mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
532de8d99c
mt7531 is a 7-ports switch with 5 embedded giga phys, and uses the same
MAC design of mt7530. The cpu port6 supports SGMII only. The cpu port5
supports RGMII or SGMII in different model.
mt7531 is connected to mt7622 via both RGMII and SGMII interfaces.
In this patch, mt7531 cpu port5 or port6 is configured to maximum
capability to align CPU MAC setting.
The dts has been committed in the commit 6efa450565
("arm: dts:
mediatek: add ethernet and sgmii dts node for mt7622")
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
1563 lines
38 KiB
C
1563 lines
38 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 MediaTek Inc.
|
|
*
|
|
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
|
* Author: Mark Lee <mark-mc.lee@mediatek.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <regmap.h>
|
|
#include <reset.h>
|
|
#include <syscon.h>
|
|
#include <wait_bit.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/err.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/mdio.h>
|
|
#include <linux/mii.h>
|
|
|
|
#include "mtk_eth.h"
|
|
|
|
#define NUM_TX_DESC 24
|
|
#define NUM_RX_DESC 24
|
|
#define TX_TOTAL_BUF_SIZE (NUM_TX_DESC * PKTSIZE_ALIGN)
|
|
#define RX_TOTAL_BUF_SIZE (NUM_RX_DESC * PKTSIZE_ALIGN)
|
|
#define TOTAL_PKT_BUF_SIZE (TX_TOTAL_BUF_SIZE + RX_TOTAL_BUF_SIZE)
|
|
|
|
#define MT753X_NUM_PHYS 5
|
|
#define MT753X_NUM_PORTS 7
|
|
#define MT753X_DFL_SMI_ADDR 31
|
|
#define MT753X_SMI_ADDR_MASK 0x1f
|
|
|
|
#define MT753X_PHY_ADDR(base, addr) \
|
|
(((base) + (addr)) & 0x1f)
|
|
|
|
#define GDMA_FWD_TO_CPU \
|
|
(0x20000000 | \
|
|
GDM_ICS_EN | \
|
|
GDM_TCS_EN | \
|
|
GDM_UCS_EN | \
|
|
STRP_CRC | \
|
|
(DP_PDMA << MYMAC_DP_S) | \
|
|
(DP_PDMA << BC_DP_S) | \
|
|
(DP_PDMA << MC_DP_S) | \
|
|
(DP_PDMA << UN_DP_S))
|
|
|
|
#define GDMA_FWD_DISCARD \
|
|
(0x20000000 | \
|
|
GDM_ICS_EN | \
|
|
GDM_TCS_EN | \
|
|
GDM_UCS_EN | \
|
|
STRP_CRC | \
|
|
(DP_DISCARD << MYMAC_DP_S) | \
|
|
(DP_DISCARD << BC_DP_S) | \
|
|
(DP_DISCARD << MC_DP_S) | \
|
|
(DP_DISCARD << UN_DP_S))
|
|
|
|
struct pdma_rxd_info1 {
|
|
u32 PDP0;
|
|
};
|
|
|
|
struct pdma_rxd_info2 {
|
|
u32 PLEN1 : 14;
|
|
u32 LS1 : 1;
|
|
u32 UN_USED : 1;
|
|
u32 PLEN0 : 14;
|
|
u32 LS0 : 1;
|
|
u32 DDONE : 1;
|
|
};
|
|
|
|
struct pdma_rxd_info3 {
|
|
u32 PDP1;
|
|
};
|
|
|
|
struct pdma_rxd_info4 {
|
|
u32 FOE_ENTRY : 14;
|
|
u32 CRSN : 5;
|
|
u32 SP : 3;
|
|
u32 L4F : 1;
|
|
u32 L4VLD : 1;
|
|
u32 TACK : 1;
|
|
u32 IP4F : 1;
|
|
u32 IP4 : 1;
|
|
u32 IP6 : 1;
|
|
u32 UN_USED : 4;
|
|
};
|
|
|
|
struct pdma_rxdesc {
|
|
struct pdma_rxd_info1 rxd_info1;
|
|
struct pdma_rxd_info2 rxd_info2;
|
|
struct pdma_rxd_info3 rxd_info3;
|
|
struct pdma_rxd_info4 rxd_info4;
|
|
};
|
|
|
|
struct pdma_txd_info1 {
|
|
u32 SDP0;
|
|
};
|
|
|
|
struct pdma_txd_info2 {
|
|
u32 SDL1 : 14;
|
|
u32 LS1 : 1;
|
|
u32 BURST : 1;
|
|
u32 SDL0 : 14;
|
|
u32 LS0 : 1;
|
|
u32 DDONE : 1;
|
|
};
|
|
|
|
struct pdma_txd_info3 {
|
|
u32 SDP1;
|
|
};
|
|
|
|
struct pdma_txd_info4 {
|
|
u32 VLAN_TAG : 16;
|
|
u32 INS : 1;
|
|
u32 RESV : 2;
|
|
u32 UDF : 6;
|
|
u32 FPORT : 3;
|
|
u32 TSO : 1;
|
|
u32 TUI_CO : 3;
|
|
};
|
|
|
|
struct pdma_txdesc {
|
|
struct pdma_txd_info1 txd_info1;
|
|
struct pdma_txd_info2 txd_info2;
|
|
struct pdma_txd_info3 txd_info3;
|
|
struct pdma_txd_info4 txd_info4;
|
|
};
|
|
|
|
enum mtk_switch {
|
|
SW_NONE,
|
|
SW_MT7530,
|
|
SW_MT7531
|
|
};
|
|
|
|
enum mtk_soc {
|
|
SOC_MT7623,
|
|
SOC_MT7629,
|
|
SOC_MT7622
|
|
};
|
|
|
|
struct mtk_eth_priv {
|
|
char pkt_pool[TOTAL_PKT_BUF_SIZE] __aligned(ARCH_DMA_MINALIGN);
|
|
|
|
struct pdma_txdesc *tx_ring_noc;
|
|
struct pdma_rxdesc *rx_ring_noc;
|
|
|
|
int rx_dma_owner_idx0;
|
|
int tx_cpu_owner_idx0;
|
|
|
|
void __iomem *fe_base;
|
|
void __iomem *gmac_base;
|
|
void __iomem *ethsys_base;
|
|
void __iomem *sgmii_base;
|
|
|
|
struct mii_dev *mdio_bus;
|
|
int (*mii_read)(struct mtk_eth_priv *priv, u8 phy, u8 reg);
|
|
int (*mii_write)(struct mtk_eth_priv *priv, u8 phy, u8 reg, u16 val);
|
|
int (*mmd_read)(struct mtk_eth_priv *priv, u8 addr, u8 devad, u16 reg);
|
|
int (*mmd_write)(struct mtk_eth_priv *priv, u8 addr, u8 devad, u16 reg,
|
|
u16 val);
|
|
|
|
enum mtk_soc soc;
|
|
int gmac_id;
|
|
int force_mode;
|
|
int speed;
|
|
int duplex;
|
|
|
|
struct phy_device *phydev;
|
|
int phy_interface;
|
|
int phy_addr;
|
|
|
|
enum mtk_switch sw;
|
|
int (*switch_init)(struct mtk_eth_priv *priv);
|
|
u32 mt753x_smi_addr;
|
|
u32 mt753x_phy_base;
|
|
|
|
struct gpio_desc rst_gpio;
|
|
int mcm;
|
|
|
|
struct reset_ctl rst_fe;
|
|
struct reset_ctl rst_mcm;
|
|
};
|
|
|
|
static void mtk_pdma_write(struct mtk_eth_priv *priv, u32 reg, u32 val)
|
|
{
|
|
writel(val, priv->fe_base + PDMA_BASE + reg);
|
|
}
|
|
|
|
static void mtk_pdma_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr,
|
|
u32 set)
|
|
{
|
|
clrsetbits_le32(priv->fe_base + PDMA_BASE + reg, clr, set);
|
|
}
|
|
|
|
static void mtk_gdma_write(struct mtk_eth_priv *priv, int no, u32 reg,
|
|
u32 val)
|
|
{
|
|
u32 gdma_base;
|
|
|
|
if (no == 1)
|
|
gdma_base = GDMA2_BASE;
|
|
else
|
|
gdma_base = GDMA1_BASE;
|
|
|
|
writel(val, priv->fe_base + gdma_base + reg);
|
|
}
|
|
|
|
static u32 mtk_gmac_read(struct mtk_eth_priv *priv, u32 reg)
|
|
{
|
|
return readl(priv->gmac_base + reg);
|
|
}
|
|
|
|
static void mtk_gmac_write(struct mtk_eth_priv *priv, u32 reg, u32 val)
|
|
{
|
|
writel(val, priv->gmac_base + reg);
|
|
}
|
|
|
|
static void mtk_gmac_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr, u32 set)
|
|
{
|
|
clrsetbits_le32(priv->gmac_base + reg, clr, set);
|
|
}
|
|
|
|
static void mtk_ethsys_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr,
|
|
u32 set)
|
|
{
|
|
clrsetbits_le32(priv->ethsys_base + reg, clr, set);
|
|
}
|
|
|
|
/* Direct MDIO clause 22/45 access via SoC */
|
|
static int mtk_mii_rw(struct mtk_eth_priv *priv, u8 phy, u8 reg, u16 data,
|
|
u32 cmd, u32 st)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
val = (st << MDIO_ST_S) |
|
|
((cmd << MDIO_CMD_S) & MDIO_CMD_M) |
|
|
(((u32)phy << MDIO_PHY_ADDR_S) & MDIO_PHY_ADDR_M) |
|
|
(((u32)reg << MDIO_REG_ADDR_S) & MDIO_REG_ADDR_M);
|
|
|
|
if (cmd == MDIO_CMD_WRITE)
|
|
val |= data & MDIO_RW_DATA_M;
|
|
|
|
mtk_gmac_write(priv, GMAC_PIAC_REG, val | PHY_ACS_ST);
|
|
|
|
ret = wait_for_bit_le32(priv->gmac_base + GMAC_PIAC_REG,
|
|
PHY_ACS_ST, 0, 5000, 0);
|
|
if (ret) {
|
|
pr_warn("MDIO access timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
if (cmd == MDIO_CMD_READ) {
|
|
val = mtk_gmac_read(priv, GMAC_PIAC_REG);
|
|
return val & MDIO_RW_DATA_M;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Direct MDIO clause 22 read via SoC */
|
|
static int mtk_mii_read(struct mtk_eth_priv *priv, u8 phy, u8 reg)
|
|
{
|
|
return mtk_mii_rw(priv, phy, reg, 0, MDIO_CMD_READ, MDIO_ST_C22);
|
|
}
|
|
|
|
/* Direct MDIO clause 22 write via SoC */
|
|
static int mtk_mii_write(struct mtk_eth_priv *priv, u8 phy, u8 reg, u16 data)
|
|
{
|
|
return mtk_mii_rw(priv, phy, reg, data, MDIO_CMD_WRITE, MDIO_ST_C22);
|
|
}
|
|
|
|
/* Direct MDIO clause 45 read via SoC */
|
|
static int mtk_mmd_read(struct mtk_eth_priv *priv, u8 addr, u8 devad, u16 reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = mtk_mii_rw(priv, addr, devad, reg, MDIO_CMD_ADDR, MDIO_ST_C45);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mtk_mii_rw(priv, addr, devad, 0, MDIO_CMD_READ_C45,
|
|
MDIO_ST_C45);
|
|
}
|
|
|
|
/* Direct MDIO clause 45 write via SoC */
|
|
static int mtk_mmd_write(struct mtk_eth_priv *priv, u8 addr, u8 devad,
|
|
u16 reg, u16 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = mtk_mii_rw(priv, addr, devad, reg, MDIO_CMD_ADDR, MDIO_ST_C45);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mtk_mii_rw(priv, addr, devad, val, MDIO_CMD_WRITE,
|
|
MDIO_ST_C45);
|
|
}
|
|
|
|
/* Indirect MDIO clause 45 read via MII registers */
|
|
static int mtk_mmd_ind_read(struct mtk_eth_priv *priv, u8 addr, u8 devad,
|
|
u16 reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ACC_CTL_REG,
|
|
(MMD_ADDR << MMD_CMD_S) |
|
|
((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ADDR_DATA_REG, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ACC_CTL_REG,
|
|
(MMD_DATA << MMD_CMD_S) |
|
|
((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return priv->mii_read(priv, addr, MII_MMD_ADDR_DATA_REG);
|
|
}
|
|
|
|
/* Indirect MDIO clause 45 write via MII registers */
|
|
static int mtk_mmd_ind_write(struct mtk_eth_priv *priv, u8 addr, u8 devad,
|
|
u16 reg, u16 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ACC_CTL_REG,
|
|
(MMD_ADDR << MMD_CMD_S) |
|
|
((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ADDR_DATA_REG, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ACC_CTL_REG,
|
|
(MMD_DATA << MMD_CMD_S) |
|
|
((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return priv->mii_write(priv, addr, MII_MMD_ADDR_DATA_REG, val);
|
|
}
|
|
|
|
/*
|
|
* MT7530 Internal Register Address Bits
|
|
* -------------------------------------------------------------------
|
|
* | 15 14 13 12 11 10 9 8 7 6 | 5 4 3 2 | 1 0 |
|
|
* |----------------------------------------|---------------|--------|
|
|
* | Page Address | Reg Address | Unused |
|
|
* -------------------------------------------------------------------
|
|
*/
|
|
|
|
static int mt753x_reg_read(struct mtk_eth_priv *priv, u32 reg, u32 *data)
|
|
{
|
|
int ret, low_word, high_word;
|
|
|
|
/* Write page address */
|
|
ret = mtk_mii_write(priv, priv->mt753x_smi_addr, 0x1f, reg >> 6);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Read low word */
|
|
low_word = mtk_mii_read(priv, priv->mt753x_smi_addr, (reg >> 2) & 0xf);
|
|
if (low_word < 0)
|
|
return low_word;
|
|
|
|
/* Read high word */
|
|
high_word = mtk_mii_read(priv, priv->mt753x_smi_addr, 0x10);
|
|
if (high_word < 0)
|
|
return high_word;
|
|
|
|
if (data)
|
|
*data = ((u32)high_word << 16) | (low_word & 0xffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt753x_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 data)
|
|
{
|
|
int ret;
|
|
|
|
/* Write page address */
|
|
ret = mtk_mii_write(priv, priv->mt753x_smi_addr, 0x1f, reg >> 6);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Write low word */
|
|
ret = mtk_mii_write(priv, priv->mt753x_smi_addr, (reg >> 2) & 0xf,
|
|
data & 0xffff);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Write high word */
|
|
return mtk_mii_write(priv, priv->mt753x_smi_addr, 0x10, data >> 16);
|
|
}
|
|
|
|
static void mt753x_reg_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr,
|
|
u32 set)
|
|
{
|
|
u32 val;
|
|
|
|
mt753x_reg_read(priv, reg, &val);
|
|
val &= ~clr;
|
|
val |= set;
|
|
mt753x_reg_write(priv, reg, val);
|
|
}
|
|
|
|
/* Indirect MDIO clause 22/45 access */
|
|
static int mt7531_mii_rw(struct mtk_eth_priv *priv, int phy, int reg, u16 data,
|
|
u32 cmd, u32 st)
|
|
{
|
|
ulong timeout;
|
|
u32 val, timeout_ms;
|
|
int ret = 0;
|
|
|
|
val = (st << MDIO_ST_S) |
|
|
((cmd << MDIO_CMD_S) & MDIO_CMD_M) |
|
|
((phy << MDIO_PHY_ADDR_S) & MDIO_PHY_ADDR_M) |
|
|
((reg << MDIO_REG_ADDR_S) & MDIO_REG_ADDR_M);
|
|
|
|
if (cmd == MDIO_CMD_WRITE || cmd == MDIO_CMD_ADDR)
|
|
val |= data & MDIO_RW_DATA_M;
|
|
|
|
mt753x_reg_write(priv, MT7531_PHY_IAC, val | PHY_ACS_ST);
|
|
|
|
timeout_ms = 100;
|
|
timeout = get_timer(0);
|
|
while (1) {
|
|
mt753x_reg_read(priv, MT7531_PHY_IAC, &val);
|
|
|
|
if ((val & PHY_ACS_ST) == 0)
|
|
break;
|
|
|
|
if (get_timer(timeout) > timeout_ms)
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (cmd == MDIO_CMD_READ || cmd == MDIO_CMD_READ_C45) {
|
|
mt753x_reg_read(priv, MT7531_PHY_IAC, &val);
|
|
ret = val & MDIO_RW_DATA_M;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mt7531_mii_ind_read(struct mtk_eth_priv *priv, u8 phy, u8 reg)
|
|
{
|
|
u8 phy_addr;
|
|
|
|
if (phy >= MT753X_NUM_PHYS)
|
|
return -EINVAL;
|
|
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, phy);
|
|
|
|
return mt7531_mii_rw(priv, phy_addr, reg, 0, MDIO_CMD_READ,
|
|
MDIO_ST_C22);
|
|
}
|
|
|
|
static int mt7531_mii_ind_write(struct mtk_eth_priv *priv, u8 phy, u8 reg,
|
|
u16 val)
|
|
{
|
|
u8 phy_addr;
|
|
|
|
if (phy >= MT753X_NUM_PHYS)
|
|
return -EINVAL;
|
|
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, phy);
|
|
|
|
return mt7531_mii_rw(priv, phy_addr, reg, val, MDIO_CMD_WRITE,
|
|
MDIO_ST_C22);
|
|
}
|
|
|
|
int mt7531_mmd_ind_read(struct mtk_eth_priv *priv, u8 addr, u8 devad, u16 reg)
|
|
{
|
|
u8 phy_addr;
|
|
int ret;
|
|
|
|
if (addr >= MT753X_NUM_PHYS)
|
|
return -EINVAL;
|
|
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, addr);
|
|
|
|
ret = mt7531_mii_rw(priv, phy_addr, devad, reg, MDIO_CMD_ADDR,
|
|
MDIO_ST_C45);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mt7531_mii_rw(priv, phy_addr, devad, 0, MDIO_CMD_READ_C45,
|
|
MDIO_ST_C45);
|
|
}
|
|
|
|
static int mt7531_mmd_ind_write(struct mtk_eth_priv *priv, u8 addr, u8 devad,
|
|
u16 reg, u16 val)
|
|
{
|
|
u8 phy_addr;
|
|
int ret;
|
|
|
|
if (addr >= MT753X_NUM_PHYS)
|
|
return 0;
|
|
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, addr);
|
|
|
|
ret = mt7531_mii_rw(priv, phy_addr, devad, reg, MDIO_CMD_ADDR,
|
|
MDIO_ST_C45);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mt7531_mii_rw(priv, phy_addr, devad, val, MDIO_CMD_WRITE,
|
|
MDIO_ST_C45);
|
|
}
|
|
|
|
static int mtk_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
|
|
{
|
|
struct mtk_eth_priv *priv = bus->priv;
|
|
|
|
if (devad < 0)
|
|
return priv->mii_read(priv, addr, reg);
|
|
else
|
|
return priv->mmd_read(priv, addr, devad, reg);
|
|
}
|
|
|
|
static int mtk_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
|
|
u16 val)
|
|
{
|
|
struct mtk_eth_priv *priv = bus->priv;
|
|
|
|
if (devad < 0)
|
|
return priv->mii_write(priv, addr, reg, val);
|
|
else
|
|
return priv->mmd_write(priv, addr, devad, reg, val);
|
|
}
|
|
|
|
static int mtk_mdio_register(struct udevice *dev)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
struct mii_dev *mdio_bus = mdio_alloc();
|
|
int ret;
|
|
|
|
if (!mdio_bus)
|
|
return -ENOMEM;
|
|
|
|
/* Assign MDIO access APIs according to the switch/phy */
|
|
switch (priv->sw) {
|
|
case SW_MT7530:
|
|
priv->mii_read = mtk_mii_read;
|
|
priv->mii_write = mtk_mii_write;
|
|
priv->mmd_read = mtk_mmd_ind_read;
|
|
priv->mmd_write = mtk_mmd_ind_write;
|
|
break;
|
|
case SW_MT7531:
|
|
priv->mii_read = mt7531_mii_ind_read;
|
|
priv->mii_write = mt7531_mii_ind_write;
|
|
priv->mmd_read = mt7531_mmd_ind_read;
|
|
priv->mmd_write = mt7531_mmd_ind_write;
|
|
break;
|
|
default:
|
|
priv->mii_read = mtk_mii_read;
|
|
priv->mii_write = mtk_mii_write;
|
|
priv->mmd_read = mtk_mmd_read;
|
|
priv->mmd_write = mtk_mmd_write;
|
|
}
|
|
|
|
mdio_bus->read = mtk_mdio_read;
|
|
mdio_bus->write = mtk_mdio_write;
|
|
snprintf(mdio_bus->name, sizeof(mdio_bus->name), dev->name);
|
|
|
|
mdio_bus->priv = (void *)priv;
|
|
|
|
ret = mdio_register(mdio_bus);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->mdio_bus = mdio_bus;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt753x_core_reg_read(struct mtk_eth_priv *priv, u32 reg)
|
|
{
|
|
u8 phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, 0);
|
|
|
|
return priv->mmd_read(priv, phy_addr, 0x1f, reg);
|
|
}
|
|
|
|
static void mt753x_core_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 val)
|
|
{
|
|
u8 phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, 0);
|
|
|
|
priv->mmd_write(priv, phy_addr, 0x1f, reg, val);
|
|
}
|
|
|
|
static int mt7530_pad_clk_setup(struct mtk_eth_priv *priv, int mode)
|
|
{
|
|
u32 ncpo1, ssc_delta;
|
|
|
|
switch (mode) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
ncpo1 = 0x0c80;
|
|
ssc_delta = 0x87;
|
|
break;
|
|
default:
|
|
printf("error: xMII mode %d not supported\n", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Disable MT7530 core clock */
|
|
mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, 0);
|
|
|
|
/* Disable MT7530 PLL */
|
|
mt753x_core_reg_write(priv, CORE_GSWPLL_GRP1,
|
|
(2 << RG_GSWPLL_POSDIV_200M_S) |
|
|
(32 << RG_GSWPLL_FBKDIV_200M_S));
|
|
|
|
/* For MT7530 core clock = 500Mhz */
|
|
mt753x_core_reg_write(priv, CORE_GSWPLL_GRP2,
|
|
(1 << RG_GSWPLL_POSDIV_500M_S) |
|
|
(25 << RG_GSWPLL_FBKDIV_500M_S));
|
|
|
|
/* Enable MT7530 PLL */
|
|
mt753x_core_reg_write(priv, CORE_GSWPLL_GRP1,
|
|
(2 << RG_GSWPLL_POSDIV_200M_S) |
|
|
(32 << RG_GSWPLL_FBKDIV_200M_S) |
|
|
RG_GSWPLL_EN_PRE);
|
|
|
|
udelay(20);
|
|
|
|
mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
|
|
|
|
/* Setup the MT7530 TRGMII Tx Clock */
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP5, ncpo1);
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP6, 0);
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP10, ssc_delta);
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP11, ssc_delta);
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN |
|
|
RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN);
|
|
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP2,
|
|
RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
|
|
(1 << RG_SYSPLL_POSDIV_S));
|
|
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP7,
|
|
RG_LCDDS_PCW_NCPO_CHG | (3 << RG_LCCDS_C_S) |
|
|
RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
|
|
|
|
/* Enable MT7530 core clock */
|
|
mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG,
|
|
REG_GSWCK_EN | REG_TRGMIICK_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7530_setup(struct mtk_eth_priv *priv)
|
|
{
|
|
u16 phy_addr, phy_val;
|
|
u32 val;
|
|
int i;
|
|
|
|
/* Select 250MHz clk for RGMII mode */
|
|
mtk_ethsys_rmw(priv, ETHSYS_CLKCFG0_REG,
|
|
ETHSYS_TRGMII_CLK_SEL362_5, 0);
|
|
|
|
/* Modify HWTRAP first to allow direct access to internal PHYs */
|
|
mt753x_reg_read(priv, HWTRAP_REG, &val);
|
|
val |= CHG_TRAP;
|
|
val &= ~C_MDIO_BPS;
|
|
mt753x_reg_write(priv, MHWTRAP_REG, val);
|
|
|
|
/* Calculate the phy base address */
|
|
val = ((val & SMI_ADDR_M) >> SMI_ADDR_S) << 3;
|
|
priv->mt753x_phy_base = (val | 0x7) + 1;
|
|
|
|
/* Turn off PHYs */
|
|
for (i = 0; i < MT753X_NUM_PHYS; i++) {
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i);
|
|
phy_val = priv->mii_read(priv, phy_addr, MII_BMCR);
|
|
phy_val |= BMCR_PDOWN;
|
|
priv->mii_write(priv, phy_addr, MII_BMCR, phy_val);
|
|
}
|
|
|
|
/* Force MAC link down before reset */
|
|
mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE);
|
|
mt753x_reg_write(priv, PMCR_REG(6), FORCE_MODE);
|
|
|
|
/* MT7530 reset */
|
|
mt753x_reg_write(priv, SYS_CTRL_REG, SW_SYS_RST | SW_REG_RST);
|
|
udelay(100);
|
|
|
|
val = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
|
|
MAC_MODE | FORCE_MODE |
|
|
MAC_TX_EN | MAC_RX_EN |
|
|
BKOFF_EN | BACKPR_EN |
|
|
(SPEED_1000M << FORCE_SPD_S) |
|
|
FORCE_DPX | FORCE_LINK;
|
|
|
|
/* MT7530 Port6: Forced 1000M/FD, FC disabled */
|
|
mt753x_reg_write(priv, PMCR_REG(6), val);
|
|
|
|
/* MT7530 Port5: Forced link down */
|
|
mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE);
|
|
|
|
/* MT7530 Port6: Set to RGMII */
|
|
mt753x_reg_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_M, P6_INTF_MODE_RGMII);
|
|
|
|
/* Hardware Trap: Enable Port6, Disable Port5 */
|
|
mt753x_reg_read(priv, HWTRAP_REG, &val);
|
|
val |= CHG_TRAP | LOOPDET_DIS | P5_INTF_DIS |
|
|
(P5_INTF_SEL_GMAC5 << P5_INTF_SEL_S) |
|
|
(P5_INTF_MODE_RGMII << P5_INTF_MODE_S);
|
|
val &= ~(C_MDIO_BPS | P6_INTF_DIS);
|
|
mt753x_reg_write(priv, MHWTRAP_REG, val);
|
|
|
|
/* Setup switch core pll */
|
|
mt7530_pad_clk_setup(priv, priv->phy_interface);
|
|
|
|
/* Lower Tx Driving for TRGMII path */
|
|
for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
|
|
mt753x_reg_write(priv, MT7530_TRGMII_TD_ODT(i),
|
|
(8 << TD_DM_DRVP_S) | (8 << TD_DM_DRVN_S));
|
|
|
|
for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
|
|
mt753x_reg_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_M, 16);
|
|
|
|
/* Turn on PHYs */
|
|
for (i = 0; i < MT753X_NUM_PHYS; i++) {
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i);
|
|
phy_val = priv->mii_read(priv, phy_addr, MII_BMCR);
|
|
phy_val &= ~BMCR_PDOWN;
|
|
priv->mii_write(priv, phy_addr, MII_BMCR, phy_val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mt7531_core_pll_setup(struct mtk_eth_priv *priv, int mcm)
|
|
{
|
|
/* Step 1 : Disable MT7531 COREPLL */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_EN, EN_COREPLL, 0);
|
|
|
|
/* Step 2: switch to XTAL output */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_EN, SW_CLKSW, SW_CLKSW);
|
|
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_EN, 0);
|
|
|
|
/* Step 3: disable PLLGP and enable program PLLGP */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_EN, SW_PLLGP, SW_PLLGP);
|
|
|
|
/* Step 4: program COREPLL output frequency to 500MHz */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_POSDIV_M,
|
|
2 << RG_COREPLL_POSDIV_S);
|
|
udelay(25);
|
|
|
|
/* Currently, support XTAL 25Mhz only */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_M,
|
|
0x140000 << RG_COREPLL_SDM_PCW_S);
|
|
|
|
/* Set feedback divide ratio update signal to high */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_CHG,
|
|
RG_COREPLL_SDM_PCW_CHG);
|
|
|
|
/* Wait for at least 16 XTAL clocks */
|
|
udelay(10);
|
|
|
|
/* Step 5: set feedback divide ratio update signal to low */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_CHG, 0);
|
|
|
|
/* add enable 325M clock for SGMII */
|
|
mt753x_reg_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000);
|
|
|
|
/* add enable 250SSC clock for RGMII */
|
|
mt753x_reg_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000);
|
|
|
|
/*Step 6: Enable MT7531 PLL */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_EN, RG_COREPLL_EN);
|
|
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_EN, EN_COREPLL, EN_COREPLL);
|
|
|
|
udelay(25);
|
|
}
|
|
|
|
static int mt7531_port_sgmii_init(struct mtk_eth_priv *priv,
|
|
u32 port)
|
|
{
|
|
if (port != 5 && port != 6) {
|
|
printf("mt7531: port %d is not a SGMII port\n", port);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set SGMII GEN2 speed(2.5G) */
|
|
mt753x_reg_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port),
|
|
SGMSYS_SPEED_2500, SGMSYS_SPEED_2500);
|
|
|
|
/* Disable SGMII AN */
|
|
mt753x_reg_rmw(priv, MT7531_PCS_CONTROL_1(port),
|
|
SGMII_AN_ENABLE, 0);
|
|
|
|
/* SGMII force mode setting */
|
|
mt753x_reg_write(priv, MT7531_SGMII_MODE(port), SGMII_FORCE_MODE);
|
|
|
|
/* Release PHYA power down state */
|
|
mt753x_reg_rmw(priv, MT7531_QPHY_PWR_STATE_CTRL(port),
|
|
SGMII_PHYA_PWD, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7531_port_rgmii_init(struct mtk_eth_priv *priv, u32 port)
|
|
{
|
|
u32 val;
|
|
|
|
if (port != 5) {
|
|
printf("error: RGMII mode is not available for port %d\n",
|
|
port);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mt753x_reg_read(priv, MT7531_CLKGEN_CTRL, &val);
|
|
val |= GP_CLK_EN;
|
|
val &= ~GP_MODE_M;
|
|
val |= GP_MODE_RGMII << GP_MODE_S;
|
|
val |= TXCLK_NO_REVERSE;
|
|
val |= RXCLK_NO_DELAY;
|
|
val &= ~CLK_SKEW_IN_M;
|
|
val |= CLK_SKEW_IN_NO_CHANGE << CLK_SKEW_IN_S;
|
|
val &= ~CLK_SKEW_OUT_M;
|
|
val |= CLK_SKEW_OUT_NO_CHANGE << CLK_SKEW_OUT_S;
|
|
mt753x_reg_write(priv, MT7531_CLKGEN_CTRL, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mt7531_phy_setting(struct mtk_eth_priv *priv)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
for (i = 0; i < MT753X_NUM_PHYS; i++) {
|
|
/* Enable HW auto downshift */
|
|
priv->mii_write(priv, i, 0x1f, 0x1);
|
|
val = priv->mii_read(priv, i, PHY_EXT_REG_14);
|
|
val |= PHY_EN_DOWN_SHFIT;
|
|
priv->mii_write(priv, i, PHY_EXT_REG_14, val);
|
|
|
|
/* PHY link down power saving enable */
|
|
val = priv->mii_read(priv, i, PHY_EXT_REG_17);
|
|
val |= PHY_LINKDOWN_POWER_SAVING_EN;
|
|
priv->mii_write(priv, i, PHY_EXT_REG_17, val);
|
|
|
|
val = priv->mmd_read(priv, i, 0x1e, PHY_DEV1E_REG_0C6);
|
|
val &= ~PHY_POWER_SAVING_M;
|
|
val |= PHY_POWER_SAVING_TX << PHY_POWER_SAVING_S;
|
|
priv->mmd_write(priv, i, 0x1e, PHY_DEV1E_REG_0C6, val);
|
|
}
|
|
}
|
|
|
|
static int mt7531_setup(struct mtk_eth_priv *priv)
|
|
{
|
|
u16 phy_addr, phy_val;
|
|
u32 val;
|
|
u32 pmcr;
|
|
u32 port5_sgmii;
|
|
int i;
|
|
|
|
priv->mt753x_phy_base = (priv->mt753x_smi_addr + 1) &
|
|
MT753X_SMI_ADDR_MASK;
|
|
|
|
/* Turn off PHYs */
|
|
for (i = 0; i < MT753X_NUM_PHYS; i++) {
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i);
|
|
phy_val = priv->mii_read(priv, phy_addr, MII_BMCR);
|
|
phy_val |= BMCR_PDOWN;
|
|
priv->mii_write(priv, phy_addr, MII_BMCR, phy_val);
|
|
}
|
|
|
|
/* Force MAC link down before reset */
|
|
mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE_LNK);
|
|
mt753x_reg_write(priv, PMCR_REG(6), FORCE_MODE_LNK);
|
|
|
|
/* Switch soft reset */
|
|
mt753x_reg_write(priv, SYS_CTRL_REG, SW_SYS_RST | SW_REG_RST);
|
|
udelay(100);
|
|
|
|
/* Enable MDC input Schmitt Trigger */
|
|
mt753x_reg_rmw(priv, MT7531_SMT0_IOLB, SMT_IOLB_5_SMI_MDC_EN,
|
|
SMT_IOLB_5_SMI_MDC_EN);
|
|
|
|
mt7531_core_pll_setup(priv, priv->mcm);
|
|
|
|
mt753x_reg_read(priv, MT7531_TOP_SIG_SR, &val);
|
|
port5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
|
|
|
|
/* port5 support either RGMII or SGMII, port6 only support SGMII. */
|
|
switch (priv->phy_interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
if (!port5_sgmii)
|
|
mt7531_port_rgmii_init(priv, 5);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
mt7531_port_sgmii_init(priv, 6);
|
|
if (port5_sgmii)
|
|
mt7531_port_sgmii_init(priv, 5);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
pmcr = MT7531_FORCE_MODE |
|
|
(IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
|
|
MAC_MODE | MAC_TX_EN | MAC_RX_EN |
|
|
BKOFF_EN | BACKPR_EN |
|
|
FORCE_RX_FC | FORCE_TX_FC |
|
|
(SPEED_1000M << FORCE_SPD_S) | FORCE_DPX |
|
|
FORCE_LINK;
|
|
|
|
mt753x_reg_write(priv, PMCR_REG(5), pmcr);
|
|
mt753x_reg_write(priv, PMCR_REG(6), pmcr);
|
|
|
|
/* Turn on PHYs */
|
|
for (i = 0; i < MT753X_NUM_PHYS; i++) {
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i);
|
|
phy_val = priv->mii_read(priv, phy_addr, MII_BMCR);
|
|
phy_val &= ~BMCR_PDOWN;
|
|
priv->mii_write(priv, phy_addr, MII_BMCR, phy_val);
|
|
}
|
|
|
|
mt7531_phy_setting(priv);
|
|
|
|
/* Enable Internal PHYs */
|
|
val = mt753x_core_reg_read(priv, CORE_PLL_GROUP4);
|
|
val |= MT7531_BYPASS_MODE;
|
|
val &= ~MT7531_POWER_ON_OFF;
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP4, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mt753x_switch_init(struct mtk_eth_priv *priv)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
/* Global reset switch */
|
|
if (priv->mcm) {
|
|
reset_assert(&priv->rst_mcm);
|
|
udelay(1000);
|
|
reset_deassert(&priv->rst_mcm);
|
|
mdelay(1000);
|
|
} else if (dm_gpio_is_valid(&priv->rst_gpio)) {
|
|
dm_gpio_set_value(&priv->rst_gpio, 0);
|
|
udelay(1000);
|
|
dm_gpio_set_value(&priv->rst_gpio, 1);
|
|
mdelay(1000);
|
|
}
|
|
|
|
ret = priv->switch_init(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Set port isolation */
|
|
for (i = 0; i < MT753X_NUM_PORTS; i++) {
|
|
/* Set port matrix mode */
|
|
if (i != 6)
|
|
mt753x_reg_write(priv, PCR_REG(i),
|
|
(0x40 << PORT_MATRIX_S));
|
|
else
|
|
mt753x_reg_write(priv, PCR_REG(i),
|
|
(0x3f << PORT_MATRIX_S));
|
|
|
|
/* Set port mode to user port */
|
|
mt753x_reg_write(priv, PVC_REG(i),
|
|
(0x8100 << STAG_VPID_S) |
|
|
(VLAN_ATTR_USER << VLAN_ATTR_S));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mtk_phy_link_adjust(struct mtk_eth_priv *priv)
|
|
{
|
|
u16 lcl_adv = 0, rmt_adv = 0;
|
|
u8 flowctrl;
|
|
u32 mcr;
|
|
|
|
mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
|
|
(MAC_RX_PKT_LEN_1536 << MAC_RX_PKT_LEN_S) |
|
|
MAC_MODE | FORCE_MODE |
|
|
MAC_TX_EN | MAC_RX_EN |
|
|
BKOFF_EN | BACKPR_EN;
|
|
|
|
switch (priv->phydev->speed) {
|
|
case SPEED_10:
|
|
mcr |= (SPEED_10M << FORCE_SPD_S);
|
|
break;
|
|
case SPEED_100:
|
|
mcr |= (SPEED_100M << FORCE_SPD_S);
|
|
break;
|
|
case SPEED_1000:
|
|
mcr |= (SPEED_1000M << FORCE_SPD_S);
|
|
break;
|
|
};
|
|
|
|
if (priv->phydev->link)
|
|
mcr |= FORCE_LINK;
|
|
|
|
if (priv->phydev->duplex) {
|
|
mcr |= FORCE_DPX;
|
|
|
|
if (priv->phydev->pause)
|
|
rmt_adv = LPA_PAUSE_CAP;
|
|
if (priv->phydev->asym_pause)
|
|
rmt_adv |= LPA_PAUSE_ASYM;
|
|
|
|
if (priv->phydev->advertising & ADVERTISED_Pause)
|
|
lcl_adv |= ADVERTISE_PAUSE_CAP;
|
|
if (priv->phydev->advertising & ADVERTISED_Asym_Pause)
|
|
lcl_adv |= ADVERTISE_PAUSE_ASYM;
|
|
|
|
flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
|
|
|
|
if (flowctrl & FLOW_CTRL_TX)
|
|
mcr |= FORCE_TX_FC;
|
|
if (flowctrl & FLOW_CTRL_RX)
|
|
mcr |= FORCE_RX_FC;
|
|
|
|
debug("rx pause %s, tx pause %s\n",
|
|
flowctrl & FLOW_CTRL_RX ? "enabled" : "disabled",
|
|
flowctrl & FLOW_CTRL_TX ? "enabled" : "disabled");
|
|
}
|
|
|
|
mtk_gmac_write(priv, GMAC_PORT_MCR(priv->gmac_id), mcr);
|
|
}
|
|
|
|
static int mtk_phy_start(struct mtk_eth_priv *priv)
|
|
{
|
|
struct phy_device *phydev = priv->phydev;
|
|
int ret;
|
|
|
|
ret = phy_startup(phydev);
|
|
|
|
if (ret) {
|
|
debug("Could not initialize PHY %s\n", phydev->dev->name);
|
|
return ret;
|
|
}
|
|
|
|
if (!phydev->link) {
|
|
debug("%s: link down.\n", phydev->dev->name);
|
|
return 0;
|
|
}
|
|
|
|
mtk_phy_link_adjust(priv);
|
|
|
|
debug("Speed: %d, %s duplex%s\n", phydev->speed,
|
|
(phydev->duplex) ? "full" : "half",
|
|
(phydev->port == PORT_FIBRE) ? ", fiber mode" : "");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_phy_probe(struct udevice *dev)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
struct phy_device *phydev;
|
|
|
|
phydev = phy_connect(priv->mdio_bus, priv->phy_addr, dev,
|
|
priv->phy_interface);
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
phydev->supported &= PHY_GBIT_FEATURES;
|
|
phydev->advertising = phydev->supported;
|
|
|
|
priv->phydev = phydev;
|
|
phy_config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mtk_sgmii_init(struct mtk_eth_priv *priv)
|
|
{
|
|
/* Set SGMII GEN2 speed(2.5G) */
|
|
clrsetbits_le32(priv->sgmii_base + SGMSYS_GEN2_SPEED,
|
|
SGMSYS_SPEED_2500, SGMSYS_SPEED_2500);
|
|
|
|
/* Disable SGMII AN */
|
|
clrsetbits_le32(priv->sgmii_base + SGMSYS_PCS_CONTROL_1,
|
|
SGMII_AN_ENABLE, 0);
|
|
|
|
/* SGMII force mode setting */
|
|
writel(SGMII_FORCE_MODE, priv->sgmii_base + SGMSYS_SGMII_MODE);
|
|
|
|
/* Release PHYA power down state */
|
|
clrsetbits_le32(priv->sgmii_base + SGMSYS_QPHY_PWR_STATE_CTRL,
|
|
SGMII_PHYA_PWD, 0);
|
|
}
|
|
|
|
static void mtk_mac_init(struct mtk_eth_priv *priv)
|
|
{
|
|
int i, ge_mode = 0;
|
|
u32 mcr;
|
|
|
|
switch (priv->phy_interface) {
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
ge_mode = GE_MODE_RGMII;
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
ge_mode = GE_MODE_RGMII;
|
|
mtk_ethsys_rmw(priv, ETHSYS_SYSCFG0_REG, SYSCFG0_SGMII_SEL_M,
|
|
SYSCFG0_SGMII_SEL(priv->gmac_id));
|
|
mtk_sgmii_init(priv);
|
|
break;
|
|
case PHY_INTERFACE_MODE_MII:
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
ge_mode = GE_MODE_MII;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
ge_mode = GE_MODE_RMII;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* set the gmac to the right mode */
|
|
mtk_ethsys_rmw(priv, ETHSYS_SYSCFG0_REG,
|
|
SYSCFG0_GE_MODE_M << SYSCFG0_GE_MODE_S(priv->gmac_id),
|
|
ge_mode << SYSCFG0_GE_MODE_S(priv->gmac_id));
|
|
|
|
if (priv->force_mode) {
|
|
mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
|
|
(MAC_RX_PKT_LEN_1536 << MAC_RX_PKT_LEN_S) |
|
|
MAC_MODE | FORCE_MODE |
|
|
MAC_TX_EN | MAC_RX_EN |
|
|
BKOFF_EN | BACKPR_EN |
|
|
FORCE_LINK;
|
|
|
|
switch (priv->speed) {
|
|
case SPEED_10:
|
|
mcr |= SPEED_10M << FORCE_SPD_S;
|
|
break;
|
|
case SPEED_100:
|
|
mcr |= SPEED_100M << FORCE_SPD_S;
|
|
break;
|
|
case SPEED_1000:
|
|
mcr |= SPEED_1000M << FORCE_SPD_S;
|
|
break;
|
|
}
|
|
|
|
if (priv->duplex)
|
|
mcr |= FORCE_DPX;
|
|
|
|
mtk_gmac_write(priv, GMAC_PORT_MCR(priv->gmac_id), mcr);
|
|
}
|
|
|
|
if (priv->soc == SOC_MT7623) {
|
|
/* Lower Tx Driving for TRGMII path */
|
|
for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
|
|
mtk_gmac_write(priv, GMAC_TRGMII_TD_ODT(i),
|
|
(8 << TD_DM_DRVP_S) |
|
|
(8 << TD_DM_DRVN_S));
|
|
|
|
mtk_gmac_rmw(priv, GMAC_TRGMII_RCK_CTRL, 0,
|
|
RX_RST | RXC_DQSISEL);
|
|
mtk_gmac_rmw(priv, GMAC_TRGMII_RCK_CTRL, RX_RST, 0);
|
|
}
|
|
}
|
|
|
|
static void mtk_eth_fifo_init(struct mtk_eth_priv *priv)
|
|
{
|
|
char *pkt_base = priv->pkt_pool;
|
|
int i;
|
|
|
|
mtk_pdma_rmw(priv, PDMA_GLO_CFG_REG, 0xffff0000, 0);
|
|
udelay(500);
|
|
|
|
memset(priv->tx_ring_noc, 0, NUM_TX_DESC * sizeof(struct pdma_txdesc));
|
|
memset(priv->rx_ring_noc, 0, NUM_RX_DESC * sizeof(struct pdma_rxdesc));
|
|
memset(priv->pkt_pool, 0, TOTAL_PKT_BUF_SIZE);
|
|
|
|
flush_dcache_range((ulong)pkt_base,
|
|
(ulong)(pkt_base + TOTAL_PKT_BUF_SIZE));
|
|
|
|
priv->rx_dma_owner_idx0 = 0;
|
|
priv->tx_cpu_owner_idx0 = 0;
|
|
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
priv->tx_ring_noc[i].txd_info2.LS0 = 1;
|
|
priv->tx_ring_noc[i].txd_info2.DDONE = 1;
|
|
priv->tx_ring_noc[i].txd_info4.FPORT = priv->gmac_id + 1;
|
|
|
|
priv->tx_ring_noc[i].txd_info1.SDP0 = virt_to_phys(pkt_base);
|
|
pkt_base += PKTSIZE_ALIGN;
|
|
}
|
|
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
priv->rx_ring_noc[i].rxd_info2.PLEN0 = PKTSIZE_ALIGN;
|
|
priv->rx_ring_noc[i].rxd_info1.PDP0 = virt_to_phys(pkt_base);
|
|
pkt_base += PKTSIZE_ALIGN;
|
|
}
|
|
|
|
mtk_pdma_write(priv, TX_BASE_PTR_REG(0),
|
|
virt_to_phys(priv->tx_ring_noc));
|
|
mtk_pdma_write(priv, TX_MAX_CNT_REG(0), NUM_TX_DESC);
|
|
mtk_pdma_write(priv, TX_CTX_IDX_REG(0), priv->tx_cpu_owner_idx0);
|
|
|
|
mtk_pdma_write(priv, RX_BASE_PTR_REG(0),
|
|
virt_to_phys(priv->rx_ring_noc));
|
|
mtk_pdma_write(priv, RX_MAX_CNT_REG(0), NUM_RX_DESC);
|
|
mtk_pdma_write(priv, RX_CRX_IDX_REG(0), NUM_RX_DESC - 1);
|
|
|
|
mtk_pdma_write(priv, PDMA_RST_IDX_REG, RST_DTX_IDX0 | RST_DRX_IDX0);
|
|
}
|
|
|
|
static int mtk_eth_start(struct udevice *dev)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
/* Reset FE */
|
|
reset_assert(&priv->rst_fe);
|
|
udelay(1000);
|
|
reset_deassert(&priv->rst_fe);
|
|
mdelay(10);
|
|
|
|
/* Packets forward to PDMA */
|
|
mtk_gdma_write(priv, priv->gmac_id, GDMA_IG_CTRL_REG, GDMA_FWD_TO_CPU);
|
|
|
|
if (priv->gmac_id == 0)
|
|
mtk_gdma_write(priv, 1, GDMA_IG_CTRL_REG, GDMA_FWD_DISCARD);
|
|
else
|
|
mtk_gdma_write(priv, 0, GDMA_IG_CTRL_REG, GDMA_FWD_DISCARD);
|
|
|
|
udelay(500);
|
|
|
|
mtk_eth_fifo_init(priv);
|
|
|
|
/* Start PHY */
|
|
if (priv->sw == SW_NONE) {
|
|
ret = mtk_phy_start(priv);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
mtk_pdma_rmw(priv, PDMA_GLO_CFG_REG, 0,
|
|
TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
|
|
udelay(500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mtk_eth_stop(struct udevice *dev)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
mtk_pdma_rmw(priv, PDMA_GLO_CFG_REG,
|
|
TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN, 0);
|
|
udelay(500);
|
|
|
|
wait_for_bit_le32(priv->fe_base + PDMA_BASE + PDMA_GLO_CFG_REG,
|
|
RX_DMA_BUSY | TX_DMA_BUSY, 0, 5000, 0);
|
|
}
|
|
|
|
static int mtk_eth_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
unsigned char *mac = pdata->enetaddr;
|
|
u32 macaddr_lsb, macaddr_msb;
|
|
|
|
macaddr_msb = ((u32)mac[0] << 8) | (u32)mac[1];
|
|
macaddr_lsb = ((u32)mac[2] << 24) | ((u32)mac[3] << 16) |
|
|
((u32)mac[4] << 8) | (u32)mac[5];
|
|
|
|
mtk_gdma_write(priv, priv->gmac_id, GDMA_MAC_MSB_REG, macaddr_msb);
|
|
mtk_gdma_write(priv, priv->gmac_id, GDMA_MAC_LSB_REG, macaddr_lsb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
u32 idx = priv->tx_cpu_owner_idx0;
|
|
void *pkt_base;
|
|
|
|
if (!priv->tx_ring_noc[idx].txd_info2.DDONE) {
|
|
debug("mtk-eth: TX DMA descriptor ring is full\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
pkt_base = (void *)phys_to_virt(priv->tx_ring_noc[idx].txd_info1.SDP0);
|
|
memcpy(pkt_base, packet, length);
|
|
flush_dcache_range((ulong)pkt_base, (ulong)pkt_base +
|
|
roundup(length, ARCH_DMA_MINALIGN));
|
|
|
|
priv->tx_ring_noc[idx].txd_info2.SDL0 = length;
|
|
priv->tx_ring_noc[idx].txd_info2.DDONE = 0;
|
|
|
|
priv->tx_cpu_owner_idx0 = (priv->tx_cpu_owner_idx0 + 1) % NUM_TX_DESC;
|
|
mtk_pdma_write(priv, TX_CTX_IDX_REG(0), priv->tx_cpu_owner_idx0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
u32 idx = priv->rx_dma_owner_idx0;
|
|
uchar *pkt_base;
|
|
u32 length;
|
|
|
|
if (!priv->rx_ring_noc[idx].rxd_info2.DDONE) {
|
|
debug("mtk-eth: RX DMA descriptor ring is empty\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
length = priv->rx_ring_noc[idx].rxd_info2.PLEN0;
|
|
pkt_base = (void *)phys_to_virt(priv->rx_ring_noc[idx].rxd_info1.PDP0);
|
|
invalidate_dcache_range((ulong)pkt_base, (ulong)pkt_base +
|
|
roundup(length, ARCH_DMA_MINALIGN));
|
|
|
|
if (packetp)
|
|
*packetp = pkt_base;
|
|
|
|
return length;
|
|
}
|
|
|
|
static int mtk_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
u32 idx = priv->rx_dma_owner_idx0;
|
|
|
|
priv->rx_ring_noc[idx].rxd_info2.DDONE = 0;
|
|
priv->rx_ring_noc[idx].rxd_info2.LS0 = 0;
|
|
priv->rx_ring_noc[idx].rxd_info2.PLEN0 = PKTSIZE_ALIGN;
|
|
|
|
mtk_pdma_write(priv, RX_CRX_IDX_REG(0), idx);
|
|
priv->rx_dma_owner_idx0 = (priv->rx_dma_owner_idx0 + 1) % NUM_RX_DESC;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_eth_probe(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
ulong iobase = pdata->iobase;
|
|
int ret;
|
|
|
|
/* Frame Engine Register Base */
|
|
priv->fe_base = (void *)iobase;
|
|
|
|
/* GMAC Register Base */
|
|
priv->gmac_base = (void *)(iobase + GMAC_BASE);
|
|
|
|
/* MDIO register */
|
|
ret = mtk_mdio_register(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Prepare for tx/rx rings */
|
|
priv->tx_ring_noc = (struct pdma_txdesc *)
|
|
noncached_alloc(sizeof(struct pdma_txdesc) * NUM_TX_DESC,
|
|
ARCH_DMA_MINALIGN);
|
|
priv->rx_ring_noc = (struct pdma_rxdesc *)
|
|
noncached_alloc(sizeof(struct pdma_rxdesc) * NUM_RX_DESC,
|
|
ARCH_DMA_MINALIGN);
|
|
|
|
/* Set MAC mode */
|
|
mtk_mac_init(priv);
|
|
|
|
/* Probe phy if switch is not specified */
|
|
if (priv->sw == SW_NONE)
|
|
return mtk_phy_probe(dev);
|
|
|
|
/* Initialize switch */
|
|
return mt753x_switch_init(priv);
|
|
}
|
|
|
|
static int mtk_eth_remove(struct udevice *dev)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
/* MDIO unregister */
|
|
mdio_unregister(priv->mdio_bus);
|
|
mdio_free(priv->mdio_bus);
|
|
|
|
/* Stop possibly started DMA */
|
|
mtk_eth_stop(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_eth_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
struct ofnode_phandle_args args;
|
|
struct regmap *regmap;
|
|
const char *str;
|
|
ofnode subnode;
|
|
int ret;
|
|
|
|
priv->soc = dev_get_driver_data(dev);
|
|
|
|
pdata->iobase = devfdt_get_addr(dev);
|
|
|
|
/* get corresponding ethsys phandle */
|
|
ret = dev_read_phandle_with_args(dev, "mediatek,ethsys", NULL, 0, 0,
|
|
&args);
|
|
if (ret)
|
|
return ret;
|
|
|
|
regmap = syscon_node_to_regmap(args.node);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
priv->ethsys_base = regmap_get_range(regmap, 0);
|
|
if (!priv->ethsys_base) {
|
|
dev_err(dev, "Unable to find ethsys\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Reset controllers */
|
|
ret = reset_get_by_name(dev, "fe", &priv->rst_fe);
|
|
if (ret) {
|
|
printf("error: Unable to get reset ctrl for frame engine\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->gmac_id = dev_read_u32_default(dev, "mediatek,gmac-id", 0);
|
|
|
|
/* Interface mode is required */
|
|
str = dev_read_string(dev, "phy-mode");
|
|
if (str) {
|
|
pdata->phy_interface = phy_get_interface_by_name(str);
|
|
priv->phy_interface = pdata->phy_interface;
|
|
} else {
|
|
printf("error: phy-mode is not set\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Force mode or autoneg */
|
|
subnode = ofnode_find_subnode(dev_ofnode(dev), "fixed-link");
|
|
if (ofnode_valid(subnode)) {
|
|
priv->force_mode = 1;
|
|
priv->speed = ofnode_read_u32_default(subnode, "speed", 0);
|
|
priv->duplex = ofnode_read_bool(subnode, "full-duplex");
|
|
|
|
if (priv->speed != SPEED_10 && priv->speed != SPEED_100 &&
|
|
priv->speed != SPEED_1000) {
|
|
printf("error: no valid speed set in fixed-link\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII) {
|
|
/* get corresponding sgmii phandle */
|
|
ret = dev_read_phandle_with_args(dev, "mediatek,sgmiisys",
|
|
NULL, 0, 0, &args);
|
|
if (ret)
|
|
return ret;
|
|
|
|
regmap = syscon_node_to_regmap(args.node);
|
|
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
priv->sgmii_base = regmap_get_range(regmap, 0);
|
|
|
|
if (!priv->sgmii_base) {
|
|
dev_err(dev, "Unable to find sgmii\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
/* check for switch first, otherwise phy will be used */
|
|
priv->sw = SW_NONE;
|
|
priv->switch_init = NULL;
|
|
str = dev_read_string(dev, "mediatek,switch");
|
|
|
|
if (str) {
|
|
if (!strcmp(str, "mt7530")) {
|
|
priv->sw = SW_MT7530;
|
|
priv->switch_init = mt7530_setup;
|
|
priv->mt753x_smi_addr = MT753X_DFL_SMI_ADDR;
|
|
} else if (!strcmp(str, "mt7531")) {
|
|
priv->sw = SW_MT7531;
|
|
priv->switch_init = mt7531_setup;
|
|
priv->mt753x_smi_addr = MT753X_DFL_SMI_ADDR;
|
|
} else {
|
|
printf("error: unsupported switch\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->mcm = dev_read_bool(dev, "mediatek,mcm");
|
|
if (priv->mcm) {
|
|
ret = reset_get_by_name(dev, "mcm", &priv->rst_mcm);
|
|
if (ret) {
|
|
printf("error: no reset ctrl for mcm\n");
|
|
return ret;
|
|
}
|
|
} else {
|
|
gpio_request_by_name(dev, "reset-gpios", 0,
|
|
&priv->rst_gpio, GPIOD_IS_OUT);
|
|
}
|
|
} else {
|
|
ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0,
|
|
0, &args);
|
|
if (ret) {
|
|
printf("error: phy-handle is not specified\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->phy_addr = ofnode_read_s32_default(args.node, "reg", -1);
|
|
if (priv->phy_addr < 0) {
|
|
printf("error: phy address is not specified\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id mtk_eth_ids[] = {
|
|
{ .compatible = "mediatek,mt7629-eth", .data = SOC_MT7629 },
|
|
{ .compatible = "mediatek,mt7623-eth", .data = SOC_MT7623 },
|
|
{ .compatible = "mediatek,mt7622-eth", .data = SOC_MT7622 },
|
|
{}
|
|
};
|
|
|
|
static const struct eth_ops mtk_eth_ops = {
|
|
.start = mtk_eth_start,
|
|
.stop = mtk_eth_stop,
|
|
.send = mtk_eth_send,
|
|
.recv = mtk_eth_recv,
|
|
.free_pkt = mtk_eth_free_pkt,
|
|
.write_hwaddr = mtk_eth_write_hwaddr,
|
|
};
|
|
|
|
U_BOOT_DRIVER(mtk_eth) = {
|
|
.name = "mtk-eth",
|
|
.id = UCLASS_ETH,
|
|
.of_match = mtk_eth_ids,
|
|
.ofdata_to_platdata = mtk_eth_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
.probe = mtk_eth_probe,
|
|
.remove = mtk_eth_remove,
|
|
.ops = &mtk_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct mtk_eth_priv),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|