mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
346 lines
8 KiB
C
346 lines
8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2002
|
|
* David Mueller, ELSOFT AG, d.mueller@elsoft.ch
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#else
|
|
#include <asm/arch/s3c24x0_cpu.h>
|
|
#endif
|
|
#include <asm/io.h>
|
|
#include <i2c.h>
|
|
#include "s3c24x0_i2c.h"
|
|
|
|
#ifndef CONFIG_SYS_I2C_S3C24X0_SLAVE
|
|
#define SYS_I2C_S3C24X0_SLAVE_ADDR 0
|
|
#else
|
|
#define SYS_I2C_S3C24X0_SLAVE_ADDR CONFIG_SYS_I2C_S3C24X0_SLAVE
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Wait til the byte transfer is completed.
|
|
*
|
|
* @param i2c- pointer to the appropriate i2c register bank.
|
|
* @return I2C_OK, if transmission was ACKED
|
|
* I2C_NACK, if transmission was NACKED
|
|
* I2C_NOK_TIMEOUT, if transaction did not complete in I2C_TIMEOUT_MS
|
|
*/
|
|
|
|
static int WaitForXfer(struct s3c24x0_i2c *i2c)
|
|
{
|
|
ulong start_time = get_timer(0);
|
|
|
|
do {
|
|
if (readl(&i2c->iiccon) & I2CCON_IRPND)
|
|
return (readl(&i2c->iicstat) & I2CSTAT_NACK) ?
|
|
I2C_NACK : I2C_OK;
|
|
} while (get_timer(start_time) < I2C_TIMEOUT_MS);
|
|
|
|
return I2C_NOK_TOUT;
|
|
}
|
|
|
|
static void read_write_byte(struct s3c24x0_i2c *i2c)
|
|
{
|
|
clrbits_le32(&i2c->iiccon, I2CCON_IRPND);
|
|
}
|
|
|
|
static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd)
|
|
{
|
|
ulong freq, pres = 16, div;
|
|
#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
|
|
freq = get_i2c_clk();
|
|
#else
|
|
freq = get_PCLK();
|
|
#endif
|
|
/* calculate prescaler and divisor values */
|
|
if ((freq / pres / (16 + 1)) > speed)
|
|
/* set prescaler to 512 */
|
|
pres = 512;
|
|
|
|
div = 0;
|
|
while ((freq / pres / (div + 1)) > speed)
|
|
div++;
|
|
|
|
/* set prescaler, divisor according to freq, also set ACKGEN, IRQ */
|
|
writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->iiccon);
|
|
|
|
/* init to SLAVE REVEIVE and set slaveaddr */
|
|
writel(0, &i2c->iicstat);
|
|
writel(slaveadd, &i2c->iicadd);
|
|
/* program Master Transmit (and implicit STOP) */
|
|
writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
|
|
}
|
|
|
|
static int s3c24x0_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
|
|
{
|
|
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
|
|
|
|
i2c_bus->clock_frequency = speed;
|
|
|
|
i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency,
|
|
SYS_I2C_S3C24X0_SLAVE_ADDR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* cmd_type is 0 for write, 1 for read.
|
|
*
|
|
* addr_len can take any value from 0-255, it is only limited
|
|
* by the char, we could make it larger if needed. If it is
|
|
* 0 we skip the address write cycle.
|
|
*/
|
|
static int i2c_transfer(struct s3c24x0_i2c *i2c,
|
|
unsigned char cmd_type,
|
|
unsigned char chip,
|
|
unsigned char addr[],
|
|
unsigned char addr_len,
|
|
unsigned char data[],
|
|
unsigned short data_len)
|
|
{
|
|
int i = 0, result;
|
|
ulong start_time = get_timer(0);
|
|
|
|
if (data == 0 || data_len == 0) {
|
|
/*Don't support data transfer of no length or to address 0 */
|
|
debug("i2c_transfer: bad call\n");
|
|
return I2C_NOK;
|
|
}
|
|
|
|
while (readl(&i2c->iicstat) & I2CSTAT_BSY) {
|
|
if (get_timer(start_time) > I2C_TIMEOUT_MS)
|
|
return I2C_NOK_TOUT;
|
|
}
|
|
|
|
writel(readl(&i2c->iiccon) | I2CCON_ACKGEN, &i2c->iiccon);
|
|
|
|
/* Get the slave chip address going */
|
|
writel(chip, &i2c->iicds);
|
|
if ((cmd_type == I2C_WRITE) || (addr && addr_len))
|
|
writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
|
|
&i2c->iicstat);
|
|
else
|
|
writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP,
|
|
&i2c->iicstat);
|
|
|
|
/* Wait for chip address to transmit. */
|
|
result = WaitForXfer(i2c);
|
|
if (result != I2C_OK)
|
|
goto bailout;
|
|
|
|
/* If register address needs to be transmitted - do it now. */
|
|
if (addr && addr_len) {
|
|
while ((i < addr_len) && (result == I2C_OK)) {
|
|
writel(addr[i++], &i2c->iicds);
|
|
read_write_byte(i2c);
|
|
result = WaitForXfer(i2c);
|
|
}
|
|
i = 0;
|
|
if (result != I2C_OK)
|
|
goto bailout;
|
|
}
|
|
|
|
switch (cmd_type) {
|
|
case I2C_WRITE:
|
|
while ((i < data_len) && (result == I2C_OK)) {
|
|
writel(data[i++], &i2c->iicds);
|
|
read_write_byte(i2c);
|
|
result = WaitForXfer(i2c);
|
|
}
|
|
break;
|
|
|
|
case I2C_READ:
|
|
if (addr && addr_len) {
|
|
/*
|
|
* Register address has been sent, now send slave chip
|
|
* address again to start the actual read transaction.
|
|
*/
|
|
writel(chip, &i2c->iicds);
|
|
|
|
/* Generate a re-START. */
|
|
writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP,
|
|
&i2c->iicstat);
|
|
read_write_byte(i2c);
|
|
result = WaitForXfer(i2c);
|
|
|
|
if (result != I2C_OK)
|
|
goto bailout;
|
|
}
|
|
|
|
while ((i < data_len) && (result == I2C_OK)) {
|
|
/* disable ACK for final READ */
|
|
if (i == data_len - 1)
|
|
writel(readl(&i2c->iiccon)
|
|
& ~I2CCON_ACKGEN,
|
|
&i2c->iiccon);
|
|
read_write_byte(i2c);
|
|
result = WaitForXfer(i2c);
|
|
data[i++] = readl(&i2c->iicds);
|
|
}
|
|
if (result == I2C_NACK)
|
|
result = I2C_OK; /* Normal terminated read. */
|
|
break;
|
|
|
|
default:
|
|
debug("i2c_transfer: bad call\n");
|
|
result = I2C_NOK;
|
|
break;
|
|
}
|
|
|
|
bailout:
|
|
/* Send STOP. */
|
|
writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat);
|
|
read_write_byte(i2c);
|
|
|
|
return result;
|
|
}
|
|
|
|
static int s3c24x0_i2c_probe(struct udevice *dev, uint chip, uint chip_flags)
|
|
{
|
|
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
|
|
uchar buf[1];
|
|
int ret;
|
|
|
|
buf[0] = 0;
|
|
|
|
/*
|
|
* What is needed is to send the chip address and verify that the
|
|
* address was <ACK>ed (i.e. there was a chip at that address which
|
|
* drove the data line low).
|
|
*/
|
|
ret = i2c_transfer(i2c_bus->regs, I2C_READ, chip << 1, 0, 0, buf, 1);
|
|
|
|
return ret != I2C_OK;
|
|
}
|
|
|
|
static int s3c24x0_do_msg(struct s3c24x0_i2c_bus *i2c_bus, struct i2c_msg *msg,
|
|
int seq)
|
|
{
|
|
struct s3c24x0_i2c *i2c = i2c_bus->regs;
|
|
bool is_read = msg->flags & I2C_M_RD;
|
|
uint status;
|
|
uint addr;
|
|
int ret, i;
|
|
|
|
if (!seq)
|
|
setbits_le32(&i2c->iiccon, I2CCON_ACKGEN);
|
|
|
|
/* Get the slave chip address going */
|
|
addr = msg->addr << 1;
|
|
writel(addr, &i2c->iicds);
|
|
status = I2C_TXRX_ENA | I2C_START_STOP;
|
|
if (is_read)
|
|
status |= I2C_MODE_MR;
|
|
else
|
|
status |= I2C_MODE_MT;
|
|
writel(status, &i2c->iicstat);
|
|
if (seq)
|
|
read_write_byte(i2c);
|
|
|
|
/* Wait for chip address to transmit */
|
|
ret = WaitForXfer(i2c);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (is_read) {
|
|
for (i = 0; !ret && i < msg->len; i++) {
|
|
/* disable ACK for final READ */
|
|
if (i == msg->len - 1)
|
|
clrbits_le32(&i2c->iiccon, I2CCON_ACKGEN);
|
|
read_write_byte(i2c);
|
|
ret = WaitForXfer(i2c);
|
|
msg->buf[i] = readl(&i2c->iicds);
|
|
}
|
|
if (ret == I2C_NACK)
|
|
ret = I2C_OK; /* Normal terminated read */
|
|
} else {
|
|
for (i = 0; !ret && i < msg->len; i++) {
|
|
writel(msg->buf[i], &i2c->iicds);
|
|
read_write_byte(i2c);
|
|
ret = WaitForXfer(i2c);
|
|
}
|
|
}
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int s3c24x0_i2c_xfer(struct udevice *dev, struct i2c_msg *msg,
|
|
int nmsgs)
|
|
{
|
|
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
|
|
struct s3c24x0_i2c *i2c = i2c_bus->regs;
|
|
ulong start_time;
|
|
int ret, i;
|
|
|
|
start_time = get_timer(0);
|
|
while (readl(&i2c->iicstat) & I2CSTAT_BSY) {
|
|
if (get_timer(start_time) > I2C_TIMEOUT_MS) {
|
|
debug("Timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
for (ret = 0, i = 0; !ret && i < nmsgs; i++)
|
|
ret = s3c24x0_do_msg(i2c_bus, &msg[i], i);
|
|
|
|
/* Send STOP */
|
|
writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat);
|
|
read_write_byte(i2c);
|
|
|
|
return ret ? -EREMOTEIO : 0;
|
|
}
|
|
|
|
static int s3c_i2c_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
|
|
int node;
|
|
|
|
node = dev_of_offset(dev);
|
|
|
|
i2c_bus->regs = (struct s3c24x0_i2c *)devfdt_get_addr(dev);
|
|
|
|
i2c_bus->id = pinmux_decode_periph_id(blob, node);
|
|
|
|
i2c_bus->clock_frequency = fdtdec_get_int(blob, node,
|
|
"clock-frequency", 100000);
|
|
i2c_bus->node = node;
|
|
i2c_bus->bus_num = dev->seq;
|
|
|
|
exynos_pinmux_config(i2c_bus->id, 0);
|
|
|
|
i2c_bus->active = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_i2c_ops s3c_i2c_ops = {
|
|
.xfer = s3c24x0_i2c_xfer,
|
|
.probe_chip = s3c24x0_i2c_probe,
|
|
.set_bus_speed = s3c24x0_i2c_set_bus_speed,
|
|
};
|
|
|
|
static const struct udevice_id s3c_i2c_ids[] = {
|
|
{ .compatible = "samsung,s3c2440-i2c" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(i2c_s3c) = {
|
|
.name = "i2c_s3c",
|
|
.id = UCLASS_I2C,
|
|
.of_match = s3c_i2c_ids,
|
|
.ofdata_to_platdata = s3c_i2c_ofdata_to_platdata,
|
|
.priv_auto_alloc_size = sizeof(struct s3c24x0_i2c_bus),
|
|
.ops = &s3c_i2c_ops,
|
|
};
|