mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
1182 lines
27 KiB
C
1182 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2005-2006 Atmel Corporation
|
|
*/
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
|
|
/*
|
|
* The u-boot networking stack is a little weird. It seems like the
|
|
* networking core allocates receive buffers up front without any
|
|
* regard to the hardware that's supposed to actually receive those
|
|
* packets.
|
|
*
|
|
* The MACB receives packets into 128-byte receive buffers, so the
|
|
* buffers allocated by the core isn't very practical to use. We'll
|
|
* allocate our own, but we need one such buffer in case a packet
|
|
* wraps around the DMA ring so that we have to copy it.
|
|
*
|
|
* Therefore, define CONFIG_SYS_RX_ETH_BUFFER to 1 in the board-specific
|
|
* configuration header. This way, the core allocates one RX buffer
|
|
* and one TX buffer, each of which can hold a ethernet packet of
|
|
* maximum size.
|
|
*
|
|
* For some reason, the networking core unconditionally specifies a
|
|
* 32-byte packet "alignment" (which really should be called
|
|
* "padding"). MACB shouldn't need that, but we'll refrain from any
|
|
* core modifications here...
|
|
*/
|
|
|
|
#include <net.h>
|
|
#ifndef CONFIG_DM_ETH
|
|
#include <netdev.h>
|
|
#endif
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
|
|
#include <linux/mii.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma-mapping.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <linux/errno.h>
|
|
|
|
#include "macb.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define MACB_RX_BUFFER_SIZE 4096
|
|
#define MACB_RX_RING_SIZE (MACB_RX_BUFFER_SIZE / 128)
|
|
#define MACB_TX_RING_SIZE 16
|
|
#define MACB_TX_TIMEOUT 1000
|
|
#define MACB_AUTONEG_TIMEOUT 5000000
|
|
|
|
#ifdef CONFIG_MACB_ZYNQ
|
|
/* INCR4 AHB bursts */
|
|
#define MACB_ZYNQ_GEM_DMACR_BLENGTH 0x00000004
|
|
/* Use full configured addressable space (8 Kb) */
|
|
#define MACB_ZYNQ_GEM_DMACR_RXSIZE 0x00000300
|
|
/* Use full configured addressable space (4 Kb) */
|
|
#define MACB_ZYNQ_GEM_DMACR_TXSIZE 0x00000400
|
|
/* Set RXBUF with use of 128 byte */
|
|
#define MACB_ZYNQ_GEM_DMACR_RXBUF 0x00020000
|
|
#define MACB_ZYNQ_GEM_DMACR_INIT \
|
|
(MACB_ZYNQ_GEM_DMACR_BLENGTH | \
|
|
MACB_ZYNQ_GEM_DMACR_RXSIZE | \
|
|
MACB_ZYNQ_GEM_DMACR_TXSIZE | \
|
|
MACB_ZYNQ_GEM_DMACR_RXBUF)
|
|
#endif
|
|
|
|
struct macb_dma_desc {
|
|
u32 addr;
|
|
u32 ctrl;
|
|
};
|
|
|
|
#define DMA_DESC_BYTES(n) (n * sizeof(struct macb_dma_desc))
|
|
#define MACB_TX_DMA_DESC_SIZE (DMA_DESC_BYTES(MACB_TX_RING_SIZE))
|
|
#define MACB_RX_DMA_DESC_SIZE (DMA_DESC_BYTES(MACB_RX_RING_SIZE))
|
|
#define MACB_TX_DUMMY_DMA_DESC_SIZE (DMA_DESC_BYTES(1))
|
|
|
|
#define RXADDR_USED 0x00000001
|
|
#define RXADDR_WRAP 0x00000002
|
|
|
|
#define RXBUF_FRMLEN_MASK 0x00000fff
|
|
#define RXBUF_FRAME_START 0x00004000
|
|
#define RXBUF_FRAME_END 0x00008000
|
|
#define RXBUF_TYPEID_MATCH 0x00400000
|
|
#define RXBUF_ADDR4_MATCH 0x00800000
|
|
#define RXBUF_ADDR3_MATCH 0x01000000
|
|
#define RXBUF_ADDR2_MATCH 0x02000000
|
|
#define RXBUF_ADDR1_MATCH 0x04000000
|
|
#define RXBUF_BROADCAST 0x80000000
|
|
|
|
#define TXBUF_FRMLEN_MASK 0x000007ff
|
|
#define TXBUF_FRAME_END 0x00008000
|
|
#define TXBUF_NOCRC 0x00010000
|
|
#define TXBUF_EXHAUSTED 0x08000000
|
|
#define TXBUF_UNDERRUN 0x10000000
|
|
#define TXBUF_MAXRETRY 0x20000000
|
|
#define TXBUF_WRAP 0x40000000
|
|
#define TXBUF_USED 0x80000000
|
|
|
|
struct macb_device {
|
|
void *regs;
|
|
|
|
unsigned int rx_tail;
|
|
unsigned int tx_head;
|
|
unsigned int tx_tail;
|
|
unsigned int next_rx_tail;
|
|
bool wrapped;
|
|
|
|
void *rx_buffer;
|
|
void *tx_buffer;
|
|
struct macb_dma_desc *rx_ring;
|
|
struct macb_dma_desc *tx_ring;
|
|
|
|
unsigned long rx_buffer_dma;
|
|
unsigned long rx_ring_dma;
|
|
unsigned long tx_ring_dma;
|
|
|
|
struct macb_dma_desc *dummy_desc;
|
|
unsigned long dummy_desc_dma;
|
|
|
|
const struct device *dev;
|
|
#ifndef CONFIG_DM_ETH
|
|
struct eth_device netdev;
|
|
#endif
|
|
unsigned short phy_addr;
|
|
struct mii_dev *bus;
|
|
#ifdef CONFIG_PHYLIB
|
|
struct phy_device *phydev;
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
#ifdef CONFIG_CLK
|
|
unsigned long pclk_rate;
|
|
#endif
|
|
phy_interface_t phy_interface;
|
|
#endif
|
|
};
|
|
#ifndef CONFIG_DM_ETH
|
|
#define to_macb(_nd) container_of(_nd, struct macb_device, netdev)
|
|
#endif
|
|
|
|
static int macb_is_gem(struct macb_device *macb)
|
|
{
|
|
return MACB_BFEXT(IDNUM, macb_readl(macb, MID)) == 0x2;
|
|
}
|
|
|
|
#ifndef cpu_is_sama5d2
|
|
#define cpu_is_sama5d2() 0
|
|
#endif
|
|
|
|
#ifndef cpu_is_sama5d4
|
|
#define cpu_is_sama5d4() 0
|
|
#endif
|
|
|
|
static int gem_is_gigabit_capable(struct macb_device *macb)
|
|
{
|
|
/*
|
|
* The GEM controllers embedded in SAMA5D2 and SAMA5D4 are
|
|
* configured to support only 10/100.
|
|
*/
|
|
return macb_is_gem(macb) && !cpu_is_sama5d2() && !cpu_is_sama5d4();
|
|
}
|
|
|
|
static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value)
|
|
{
|
|
unsigned long netctl;
|
|
unsigned long netstat;
|
|
unsigned long frame;
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl |= MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
frame = (MACB_BF(SOF, 1)
|
|
| MACB_BF(RW, 1)
|
|
| MACB_BF(PHYA, macb->phy_addr)
|
|
| MACB_BF(REGA, reg)
|
|
| MACB_BF(CODE, 2)
|
|
| MACB_BF(DATA, value));
|
|
macb_writel(macb, MAN, frame);
|
|
|
|
do {
|
|
netstat = macb_readl(macb, NSR);
|
|
} while (!(netstat & MACB_BIT(IDLE)));
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl &= ~MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
}
|
|
|
|
static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
|
|
{
|
|
unsigned long netctl;
|
|
unsigned long netstat;
|
|
unsigned long frame;
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl |= MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
frame = (MACB_BF(SOF, 1)
|
|
| MACB_BF(RW, 2)
|
|
| MACB_BF(PHYA, macb->phy_addr)
|
|
| MACB_BF(REGA, reg)
|
|
| MACB_BF(CODE, 2));
|
|
macb_writel(macb, MAN, frame);
|
|
|
|
do {
|
|
netstat = macb_readl(macb, NSR);
|
|
} while (!(netstat & MACB_BIT(IDLE)));
|
|
|
|
frame = macb_readl(macb, MAN);
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl &= ~MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
return MACB_BFEXT(DATA, frame);
|
|
}
|
|
|
|
void __weak arch_get_mdio_control(const char *name)
|
|
{
|
|
return;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
|
|
|
|
int macb_miiphy_read(struct mii_dev *bus, int phy_adr, int devad, int reg)
|
|
{
|
|
u16 value = 0;
|
|
#ifdef CONFIG_DM_ETH
|
|
struct udevice *dev = eth_get_dev_by_name(bus->name);
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
#else
|
|
struct eth_device *dev = eth_get_dev_by_name(bus->name);
|
|
struct macb_device *macb = to_macb(dev);
|
|
#endif
|
|
|
|
if (macb->phy_addr != phy_adr)
|
|
return -1;
|
|
|
|
arch_get_mdio_control(bus->name);
|
|
value = macb_mdio_read(macb, reg);
|
|
|
|
return value;
|
|
}
|
|
|
|
int macb_miiphy_write(struct mii_dev *bus, int phy_adr, int devad, int reg,
|
|
u16 value)
|
|
{
|
|
#ifdef CONFIG_DM_ETH
|
|
struct udevice *dev = eth_get_dev_by_name(bus->name);
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
#else
|
|
struct eth_device *dev = eth_get_dev_by_name(bus->name);
|
|
struct macb_device *macb = to_macb(dev);
|
|
#endif
|
|
|
|
if (macb->phy_addr != phy_adr)
|
|
return -1;
|
|
|
|
arch_get_mdio_control(bus->name);
|
|
macb_mdio_write(macb, reg, value);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#define RX 1
|
|
#define TX 0
|
|
static inline void macb_invalidate_ring_desc(struct macb_device *macb, bool rx)
|
|
{
|
|
if (rx)
|
|
invalidate_dcache_range(macb->rx_ring_dma,
|
|
ALIGN(macb->rx_ring_dma + MACB_RX_DMA_DESC_SIZE,
|
|
PKTALIGN));
|
|
else
|
|
invalidate_dcache_range(macb->tx_ring_dma,
|
|
ALIGN(macb->tx_ring_dma + MACB_TX_DMA_DESC_SIZE,
|
|
PKTALIGN));
|
|
}
|
|
|
|
static inline void macb_flush_ring_desc(struct macb_device *macb, bool rx)
|
|
{
|
|
if (rx)
|
|
flush_dcache_range(macb->rx_ring_dma, macb->rx_ring_dma +
|
|
ALIGN(MACB_RX_DMA_DESC_SIZE, PKTALIGN));
|
|
else
|
|
flush_dcache_range(macb->tx_ring_dma, macb->tx_ring_dma +
|
|
ALIGN(MACB_TX_DMA_DESC_SIZE, PKTALIGN));
|
|
}
|
|
|
|
static inline void macb_flush_rx_buffer(struct macb_device *macb)
|
|
{
|
|
flush_dcache_range(macb->rx_buffer_dma, macb->rx_buffer_dma +
|
|
ALIGN(MACB_RX_BUFFER_SIZE, PKTALIGN));
|
|
}
|
|
|
|
static inline void macb_invalidate_rx_buffer(struct macb_device *macb)
|
|
{
|
|
invalidate_dcache_range(macb->rx_buffer_dma, macb->rx_buffer_dma +
|
|
ALIGN(MACB_RX_BUFFER_SIZE, PKTALIGN));
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
|
|
static int _macb_send(struct macb_device *macb, const char *name, void *packet,
|
|
int length)
|
|
{
|
|
unsigned long paddr, ctrl;
|
|
unsigned int tx_head = macb->tx_head;
|
|
int i;
|
|
|
|
paddr = dma_map_single(packet, length, DMA_TO_DEVICE);
|
|
|
|
ctrl = length & TXBUF_FRMLEN_MASK;
|
|
ctrl |= TXBUF_FRAME_END;
|
|
if (tx_head == (MACB_TX_RING_SIZE - 1)) {
|
|
ctrl |= TXBUF_WRAP;
|
|
macb->tx_head = 0;
|
|
} else {
|
|
macb->tx_head++;
|
|
}
|
|
|
|
macb->tx_ring[tx_head].ctrl = ctrl;
|
|
macb->tx_ring[tx_head].addr = paddr;
|
|
barrier();
|
|
macb_flush_ring_desc(macb, TX);
|
|
/* Do we need check paddr and length is dcache line aligned? */
|
|
flush_dcache_range(paddr, paddr + ALIGN(length, ARCH_DMA_MINALIGN));
|
|
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
|
|
|
|
/*
|
|
* I guess this is necessary because the networking core may
|
|
* re-use the transmit buffer as soon as we return...
|
|
*/
|
|
for (i = 0; i <= MACB_TX_TIMEOUT; i++) {
|
|
barrier();
|
|
macb_invalidate_ring_desc(macb, TX);
|
|
ctrl = macb->tx_ring[tx_head].ctrl;
|
|
if (ctrl & TXBUF_USED)
|
|
break;
|
|
udelay(1);
|
|
}
|
|
|
|
dma_unmap_single(packet, length, paddr);
|
|
|
|
if (i <= MACB_TX_TIMEOUT) {
|
|
if (ctrl & TXBUF_UNDERRUN)
|
|
printf("%s: TX underrun\n", name);
|
|
if (ctrl & TXBUF_EXHAUSTED)
|
|
printf("%s: TX buffers exhausted in mid frame\n", name);
|
|
} else {
|
|
printf("%s: TX timeout\n", name);
|
|
}
|
|
|
|
/* No one cares anyway */
|
|
return 0;
|
|
}
|
|
|
|
static void reclaim_rx_buffers(struct macb_device *macb,
|
|
unsigned int new_tail)
|
|
{
|
|
unsigned int i;
|
|
|
|
i = macb->rx_tail;
|
|
|
|
macb_invalidate_ring_desc(macb, RX);
|
|
while (i > new_tail) {
|
|
macb->rx_ring[i].addr &= ~RXADDR_USED;
|
|
i++;
|
|
if (i > MACB_RX_RING_SIZE)
|
|
i = 0;
|
|
}
|
|
|
|
while (i < new_tail) {
|
|
macb->rx_ring[i].addr &= ~RXADDR_USED;
|
|
i++;
|
|
}
|
|
|
|
barrier();
|
|
macb_flush_ring_desc(macb, RX);
|
|
macb->rx_tail = new_tail;
|
|
}
|
|
|
|
static int _macb_recv(struct macb_device *macb, uchar **packetp)
|
|
{
|
|
unsigned int next_rx_tail = macb->next_rx_tail;
|
|
void *buffer;
|
|
int length;
|
|
u32 status;
|
|
|
|
macb->wrapped = false;
|
|
for (;;) {
|
|
macb_invalidate_ring_desc(macb, RX);
|
|
|
|
if (!(macb->rx_ring[next_rx_tail].addr & RXADDR_USED))
|
|
return -EAGAIN;
|
|
|
|
status = macb->rx_ring[next_rx_tail].ctrl;
|
|
if (status & RXBUF_FRAME_START) {
|
|
if (next_rx_tail != macb->rx_tail)
|
|
reclaim_rx_buffers(macb, next_rx_tail);
|
|
macb->wrapped = false;
|
|
}
|
|
|
|
if (status & RXBUF_FRAME_END) {
|
|
buffer = macb->rx_buffer + 128 * macb->rx_tail;
|
|
length = status & RXBUF_FRMLEN_MASK;
|
|
|
|
macb_invalidate_rx_buffer(macb);
|
|
if (macb->wrapped) {
|
|
unsigned int headlen, taillen;
|
|
|
|
headlen = 128 * (MACB_RX_RING_SIZE
|
|
- macb->rx_tail);
|
|
taillen = length - headlen;
|
|
memcpy((void *)net_rx_packets[0],
|
|
buffer, headlen);
|
|
memcpy((void *)net_rx_packets[0] + headlen,
|
|
macb->rx_buffer, taillen);
|
|
*packetp = (void *)net_rx_packets[0];
|
|
} else {
|
|
*packetp = buffer;
|
|
}
|
|
|
|
if (++next_rx_tail >= MACB_RX_RING_SIZE)
|
|
next_rx_tail = 0;
|
|
macb->next_rx_tail = next_rx_tail;
|
|
return length;
|
|
} else {
|
|
if (++next_rx_tail >= MACB_RX_RING_SIZE) {
|
|
macb->wrapped = true;
|
|
next_rx_tail = 0;
|
|
}
|
|
}
|
|
barrier();
|
|
}
|
|
}
|
|
|
|
static void macb_phy_reset(struct macb_device *macb, const char *name)
|
|
{
|
|
int i;
|
|
u16 status, adv;
|
|
|
|
adv = ADVERTISE_CSMA | ADVERTISE_ALL;
|
|
macb_mdio_write(macb, MII_ADVERTISE, adv);
|
|
printf("%s: Starting autonegotiation...\n", name);
|
|
macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
|
|
| BMCR_ANRESTART));
|
|
|
|
for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
|
|
status = macb_mdio_read(macb, MII_BMSR);
|
|
if (status & BMSR_ANEGCOMPLETE)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
|
|
if (status & BMSR_ANEGCOMPLETE)
|
|
printf("%s: Autonegotiation complete\n", name);
|
|
else
|
|
printf("%s: Autonegotiation timed out (status=0x%04x)\n",
|
|
name, status);
|
|
}
|
|
|
|
static int macb_phy_find(struct macb_device *macb, const char *name)
|
|
{
|
|
int i;
|
|
u16 phy_id;
|
|
|
|
/* Search for PHY... */
|
|
for (i = 0; i < 32; i++) {
|
|
macb->phy_addr = i;
|
|
phy_id = macb_mdio_read(macb, MII_PHYSID1);
|
|
if (phy_id != 0xffff) {
|
|
printf("%s: PHY present at %d\n", name, i);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* PHY isn't up to snuff */
|
|
printf("%s: PHY not found\n", name);
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
/**
|
|
* macb_linkspd_cb - Linkspeed change callback function
|
|
* @regs: Base Register of MACB devices
|
|
* @speed: Linkspeed
|
|
* Returns 0 when operation success and negative errno number
|
|
* when operation failed.
|
|
*/
|
|
int __weak macb_linkspd_cb(void *regs, unsigned int speed)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static int macb_phy_init(struct udevice *dev, const char *name)
|
|
#else
|
|
static int macb_phy_init(struct macb_device *macb, const char *name)
|
|
#endif
|
|
{
|
|
#ifdef CONFIG_DM_ETH
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
#endif
|
|
u32 ncfgr;
|
|
u16 phy_id, status, adv, lpa;
|
|
int media, speed, duplex;
|
|
int ret;
|
|
int i;
|
|
|
|
arch_get_mdio_control(name);
|
|
/* Auto-detect phy_addr */
|
|
ret = macb_phy_find(macb, name);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Check if the PHY is up to snuff... */
|
|
phy_id = macb_mdio_read(macb, MII_PHYSID1);
|
|
if (phy_id == 0xffff) {
|
|
printf("%s: No PHY present\n", name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
#ifdef CONFIG_PHYLIB
|
|
#ifdef CONFIG_DM_ETH
|
|
macb->phydev = phy_connect(macb->bus, macb->phy_addr, dev,
|
|
macb->phy_interface);
|
|
#else
|
|
/* need to consider other phy interface mode */
|
|
macb->phydev = phy_connect(macb->bus, macb->phy_addr, &macb->netdev,
|
|
PHY_INTERFACE_MODE_RGMII);
|
|
#endif
|
|
if (!macb->phydev) {
|
|
printf("phy_connect failed\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
phy_config(macb->phydev);
|
|
#endif
|
|
|
|
status = macb_mdio_read(macb, MII_BMSR);
|
|
if (!(status & BMSR_LSTATUS)) {
|
|
/* Try to re-negotiate if we don't have link already. */
|
|
macb_phy_reset(macb, name);
|
|
|
|
for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
|
|
status = macb_mdio_read(macb, MII_BMSR);
|
|
if (status & BMSR_LSTATUS)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
}
|
|
|
|
if (!(status & BMSR_LSTATUS)) {
|
|
printf("%s: link down (status: 0x%04x)\n",
|
|
name, status);
|
|
return -ENETDOWN;
|
|
}
|
|
|
|
/* First check for GMAC and that it is GiB capable */
|
|
if (gem_is_gigabit_capable(macb)) {
|
|
lpa = macb_mdio_read(macb, MII_STAT1000);
|
|
|
|
if (lpa & (LPA_1000FULL | LPA_1000HALF)) {
|
|
duplex = ((lpa & LPA_1000FULL) ? 1 : 0);
|
|
|
|
printf("%s: link up, 1000Mbps %s-duplex (lpa: 0x%04x)\n",
|
|
name,
|
|
duplex ? "full" : "half",
|
|
lpa);
|
|
|
|
ncfgr = macb_readl(macb, NCFGR);
|
|
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
|
|
ncfgr |= GEM_BIT(GBE);
|
|
|
|
if (duplex)
|
|
ncfgr |= MACB_BIT(FD);
|
|
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
|
|
ret = macb_linkspd_cb(macb->regs, _1000BASET);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* fall back for EMAC checking */
|
|
adv = macb_mdio_read(macb, MII_ADVERTISE);
|
|
lpa = macb_mdio_read(macb, MII_LPA);
|
|
media = mii_nway_result(lpa & adv);
|
|
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
|
|
? 1 : 0);
|
|
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
|
|
printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
|
|
name,
|
|
speed ? "100" : "10",
|
|
duplex ? "full" : "half",
|
|
lpa);
|
|
|
|
ncfgr = macb_readl(macb, NCFGR);
|
|
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD) | GEM_BIT(GBE));
|
|
if (speed) {
|
|
ncfgr |= MACB_BIT(SPD);
|
|
ret = macb_linkspd_cb(macb->regs, _100BASET);
|
|
} else {
|
|
ret = macb_linkspd_cb(macb->regs, _10BASET);
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (duplex)
|
|
ncfgr |= MACB_BIT(FD);
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gmac_init_multi_queues(struct macb_device *macb)
|
|
{
|
|
int i, num_queues = 1;
|
|
u32 queue_mask;
|
|
|
|
/* bit 0 is never set but queue 0 always exists */
|
|
queue_mask = gem_readl(macb, DCFG6) & 0xff;
|
|
queue_mask |= 0x1;
|
|
|
|
for (i = 1; i < MACB_MAX_QUEUES; i++)
|
|
if (queue_mask & (1 << i))
|
|
num_queues++;
|
|
|
|
macb->dummy_desc->ctrl = TXBUF_USED;
|
|
macb->dummy_desc->addr = 0;
|
|
flush_dcache_range(macb->dummy_desc_dma, macb->dummy_desc_dma +
|
|
ALIGN(MACB_TX_DUMMY_DMA_DESC_SIZE, PKTALIGN));
|
|
|
|
for (i = 1; i < num_queues; i++)
|
|
gem_writel_queue_TBQP(macb, macb->dummy_desc_dma, i - 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static int _macb_init(struct udevice *dev, const char *name)
|
|
#else
|
|
static int _macb_init(struct macb_device *macb, const char *name)
|
|
#endif
|
|
{
|
|
#ifdef CONFIG_DM_ETH
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
#endif
|
|
unsigned long paddr;
|
|
int ret;
|
|
int i;
|
|
|
|
/*
|
|
* macb_halt should have been called at some point before now,
|
|
* so we'll assume the controller is idle.
|
|
*/
|
|
|
|
/* initialize DMA descriptors */
|
|
paddr = macb->rx_buffer_dma;
|
|
for (i = 0; i < MACB_RX_RING_SIZE; i++) {
|
|
if (i == (MACB_RX_RING_SIZE - 1))
|
|
paddr |= RXADDR_WRAP;
|
|
macb->rx_ring[i].addr = paddr;
|
|
macb->rx_ring[i].ctrl = 0;
|
|
paddr += 128;
|
|
}
|
|
macb_flush_ring_desc(macb, RX);
|
|
macb_flush_rx_buffer(macb);
|
|
|
|
for (i = 0; i < MACB_TX_RING_SIZE; i++) {
|
|
macb->tx_ring[i].addr = 0;
|
|
if (i == (MACB_TX_RING_SIZE - 1))
|
|
macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
|
|
else
|
|
macb->tx_ring[i].ctrl = TXBUF_USED;
|
|
}
|
|
macb_flush_ring_desc(macb, TX);
|
|
|
|
macb->rx_tail = 0;
|
|
macb->tx_head = 0;
|
|
macb->tx_tail = 0;
|
|
macb->next_rx_tail = 0;
|
|
|
|
#ifdef CONFIG_MACB_ZYNQ
|
|
macb_writel(macb, DMACFG, MACB_ZYNQ_GEM_DMACR_INIT);
|
|
#endif
|
|
|
|
macb_writel(macb, RBQP, macb->rx_ring_dma);
|
|
macb_writel(macb, TBQP, macb->tx_ring_dma);
|
|
|
|
if (macb_is_gem(macb)) {
|
|
/* Check the multi queue and initialize the queue for tx */
|
|
gmac_init_multi_queues(macb);
|
|
|
|
/*
|
|
* When the GMAC IP with GE feature, this bit is used to
|
|
* select interface between RGMII and GMII.
|
|
* When the GMAC IP without GE feature, this bit is used
|
|
* to select interface between RMII and MII.
|
|
*/
|
|
#ifdef CONFIG_DM_ETH
|
|
if ((macb->phy_interface == PHY_INTERFACE_MODE_RMII) ||
|
|
(macb->phy_interface == PHY_INTERFACE_MODE_RGMII))
|
|
gem_writel(macb, UR, GEM_BIT(RGMII));
|
|
else
|
|
gem_writel(macb, UR, 0);
|
|
#else
|
|
#if defined(CONFIG_RGMII) || defined(CONFIG_RMII)
|
|
gem_writel(macb, UR, GEM_BIT(RGMII));
|
|
#else
|
|
gem_writel(macb, UR, 0);
|
|
#endif
|
|
#endif
|
|
} else {
|
|
/* choose RMII or MII mode. This depends on the board */
|
|
#ifdef CONFIG_DM_ETH
|
|
#ifdef CONFIG_AT91FAMILY
|
|
if (macb->phy_interface == PHY_INTERFACE_MODE_RMII) {
|
|
macb_writel(macb, USRIO,
|
|
MACB_BIT(RMII) | MACB_BIT(CLKEN));
|
|
} else {
|
|
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
|
|
}
|
|
#else
|
|
if (macb->phy_interface == PHY_INTERFACE_MODE_RMII)
|
|
macb_writel(macb, USRIO, 0);
|
|
else
|
|
macb_writel(macb, USRIO, MACB_BIT(MII));
|
|
#endif
|
|
#else
|
|
#ifdef CONFIG_RMII
|
|
#ifdef CONFIG_AT91FAMILY
|
|
macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
|
|
#else
|
|
macb_writel(macb, USRIO, 0);
|
|
#endif
|
|
#else
|
|
#ifdef CONFIG_AT91FAMILY
|
|
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
|
|
#else
|
|
macb_writel(macb, USRIO, MACB_BIT(MII));
|
|
#endif
|
|
#endif /* CONFIG_RMII */
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
ret = macb_phy_init(dev, name);
|
|
#else
|
|
ret = macb_phy_init(macb, name);
|
|
#endif
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable TX and RX */
|
|
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void _macb_halt(struct macb_device *macb)
|
|
{
|
|
u32 ncr, tsr;
|
|
|
|
/* Halt the controller and wait for any ongoing transmission to end. */
|
|
ncr = macb_readl(macb, NCR);
|
|
ncr |= MACB_BIT(THALT);
|
|
macb_writel(macb, NCR, ncr);
|
|
|
|
do {
|
|
tsr = macb_readl(macb, TSR);
|
|
} while (tsr & MACB_BIT(TGO));
|
|
|
|
/* Disable TX and RX, and clear statistics */
|
|
macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
|
|
}
|
|
|
|
static int _macb_write_hwaddr(struct macb_device *macb, unsigned char *enetaddr)
|
|
{
|
|
u32 hwaddr_bottom;
|
|
u16 hwaddr_top;
|
|
|
|
/* set hardware address */
|
|
hwaddr_bottom = enetaddr[0] | enetaddr[1] << 8 |
|
|
enetaddr[2] << 16 | enetaddr[3] << 24;
|
|
macb_writel(macb, SA1B, hwaddr_bottom);
|
|
hwaddr_top = enetaddr[4] | enetaddr[5] << 8;
|
|
macb_writel(macb, SA1T, hwaddr_top);
|
|
return 0;
|
|
}
|
|
|
|
static u32 macb_mdc_clk_div(int id, struct macb_device *macb)
|
|
{
|
|
u32 config;
|
|
#if defined(CONFIG_DM_ETH) && defined(CONFIG_CLK)
|
|
unsigned long macb_hz = macb->pclk_rate;
|
|
#else
|
|
unsigned long macb_hz = get_macb_pclk_rate(id);
|
|
#endif
|
|
|
|
if (macb_hz < 20000000)
|
|
config = MACB_BF(CLK, MACB_CLK_DIV8);
|
|
else if (macb_hz < 40000000)
|
|
config = MACB_BF(CLK, MACB_CLK_DIV16);
|
|
else if (macb_hz < 80000000)
|
|
config = MACB_BF(CLK, MACB_CLK_DIV32);
|
|
else
|
|
config = MACB_BF(CLK, MACB_CLK_DIV64);
|
|
|
|
return config;
|
|
}
|
|
|
|
static u32 gem_mdc_clk_div(int id, struct macb_device *macb)
|
|
{
|
|
u32 config;
|
|
|
|
#if defined(CONFIG_DM_ETH) && defined(CONFIG_CLK)
|
|
unsigned long macb_hz = macb->pclk_rate;
|
|
#else
|
|
unsigned long macb_hz = get_macb_pclk_rate(id);
|
|
#endif
|
|
|
|
if (macb_hz < 20000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV8);
|
|
else if (macb_hz < 40000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV16);
|
|
else if (macb_hz < 80000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV32);
|
|
else if (macb_hz < 120000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV48);
|
|
else if (macb_hz < 160000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV64);
|
|
else
|
|
config = GEM_BF(CLK, GEM_CLK_DIV96);
|
|
|
|
return config;
|
|
}
|
|
|
|
/*
|
|
* Get the DMA bus width field of the network configuration register that we
|
|
* should program. We find the width from decoding the design configuration
|
|
* register to find the maximum supported data bus width.
|
|
*/
|
|
static u32 macb_dbw(struct macb_device *macb)
|
|
{
|
|
switch (GEM_BFEXT(DBWDEF, gem_readl(macb, DCFG1))) {
|
|
case 4:
|
|
return GEM_BF(DBW, GEM_DBW128);
|
|
case 2:
|
|
return GEM_BF(DBW, GEM_DBW64);
|
|
case 1:
|
|
default:
|
|
return GEM_BF(DBW, GEM_DBW32);
|
|
}
|
|
}
|
|
|
|
static void _macb_eth_initialize(struct macb_device *macb)
|
|
{
|
|
int id = 0; /* This is not used by functions we call */
|
|
u32 ncfgr;
|
|
|
|
/* TODO: we need check the rx/tx_ring_dma is dcache line aligned */
|
|
macb->rx_buffer = dma_alloc_coherent(MACB_RX_BUFFER_SIZE,
|
|
&macb->rx_buffer_dma);
|
|
macb->rx_ring = dma_alloc_coherent(MACB_RX_DMA_DESC_SIZE,
|
|
&macb->rx_ring_dma);
|
|
macb->tx_ring = dma_alloc_coherent(MACB_TX_DMA_DESC_SIZE,
|
|
&macb->tx_ring_dma);
|
|
macb->dummy_desc = dma_alloc_coherent(MACB_TX_DUMMY_DMA_DESC_SIZE,
|
|
&macb->dummy_desc_dma);
|
|
|
|
/*
|
|
* Do some basic initialization so that we at least can talk
|
|
* to the PHY
|
|
*/
|
|
if (macb_is_gem(macb)) {
|
|
ncfgr = gem_mdc_clk_div(id, macb);
|
|
ncfgr |= macb_dbw(macb);
|
|
} else {
|
|
ncfgr = macb_mdc_clk_div(id, macb);
|
|
}
|
|
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
}
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
static int macb_send(struct eth_device *netdev, void *packet, int length)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
|
|
return _macb_send(macb, netdev->name, packet, length);
|
|
}
|
|
|
|
static int macb_recv(struct eth_device *netdev)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
uchar *packet;
|
|
int length;
|
|
|
|
macb->wrapped = false;
|
|
for (;;) {
|
|
macb->next_rx_tail = macb->rx_tail;
|
|
length = _macb_recv(macb, &packet);
|
|
if (length >= 0) {
|
|
net_process_received_packet(packet, length);
|
|
reclaim_rx_buffers(macb, macb->next_rx_tail);
|
|
} else {
|
|
return length;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int macb_init(struct eth_device *netdev, bd_t *bd)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
|
|
return _macb_init(macb, netdev->name);
|
|
}
|
|
|
|
static void macb_halt(struct eth_device *netdev)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
|
|
return _macb_halt(macb);
|
|
}
|
|
|
|
static int macb_write_hwaddr(struct eth_device *netdev)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
|
|
return _macb_write_hwaddr(macb, netdev->enetaddr);
|
|
}
|
|
|
|
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
|
|
{
|
|
struct macb_device *macb;
|
|
struct eth_device *netdev;
|
|
|
|
macb = malloc(sizeof(struct macb_device));
|
|
if (!macb) {
|
|
printf("Error: Failed to allocate memory for MACB%d\n", id);
|
|
return -1;
|
|
}
|
|
memset(macb, 0, sizeof(struct macb_device));
|
|
|
|
netdev = &macb->netdev;
|
|
|
|
macb->regs = regs;
|
|
macb->phy_addr = phy_addr;
|
|
|
|
if (macb_is_gem(macb))
|
|
sprintf(netdev->name, "gmac%d", id);
|
|
else
|
|
sprintf(netdev->name, "macb%d", id);
|
|
|
|
netdev->init = macb_init;
|
|
netdev->halt = macb_halt;
|
|
netdev->send = macb_send;
|
|
netdev->recv = macb_recv;
|
|
netdev->write_hwaddr = macb_write_hwaddr;
|
|
|
|
_macb_eth_initialize(macb);
|
|
|
|
eth_register(netdev);
|
|
|
|
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
|
|
int retval;
|
|
struct mii_dev *mdiodev = mdio_alloc();
|
|
if (!mdiodev)
|
|
return -ENOMEM;
|
|
strncpy(mdiodev->name, netdev->name, MDIO_NAME_LEN);
|
|
mdiodev->read = macb_miiphy_read;
|
|
mdiodev->write = macb_miiphy_write;
|
|
|
|
retval = mdio_register(mdiodev);
|
|
if (retval < 0)
|
|
return retval;
|
|
macb->bus = miiphy_get_dev_by_name(netdev->name);
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif /* !CONFIG_DM_ETH */
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
|
|
static int macb_start(struct udevice *dev)
|
|
{
|
|
return _macb_init(dev, dev->name);
|
|
}
|
|
|
|
static int macb_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
return _macb_send(macb, dev->name, packet, length);
|
|
}
|
|
|
|
static int macb_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
macb->next_rx_tail = macb->rx_tail;
|
|
macb->wrapped = false;
|
|
|
|
return _macb_recv(macb, packetp);
|
|
}
|
|
|
|
static int macb_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
reclaim_rx_buffers(macb, macb->next_rx_tail);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void macb_stop(struct udevice *dev)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
_macb_halt(macb);
|
|
}
|
|
|
|
static int macb_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *plat = dev_get_platdata(dev);
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
return _macb_write_hwaddr(macb, plat->enetaddr);
|
|
}
|
|
|
|
static const struct eth_ops macb_eth_ops = {
|
|
.start = macb_start,
|
|
.send = macb_send,
|
|
.recv = macb_recv,
|
|
.stop = macb_stop,
|
|
.free_pkt = macb_free_pkt,
|
|
.write_hwaddr = macb_write_hwaddr,
|
|
};
|
|
|
|
#ifdef CONFIG_CLK
|
|
static int macb_enable_clk(struct udevice *dev)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
struct clk clk;
|
|
ulong clk_rate;
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Zynq clock driver didn't support for enable or disable
|
|
* clock. Hence, clk_enable() didn't apply for Zynq
|
|
*/
|
|
#ifndef CONFIG_MACB_ZYNQ
|
|
ret = clk_enable(&clk);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
clk_rate = clk_get_rate(&clk);
|
|
if (!clk_rate)
|
|
return -EINVAL;
|
|
|
|
macb->pclk_rate = clk_rate;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int macb_eth_probe(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
const char *phy_mode;
|
|
__maybe_unused int ret;
|
|
|
|
phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
|
|
NULL);
|
|
if (phy_mode)
|
|
macb->phy_interface = phy_get_interface_by_name(phy_mode);
|
|
if (macb->phy_interface == -1) {
|
|
debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
macb->regs = (void *)pdata->iobase;
|
|
|
|
#ifdef CONFIG_CLK
|
|
ret = macb_enable_clk(dev);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
_macb_eth_initialize(macb);
|
|
|
|
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
|
|
macb->bus = mdio_alloc();
|
|
if (!macb->bus)
|
|
return -ENOMEM;
|
|
strncpy(macb->bus->name, dev->name, MDIO_NAME_LEN);
|
|
macb->bus->read = macb_miiphy_read;
|
|
macb->bus->write = macb_miiphy_write;
|
|
|
|
ret = mdio_register(macb->bus);
|
|
if (ret < 0)
|
|
return ret;
|
|
macb->bus = miiphy_get_dev_by_name(dev->name);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int macb_eth_remove(struct udevice *dev)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
#ifdef CONFIG_PHYLIB
|
|
free(macb->phydev);
|
|
#endif
|
|
mdio_unregister(macb->bus);
|
|
mdio_free(macb->bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* macb_late_eth_ofdata_to_platdata
|
|
* @dev: udevice struct
|
|
* Returns 0 when operation success and negative errno number
|
|
* when operation failed.
|
|
*/
|
|
int __weak macb_late_eth_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int macb_eth_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
|
|
pdata->iobase = devfdt_get_addr(dev);
|
|
|
|
return macb_late_eth_ofdata_to_platdata(dev);
|
|
}
|
|
|
|
static const struct udevice_id macb_eth_ids[] = {
|
|
{ .compatible = "cdns,macb" },
|
|
{ .compatible = "cdns,at91sam9260-macb" },
|
|
{ .compatible = "atmel,sama5d2-gem" },
|
|
{ .compatible = "atmel,sama5d3-gem" },
|
|
{ .compatible = "atmel,sama5d4-gem" },
|
|
{ .compatible = "cdns,zynq-gem" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_macb) = {
|
|
.name = "eth_macb",
|
|
.id = UCLASS_ETH,
|
|
.of_match = macb_eth_ids,
|
|
.ofdata_to_platdata = macb_eth_ofdata_to_platdata,
|
|
.probe = macb_eth_probe,
|
|
.remove = macb_eth_remove,
|
|
.ops = &macb_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct macb_device),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
};
|
|
#endif
|
|
|
|
#endif
|