timeout\n");
|
|
return;
|
|
}
|
|
|
|
/* Reset the FIFO level and flow control settings */
|
|
smc911x_set_mac_csr(dev, FLOW, FLOW_FCPT | FLOW_FCEN);
|
|
smc911x_reg_write(dev, AFC_CFG, 0x0050287F);
|
|
|
|
/* Set to LED outputs */
|
|
smc911x_reg_write(dev, GPIO_CFG, 0x70070000);
|
|
}
|
|
|
|
#endif
|