u-boot/test/py/tests/test_gpio.py
Simon Glass b681669aa5 test: Make test_gpio_read() independent
This assumes that the GPIO starts as 0 but it does not if
test_gpio_input() ran first and test_gpio_exit_statuses() was skipped.
This can happen when running tests in parallel.

Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-12 18:06:36 -04:00

225 lines
7.2 KiB
Python

# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (c) 2021 Adarsh Babu Kalepalli <opensource.kab@gmail.com>
# Copyright (c) 2020 Alex Kiernan <alex.kiernan@gmail.com>
import pytest
import time
import u_boot_utils
"""
test_gpio_input is intended to test the fix 4dbc107f4683.
4dbc107f4683:"cmd: gpio: Correct do_gpio() return value"
"""
@pytest.mark.boardspec('sandbox')
@pytest.mark.buildconfigspec('cmd_gpio')
def test_gpio_input(u_boot_console):
"""Test that gpio input correctly returns the value of a gpio pin."""
response = u_boot_console.run_command('gpio input 0; echo rc:$?')
expected_response = 'rc:0'
assert(expected_response in response)
response = u_boot_console.run_command('gpio toggle 0; gpio input 0; echo rc:$?')
expected_response = 'rc:1'
assert(expected_response in response)
@pytest.mark.boardspec('sandbox')
@pytest.mark.buildconfigspec('cmd_gpio')
def test_gpio_exit_statuses(u_boot_console):
"""Test that non-input gpio commands correctly return the command
success/failure status."""
expected_response = 'rc:0'
response = u_boot_console.run_command('gpio clear 0; echo rc:$?')
assert(expected_response in response)
response = u_boot_console.run_command('gpio set 0; echo rc:$?')
assert(expected_response in response)
response = u_boot_console.run_command('gpio toggle 0; echo rc:$?')
assert(expected_response in response)
response = u_boot_console.run_command('gpio status -a; echo rc:$?')
assert(expected_response in response)
expected_response = 'rc:1'
response = u_boot_console.run_command('gpio nonexistent-command; echo rc:$?')
assert(expected_response in response)
response = u_boot_console.run_command('gpio input 200; echo rc:$?')
assert(expected_response in response)
@pytest.mark.boardspec('sandbox')
@pytest.mark.buildconfigspec('cmd_gpio')
def test_gpio_read(u_boot_console):
"""Test that gpio read correctly sets the variable to the value of a gpio pin."""
u_boot_console.run_command('gpio clear 0')
response = u_boot_console.run_command('gpio read var 0; echo val:$var,rc:$?')
expected_response = 'val:0,rc:0'
assert(expected_response in response)
response = u_boot_console.run_command('gpio toggle 0; gpio read var 0; echo val:$var,rc:$?')
expected_response = 'val:1,rc:0'
assert(expected_response in response)
response = u_boot_console.run_command('setenv var; gpio read var nonexistent-gpio; echo val:$var,rc:$?')
expected_response = 'val:,rc:1'
assert(expected_response in response)
"""
Generic Tests for 'gpio' command on sandbox and real hardware.
The below sequence of tests rely on env__gpio_dev_config for configuration values of gpio pins.
Configuration data for gpio command.
The set,clear,toggle ,input and status options of 'gpio' command are verified.
For sake of verification,A LED/buzzer could be connected to GPIO pins configured as O/P.
Logic level '1'/'0' can be applied onto GPIO pins configured as I/P
env__gpio_dev_config = {
#the number of 'gpio_str_x' strings should equal to
#'gpio_str_count' value
'gpio_str_count':4 ,
'gpio_str_1': '0',
'gpio_str_2': '31',
'gpio_str_3': '63',
'gpio_str_4': '127',
'gpio_op_pin': '64',
'gpio_ip_pin_set':'65',
'gpio_ip_pin_clear':'66',
'gpio_clear_value': 'value is 0',
'gpio_set_value': 'value is 1',
}
"""
@pytest.mark.buildconfigspec('cmd_gpio')
def test_gpio_status_all_generic(u_boot_console):
"""Test the 'gpio status' command.
Displays all gpio pins available on the Board.
To verify if the status of pins is displayed or not,
the user can configure (gpio_str_count) and verify existence of certain
pins.The details of these can be configured in 'gpio_str_n'.
of boardenv_* (example above).User can configure any
number of such pins and mention that count in 'gpio_str_count'.
"""
f = u_boot_console.config.env.get('env__gpio_dev_config',False)
if not f:
pytest.skip("gpio not configured")
gpio_str_count = f['gpio_str_count']
#Display all the GPIO ports
cmd = 'gpio status -a'
response = u_boot_console.run_command(cmd)
for str_value in range(1,gpio_str_count + 1):
assert f["gpio_str_%d" %(str_value)] in response
@pytest.mark.buildconfigspec('cmd_gpio')
def test_gpio_set_generic(u_boot_console):
"""Test the 'gpio set' command.
A specific gpio pin configured by user as output
(mentioned in gpio_op_pin) is verified for
'set' option
"""
f = u_boot_console.config.env.get('env__gpio_dev_config',False)
if not f:
pytest.skip("gpio not configured")
gpio_pin_adr = f['gpio_op_pin'];
gpio_set_value = f['gpio_set_value'];
cmd = 'gpio set ' + gpio_pin_adr
response = u_boot_console.run_command(cmd)
good_response = gpio_set_value
assert good_response in response
@pytest.mark.buildconfigspec('cmd_gpio')
def test_gpio_clear_generic(u_boot_console):
"""Test the 'gpio clear' command.
A specific gpio pin configured by user as output
(mentioned in gpio_op_pin) is verified for
'clear' option
"""
f = u_boot_console.config.env.get('env__gpio_dev_config',False)
if not f:
pytest.skip("gpio not configured")
gpio_pin_adr = f['gpio_op_pin'];
gpio_clear_value = f['gpio_clear_value'];
cmd = 'gpio clear ' + gpio_pin_adr
response = u_boot_console.run_command(cmd)
good_response = gpio_clear_value
assert good_response in response
@pytest.mark.buildconfigspec('cmd_gpio')
def test_gpio_toggle_generic(u_boot_console):
"""Test the 'gpio toggle' command.
A specific gpio pin configured by user as output
(mentioned in gpio_op_pin) is verified for
'toggle' option
"""
f = u_boot_console.config.env.get('env__gpio_dev_config',False)
if not f:
pytest.skip("gpio not configured")
gpio_pin_adr = f['gpio_op_pin'];
gpio_set_value = f['gpio_set_value'];
gpio_clear_value = f['gpio_clear_value'];
cmd = 'gpio set ' + gpio_pin_adr
response = u_boot_console.run_command(cmd)
good_response = gpio_set_value
assert good_response in response
cmd = 'gpio toggle ' + gpio_pin_adr
response = u_boot_console.run_command(cmd)
good_response = gpio_clear_value
assert good_response in response
@pytest.mark.buildconfigspec('cmd_gpio')
def test_gpio_input_generic(u_boot_console):
"""Test the 'gpio input' command.
Specific gpio pins configured by user as input
(mentioned in gpio_ip_pin_set and gpio_ip_pin_clear)
is verified for logic '1' and logic '0' states
"""
f = u_boot_console.config.env.get('env__gpio_dev_config',False)
if not f:
pytest.skip("gpio not configured")
gpio_pin_adr = f['gpio_ip_pin_clear'];
gpio_clear_value = f['gpio_clear_value'];
cmd = 'gpio input ' + gpio_pin_adr
response = u_boot_console.run_command(cmd)
good_response = gpio_clear_value
assert good_response in response
gpio_pin_adr = f['gpio_ip_pin_set'];
gpio_set_value = f['gpio_set_value'];
cmd = 'gpio input ' + gpio_pin_adr
response = u_boot_console.run_command(cmd)
good_response = gpio_set_value
assert good_response in response