u-boot/include/configs/colibri-imx8x.h
Tom Rini cf493582f8 Convert CONFIG_SYS_MAXARGS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MAXARGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:08:58 -04:00

120 lines
3.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2019 Toradex
*/
#ifndef __COLIBRI_IMX8X_H
#define __COLIBRI_IMX8X_H
#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
#include <linux/stringify.h>
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define USDHC1_BASE_ADDR 0x5b010000
#define USDHC2_BASE_ADDR 0x5b020000
#define CONFIG_IPADDR 192.168.10.2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
#define MEM_LAYOUT_ENV_SETTINGS \
"fdt_addr_r=0x83000000\0" \
"kernel_addr_r=0x81000000\0" \
"ramdisk_addr_r=0x83800000\0" \
"scriptaddr=0x80800000\0"
#ifdef CONFIG_AHAB_BOOT
#define AHAB_ENV "sec_boot=yes\0"
#else
#define AHAB_ENV "sec_boot=no\0"
#endif
/* Boot M4 */
#define M4_BOOT_ENV \
"m4_0_image=m4_0.bin\0" \
"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${m4_0_image}\0" \
"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
#define MFG_NAND_PARTITION ""
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#undef BOOTENV_RUN_NET_USB_START
#define BOOTENV_RUN_NET_USB_START ""
#define CONFIG_MFG_ENV_SETTINGS \
"mfgtool_args=setenv bootargs ${consoleargs} " \
"rdinit=/linuxrc g_mass_storage.stall=0 " \
"g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
"g_mass_storage.idProduct=0x37FF " \
"g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
"${vidargs} clk_ignore_unused\0" \
"initrd_addr=0x83800000\0" \
"initrd_high=0xffffffff\0" \
"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
"${fdt_addr};\0" \
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
AHAB_ENV \
BOOTENV \
CONFIG_MFG_ENV_SETTINGS \
M4_BOOT_ENV \
MEM_LAYOUT_ENV_SETTINGS \
"boot_file=Image\0" \
"boot_script_dhcp=boot.scr\0" \
"consoleargs=console=ttyLP3,${baudrate} earlycon\0" \
"fdt_addr=0x83000000\0" \
"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
"fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
"image=Image\0" \
"initrd_addr=0x83800000\0" \
"initrd_high=0xffffffffffffffff\0" \
"mmcargs=setenv bootargs ${consoleargs} " \
"root=PARTUUID=${uuid} rootwait " \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=1\0" \
"panel=NULL\0" \
"script=boot.scr\0" \
"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
"if test \"$confirm\" = \"y\"; then " \
"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
"${blkcnt}; fi\0" \
"vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
/* Link Definitions */
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
/* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define PHYS_SDRAM_1 0x80000000
#define PHYS_SDRAM_2 0x880000000
#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
/* Generic Timer Definitions */
#define BOOTAUX_RESERVED_MEM_BASE 0x88000000
#define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */
#endif /* __COLIBRI_IMX8X_H */