mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 12:33:41 +00:00
1f8b546f9e
Typoes fixed: "partion" -> "partition" "retrive", "retreive" -> "retrieve" "th" -> "to" Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
852 lines
28 KiB
C
852 lines
28 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Denis Peter, MPL AG Switzerland, d.peter@mpl.ch.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
* partly derived from
|
|
* linux/drivers/scsi/sym53c8xx.c
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* SCSI support based on the chip sym53C810.
|
|
*
|
|
* 09-19-2001 Andreas Heppel, Sysgo RTS GmbH <aheppel@sysgo.de>
|
|
* The local version of this driver for the BAB750 board does not
|
|
* use interrupts but polls the chip instead (see the call of
|
|
* 'handle_scsi_int()' in 'scsi_issue()'.
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <sym53c8xx.h>
|
|
#include <scsi.h>
|
|
|
|
#undef SYM53C8XX_DEBUG
|
|
|
|
#ifdef SYM53C8XX_DEBUG
|
|
#define PRINTF(fmt,args...) printf (fmt ,##args)
|
|
#else
|
|
#define PRINTF(fmt,args...)
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX)
|
|
|
|
#undef SCSI_SINGLE_STEP
|
|
/*
|
|
* Single Step is only used for debug purposes
|
|
*/
|
|
#ifdef SCSI_SINGLE_STEP
|
|
static unsigned long start_script_select;
|
|
static unsigned long start_script_msgout;
|
|
static unsigned long start_script_msgin;
|
|
static unsigned long start_script_msg_ext;
|
|
static unsigned long start_script_cmd;
|
|
static unsigned long start_script_data_in;
|
|
static unsigned long start_script_data_out;
|
|
static unsigned long start_script_status;
|
|
static unsigned long start_script_complete;
|
|
static unsigned long start_script_error;
|
|
static unsigned long start_script_reselection;
|
|
static unsigned int len_script_select;
|
|
static unsigned int len_script_msgout;
|
|
static unsigned int len_script_msgin;
|
|
static unsigned int len_script_msg_ext;
|
|
static unsigned int len_script_cmd;
|
|
static unsigned int len_script_data_in;
|
|
static unsigned int len_script_data_out;
|
|
static unsigned int len_script_status;
|
|
static unsigned int len_script_complete;
|
|
static unsigned int len_script_error;
|
|
static unsigned int len_script_reselection;
|
|
#endif
|
|
|
|
|
|
static unsigned short scsi_int_mask; /* shadow register for SCSI related interrupts */
|
|
static unsigned char script_int_mask; /* shadow register for SCRIPT related interrupts */
|
|
static unsigned long script_select[8]; /* script for selection */
|
|
static unsigned long script_msgout[8]; /* script for message out phase (NOT USED) */
|
|
static unsigned long script_msgin[14]; /* script for message in phase */
|
|
static unsigned long script_msg_ext[32]; /* script for message in phase when more than 1 byte message */
|
|
static unsigned long script_cmd[18]; /* script for command phase */
|
|
static unsigned long script_data_in[8]; /* script for data in phase */
|
|
static unsigned long script_data_out[8]; /* script for data out phase */
|
|
static unsigned long script_status[6]; /* script for status phase */
|
|
static unsigned long script_complete[10]; /* script for complete */
|
|
static unsigned long script_reselection[4]; /* script for reselection (NOT USED) */
|
|
static unsigned long script_error[2]; /* script for error handling */
|
|
|
|
static unsigned long int_stat[3]; /* interrupt status */
|
|
static unsigned long scsi_mem_addr; /* base memory address =SCSI_MEM_ADDRESS; */
|
|
|
|
#define bus_to_phys(a) pci_mem_to_phys(busdevfunc, (unsigned long) (a))
|
|
#define phys_to_bus(a) pci_phys_to_mem(busdevfunc, (unsigned long) (a))
|
|
|
|
#define SCSI_MAX_RETRY 3 /* number of retries in scsi_issue() */
|
|
|
|
#define SCSI_MAX_RETRY_NOT_READY 10 /* number of retries when device is not ready */
|
|
#define SCSI_NOT_READY_TIME_OUT 500 /* timeout per retry when not ready */
|
|
|
|
/*********************************************************************************
|
|
* forward declerations
|
|
*/
|
|
|
|
void scsi_chip_init(void);
|
|
void handle_scsi_int(void);
|
|
|
|
|
|
/********************************************************************************
|
|
* reports SCSI errors to the user
|
|
*/
|
|
void scsi_print_error (ccb * pccb)
|
|
{
|
|
int i;
|
|
|
|
printf ("SCSI Error: Target %d LUN %d Command %02X\n", pccb->target,
|
|
pccb->lun, pccb->cmd[0]);
|
|
printf (" CCB: ");
|
|
for (i = 0; i < pccb->cmdlen; i++)
|
|
printf ("%02X ", pccb->cmd[i]);
|
|
printf ("(len=%d)\n", pccb->cmdlen);
|
|
printf (" Cntrl: ");
|
|
switch (pccb->contr_stat) {
|
|
case SIR_COMPLETE:
|
|
printf ("Complete (no Error)\n");
|
|
break;
|
|
case SIR_SEL_ATN_NO_MSG_OUT:
|
|
printf ("Selected with ATN no MSG out phase\n");
|
|
break;
|
|
case SIR_CMD_OUT_ILL_PH:
|
|
printf ("Command out illegal phase\n");
|
|
break;
|
|
case SIR_MSG_RECEIVED:
|
|
printf ("MSG received Error\n");
|
|
break;
|
|
case SIR_DATA_IN_ERR:
|
|
printf ("Data in Error\n");
|
|
break;
|
|
case SIR_DATA_OUT_ERR:
|
|
printf ("Data out Error\n");
|
|
break;
|
|
case SIR_SCRIPT_ERROR:
|
|
printf ("Script Error\n");
|
|
break;
|
|
case SIR_MSG_OUT_NO_CMD:
|
|
printf ("MSG out no Command phase\n");
|
|
break;
|
|
case SIR_MSG_OVER7:
|
|
printf ("MSG in over 7 bytes\n");
|
|
break;
|
|
case INT_ON_FY:
|
|
printf ("Interrupt on fly\n");
|
|
break;
|
|
case SCSI_SEL_TIME_OUT:
|
|
printf ("SCSI Selection Timeout\n");
|
|
break;
|
|
case SCSI_HNS_TIME_OUT:
|
|
printf ("SCSI Handshake Timeout\n");
|
|
break;
|
|
case SCSI_MA_TIME_OUT:
|
|
printf ("SCSI Phase Error\n");
|
|
break;
|
|
case SCSI_UNEXP_DIS:
|
|
printf ("SCSI unexpected disconnect\n");
|
|
break;
|
|
default:
|
|
printf ("unknown status %lx\n", pccb->contr_stat);
|
|
break;
|
|
}
|
|
printf (" Sense: SK %x (", pccb->sense_buf[2] & 0x0f);
|
|
switch (pccb->sense_buf[2] & 0xf) {
|
|
case SENSE_NO_SENSE:
|
|
printf ("No Sense)");
|
|
break;
|
|
case SENSE_RECOVERED_ERROR:
|
|
printf ("Recovered Error)");
|
|
break;
|
|
case SENSE_NOT_READY:
|
|
printf ("Not Ready)");
|
|
break;
|
|
case SENSE_MEDIUM_ERROR:
|
|
printf ("Medium Error)");
|
|
break;
|
|
case SENSE_HARDWARE_ERROR:
|
|
printf ("Hardware Error)");
|
|
break;
|
|
case SENSE_ILLEGAL_REQUEST:
|
|
printf ("Illegal request)");
|
|
break;
|
|
case SENSE_UNIT_ATTENTION:
|
|
printf ("Unit Attention)");
|
|
break;
|
|
case SENSE_DATA_PROTECT:
|
|
printf ("Data Protect)");
|
|
break;
|
|
case SENSE_BLANK_CHECK:
|
|
printf ("Blank check)");
|
|
break;
|
|
case SENSE_VENDOR_SPECIFIC:
|
|
printf ("Vendor specific)");
|
|
break;
|
|
case SENSE_COPY_ABORTED:
|
|
printf ("Copy aborted)");
|
|
break;
|
|
case SENSE_ABORTED_COMMAND:
|
|
printf ("Aborted Command)");
|
|
break;
|
|
case SENSE_VOLUME_OVERFLOW:
|
|
printf ("Volume overflow)");
|
|
break;
|
|
case SENSE_MISCOMPARE:
|
|
printf ("Misscompare\n");
|
|
break;
|
|
default:
|
|
printf ("Illegal Sensecode\n");
|
|
break;
|
|
}
|
|
printf (" ASC %x ASCQ %x\n", pccb->sense_buf[12],
|
|
pccb->sense_buf[13]);
|
|
printf (" Status: ");
|
|
switch (pccb->status) {
|
|
case S_GOOD:
|
|
printf ("Good\n");
|
|
break;
|
|
case S_CHECK_COND:
|
|
printf ("Check condition\n");
|
|
break;
|
|
case S_COND_MET:
|
|
printf ("Condition Met\n");
|
|
break;
|
|
case S_BUSY:
|
|
printf ("Busy\n");
|
|
break;
|
|
case S_INT:
|
|
printf ("Intermediate\n");
|
|
break;
|
|
case S_INT_COND_MET:
|
|
printf ("Intermediate condition met\n");
|
|
break;
|
|
case S_CONFLICT:
|
|
printf ("Reservation conflict\n");
|
|
break;
|
|
case S_TERMINATED:
|
|
printf ("Command terminated\n");
|
|
break;
|
|
case S_QUEUE_FULL:
|
|
printf ("Task set full\n");
|
|
break;
|
|
default:
|
|
printf ("unknown: %02X\n", pccb->status);
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* sets-up the SCSI controller
|
|
* the base memory address is retrieved via the pci_read_config_dword
|
|
*/
|
|
void scsi_low_level_init(int busdevfunc)
|
|
{
|
|
unsigned int cmd;
|
|
unsigned int addr;
|
|
unsigned char vec;
|
|
|
|
pci_read_config_byte(busdevfunc, PCI_INTERRUPT_LINE, &vec);
|
|
pci_read_config_dword(busdevfunc, PCI_BASE_ADDRESS_1, &addr);
|
|
|
|
addr = bus_to_phys(addr & ~0xf);
|
|
|
|
/*
|
|
* Enable bus mastering in case this has not been done, yet.
|
|
*/
|
|
pci_read_config_dword(busdevfunc, PCI_COMMAND, &cmd);
|
|
cmd |= PCI_COMMAND_MASTER;
|
|
pci_write_config_dword(busdevfunc, PCI_COMMAND, cmd);
|
|
|
|
scsi_mem_addr = addr;
|
|
|
|
scsi_chip_init();
|
|
scsi_bus_reset();
|
|
}
|
|
|
|
|
|
/************************************************************************************
|
|
* Low level Part of SCSI Driver
|
|
*/
|
|
|
|
/*
|
|
* big-endian -> little endian conversion for the script
|
|
*/
|
|
unsigned long swap_script(unsigned long val)
|
|
{
|
|
unsigned long tmp;
|
|
tmp = ((val>>24)&0xff) | ((val>>8)&0xff00) | ((val<<8)&0xff0000) | ((val<<24)&0xff000000);
|
|
return tmp;
|
|
}
|
|
|
|
|
|
void scsi_write_byte(ulong offset,unsigned char val)
|
|
{
|
|
out8(scsi_mem_addr+offset,val);
|
|
}
|
|
|
|
|
|
unsigned char scsi_read_byte(ulong offset)
|
|
{
|
|
return(in8(scsi_mem_addr+offset));
|
|
}
|
|
|
|
|
|
/********************************************************************************
|
|
* interrupt handler
|
|
*/
|
|
void handle_scsi_int(void)
|
|
{
|
|
unsigned char stat,stat1,stat2;
|
|
unsigned short sstat;
|
|
int i;
|
|
#ifdef SCSI_SINGLE_STEP
|
|
unsigned long tt;
|
|
#endif
|
|
stat=scsi_read_byte(ISTAT);
|
|
if((stat & DIP)==DIP) { /* DMA Interrupt pending */
|
|
stat1=scsi_read_byte(DSTAT);
|
|
#ifdef SCSI_SINGLE_STEP
|
|
if((stat1 & SSI)==SSI) {
|
|
tt=in32r(scsi_mem_addr+DSP);
|
|
if(((tt)>=start_script_select) && ((tt)<start_script_select+len_script_select)) {
|
|
printf("select %d\n",(tt-start_script_select)>>2);
|
|
goto end_single;
|
|
}
|
|
if(((tt)>=start_script_msgout) && ((tt)<start_script_msgout+len_script_msgout)) {
|
|
printf("msgout %d\n",(tt-start_script_msgout)>>2);
|
|
goto end_single;
|
|
}
|
|
if(((tt)>=start_script_msgin) && ((tt)<start_script_msgin+len_script_msgin)) {
|
|
printf("msgin %d\n",(tt-start_script_msgin)>>2);
|
|
goto end_single;
|
|
}
|
|
if(((tt)>=start_script_msg_ext) && ((tt)<start_script_msg_ext+len_script_msg_ext)) {
|
|
printf("msgin_ext %d\n",(tt-start_script_msg_ext)>>2);
|
|
goto end_single;
|
|
}
|
|
if(((tt)>=start_script_cmd) && ((tt)<start_script_cmd+len_script_cmd)) {
|
|
printf("cmd %d\n",(tt-start_script_cmd)>>2);
|
|
goto end_single;
|
|
}
|
|
if(((tt)>=start_script_data_in) && ((tt)<start_script_data_in+len_script_data_in)) {
|
|
printf("data_in %d\n",(tt-start_script_data_in)>>2);
|
|
goto end_single;
|
|
}
|
|
if(((tt)>=start_script_data_out) && ((tt)<start_script_data_out+len_script_data_out)) {
|
|
printf("data_out %d\n",(tt-start_script_data_out)>>2);
|
|
goto end_single;
|
|
}
|
|
if(((tt)>=start_script_status) && ((tt)<start_script_status+len_script_status)) {
|
|
printf("status %d\n",(tt-start_script_status)>>2);
|
|
goto end_single;
|
|
}
|
|
if(((tt)>=start_script_complete) && ((tt)<start_script_complete+len_script_complete)) {
|
|
printf("complete %d\n",(tt-start_script_complete)>>2);
|
|
goto end_single;
|
|
}
|
|
if(((tt)>=start_script_error) && ((tt)<start_script_error+len_script_error)) {
|
|
printf("error %d\n",(tt-start_script_error)>>2);
|
|
goto end_single;
|
|
}
|
|
if(((tt)>=start_script_reselection) && ((tt)<start_script_reselection+len_script_reselection)) {
|
|
printf("reselection %d\n",(tt-start_script_reselection)>>2);
|
|
goto end_single;
|
|
}
|
|
printf("sc: %lx\n",tt);
|
|
end_single:
|
|
stat2=scsi_read_byte(DCNTL);
|
|
stat2|=STD;
|
|
scsi_write_byte(DCNTL,stat2);
|
|
}
|
|
#endif
|
|
if((stat1 & SIR)==SIR) /* script interrupt */
|
|
{
|
|
int_stat[0]=in32(scsi_mem_addr+DSPS);
|
|
}
|
|
if((stat1 & DFE)==0) { /* fifo not epmty */
|
|
scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */
|
|
stat2=scsi_read_byte(STEST3);
|
|
scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */
|
|
}
|
|
}
|
|
if((stat & SIP)==SIP) { /* scsi interrupt */
|
|
sstat = (unsigned short)scsi_read_byte(SIST+1);
|
|
sstat <<=8;
|
|
sstat |= (unsigned short)scsi_read_byte(SIST);
|
|
for(i=0;i<3;i++) {
|
|
if(int_stat[i]==0)
|
|
break; /* found an empty int status */
|
|
}
|
|
int_stat[i]=SCSI_INT_STATE | sstat;
|
|
stat1=scsi_read_byte(DSTAT);
|
|
if((stat1 & DFE)==0) { /* fifo not epmty */
|
|
scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */
|
|
stat2=scsi_read_byte(STEST3);
|
|
scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */
|
|
}
|
|
}
|
|
if((stat & INTF)==INTF) { /* interrupt on Fly */
|
|
scsi_write_byte(ISTAT,stat); /* clear it */
|
|
for(i=0;i<3;i++) {
|
|
if(int_stat[i]==0)
|
|
break; /* found an empty int status */
|
|
}
|
|
int_stat[i]=INT_ON_FY;
|
|
}
|
|
}
|
|
|
|
void scsi_bus_reset(void)
|
|
{
|
|
unsigned char t;
|
|
int i;
|
|
int end = CONFIG_SYS_SCSI_SPIN_UP_TIME*1000;
|
|
|
|
t=scsi_read_byte(SCNTL1);
|
|
scsi_write_byte(SCNTL1,(t | CRST));
|
|
udelay(50);
|
|
scsi_write_byte(SCNTL1,t);
|
|
|
|
puts("waiting for devices to spin up");
|
|
for(i=0;i<end;i++) {
|
|
udelay(1000); /* give the devices time to spin up */
|
|
if (i % 1000 == 0)
|
|
putc('.');
|
|
}
|
|
putc('\n');
|
|
scsi_chip_init(); /* reinit the chip ...*/
|
|
|
|
}
|
|
|
|
void scsi_int_enable(void)
|
|
{
|
|
scsi_write_byte(SIEN,(unsigned char)scsi_int_mask);
|
|
scsi_write_byte(SIEN+1,(unsigned char)(scsi_int_mask>>8));
|
|
scsi_write_byte(DIEN,script_int_mask);
|
|
}
|
|
|
|
void scsi_write_dsp(unsigned long start)
|
|
{
|
|
#ifdef SCSI_SINGLE_STEP
|
|
unsigned char t;
|
|
#endif
|
|
out32r(scsi_mem_addr + DSP,start);
|
|
#ifdef SCSI_SINGLE_STEP
|
|
t=scsi_read_byte(DCNTL);
|
|
t|=STD;
|
|
scsi_write_byte(DCNTL,t);
|
|
#endif
|
|
}
|
|
|
|
/* only used for debug purposes */
|
|
void scsi_print_script(void)
|
|
{
|
|
printf("script_select @ 0x%08lX\n",(unsigned long)&script_select[0]);
|
|
printf("script_msgout @ 0x%08lX\n",(unsigned long)&script_msgout[0]);
|
|
printf("script_msgin @ 0x%08lX\n",(unsigned long)&script_msgin[0]);
|
|
printf("script_msgext @ 0x%08lX\n",(unsigned long)&script_msg_ext[0]);
|
|
printf("script_cmd @ 0x%08lX\n",(unsigned long)&script_cmd[0]);
|
|
printf("script_data_in @ 0x%08lX\n",(unsigned long)&script_data_in[0]);
|
|
printf("script_data_out @ 0x%08lX\n",(unsigned long)&script_data_out[0]);
|
|
printf("script_status @ 0x%08lX\n",(unsigned long)&script_status[0]);
|
|
printf("script_complete @ 0x%08lX\n",(unsigned long)&script_complete[0]);
|
|
printf("script_error @ 0x%08lX\n",(unsigned long)&script_error[0]);
|
|
}
|
|
|
|
|
|
void scsi_set_script(ccb *pccb)
|
|
{
|
|
int busdevfunc = pccb->priv;
|
|
int i;
|
|
i=0;
|
|
script_select[i++]=swap_script(SCR_REG_REG(GPREG, SCR_AND, 0xfe));
|
|
script_select[i++]=0; /* LED ON */
|
|
script_select[i++]=swap_script(SCR_CLR(SCR_TRG)); /* select initiator mode */
|
|
script_select[i++]=0;
|
|
/* script_select[i++]=swap_script(SCR_SEL_ABS_ATN | pccb->target << 16); */
|
|
script_select[i++]=swap_script(SCR_SEL_ABS | pccb->target << 16);
|
|
script_select[i++]=swap_script(phys_to_bus(&script_cmd[4])); /* error handling */
|
|
script_select[i++]=swap_script(SCR_JUMP); /* next section */
|
|
/* script_select[i++]=swap_script((unsigned long)&script_msgout[0]); */ /* message out */
|
|
script_select[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* command out */
|
|
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_select=(unsigned long)&script_select[0];
|
|
len_script_select=i*4;
|
|
#endif
|
|
|
|
i=0;
|
|
script_msgout[i++]=swap_script(SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)));
|
|
script_msgout[i++]=SIR_SEL_ATN_NO_MSG_OUT;
|
|
script_msgout[i++]=swap_script( SCR_MOVE_ABS(1) ^ SCR_MSG_OUT);
|
|
script_msgout[i++]=swap_script(phys_to_bus(&pccb->msgout[0]));
|
|
script_msgout[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_COMMAND))); /* if Command phase */
|
|
script_msgout[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* switch to command */
|
|
script_msgout[i++]=swap_script(SCR_INT); /* interrupt if not */
|
|
script_msgout[i++]=SIR_MSG_OUT_NO_CMD;
|
|
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_msgout=(unsigned long)&script_msgout[0];
|
|
len_script_msgout=i*4;
|
|
#endif
|
|
i=0;
|
|
script_cmd[i++]=swap_script(SCR_MOVE_ABS(pccb->cmdlen) ^ SCR_COMMAND);
|
|
script_cmd[i++]=swap_script(phys_to_bus(&pccb->cmd[0]));
|
|
script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); /* message in ? */
|
|
script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0]));
|
|
script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT))); /* data out ? */
|
|
script_cmd[i++]=swap_script(phys_to_bus(&script_data_out[0]));
|
|
script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN))); /* data in ? */
|
|
script_cmd[i++]=swap_script(phys_to_bus(&script_data_in[0]));
|
|
script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_STATUS))); /* status ? */
|
|
script_cmd[i++]=swap_script(phys_to_bus(&script_status[0]));
|
|
script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND))); /* command ? */
|
|
script_cmd[i++]=swap_script(phys_to_bus(&script_cmd[0]));
|
|
script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT))); /* message out ? */
|
|
script_cmd[i++]=swap_script(phys_to_bus(&script_msgout[0]));
|
|
script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN))); /* just for error handling message in ? */
|
|
script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0]));
|
|
script_cmd[i++]=swap_script(SCR_INT); /* interrupt if not */
|
|
script_cmd[i++]=SIR_CMD_OUT_ILL_PH;
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_cmd=(unsigned long)&script_cmd[0];
|
|
len_script_cmd=i*4;
|
|
#endif
|
|
i=0;
|
|
script_data_out[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_OUT); /* move */
|
|
script_data_out[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */
|
|
script_data_out[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)));
|
|
script_data_out[i++]=swap_script(phys_to_bus(&script_status[0]));
|
|
script_data_out[i++]=swap_script(SCR_INT);
|
|
script_data_out[i++]=SIR_DATA_OUT_ERR;
|
|
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_data_out=(unsigned long)&script_data_out[0];
|
|
len_script_data_out=i*4;
|
|
#endif
|
|
i=0;
|
|
script_data_in[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_IN); /* move */
|
|
script_data_in[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */
|
|
script_data_in[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)));
|
|
script_data_in[i++]=swap_script(phys_to_bus(&script_status[0]));
|
|
script_data_in[i++]=swap_script(SCR_INT);
|
|
script_data_in[i++]=SIR_DATA_IN_ERR;
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_data_in=(unsigned long)&script_data_in[0];
|
|
len_script_data_in=i*4;
|
|
#endif
|
|
i=0;
|
|
script_msgin[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN);
|
|
script_msgin[i++]=swap_script(phys_to_bus(&pccb->msgin[0]));
|
|
script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE)));
|
|
script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
|
|
script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT)));
|
|
script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
|
|
script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP)));
|
|
script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
|
|
script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP)));
|
|
script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
|
|
script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED)));
|
|
script_msgin[i++]=swap_script(phys_to_bus(&script_msg_ext[0]));
|
|
script_msgin[i++]=swap_script(SCR_INT);
|
|
script_msgin[i++]=SIR_MSG_RECEIVED;
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_msgin=(unsigned long)&script_msgin[0];
|
|
len_script_msgin=i*4;
|
|
#endif
|
|
i=0;
|
|
script_msg_ext[i++]=swap_script(SCR_CLR (SCR_ACK)); /* clear ACK */
|
|
script_msg_ext[i++]=0;
|
|
script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* assuming this is the msg length */
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[1]));
|
|
script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
|
|
script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[2]));
|
|
script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
|
|
script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[3]));
|
|
script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
|
|
script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[4]));
|
|
script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
|
|
script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[5]));
|
|
script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
|
|
script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[6]));
|
|
script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
|
|
script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[7]));
|
|
script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
|
|
script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
|
|
script_msg_ext[i++]=swap_script(SCR_INT);
|
|
script_msg_ext[i++]=SIR_MSG_OVER7;
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_msg_ext=(unsigned long)&script_msg_ext[0];
|
|
len_script_msg_ext=i*4;
|
|
#endif
|
|
i=0;
|
|
script_status[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_STATUS);
|
|
script_status[i++]=swap_script(phys_to_bus(&pccb->status));
|
|
script_status[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)));
|
|
script_status[i++]=swap_script(phys_to_bus(&script_msgin[0]));
|
|
script_status[i++]=swap_script(SCR_INT);
|
|
script_status[i++]=SIR_STATUS_ILL_PH;
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_status=(unsigned long)&script_status[0];
|
|
len_script_status=i*4;
|
|
#endif
|
|
i=0;
|
|
script_complete[i++]=swap_script(SCR_REG_REG (SCNTL2, SCR_AND, 0x7f));
|
|
script_complete[i++]=0;
|
|
script_complete[i++]=swap_script(SCR_CLR (SCR_ACK|SCR_ATN));
|
|
script_complete[i++]=0;
|
|
script_complete[i++]=swap_script(SCR_WAIT_DISC);
|
|
script_complete[i++]=0;
|
|
script_complete[i++]=swap_script(SCR_REG_REG(GPREG, SCR_OR, 0x01));
|
|
script_complete[i++]=0; /* LED OFF */
|
|
script_complete[i++]=swap_script(SCR_INT);
|
|
script_complete[i++]=SIR_COMPLETE;
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_complete=(unsigned long)&script_complete[0];
|
|
len_script_complete=i*4;
|
|
#endif
|
|
i=0;
|
|
script_error[i++]=swap_script(SCR_INT); /* interrupt if error */
|
|
script_error[i++]=SIR_SCRIPT_ERROR;
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_error=(unsigned long)&script_error[0];
|
|
len_script_error=i*4;
|
|
#endif
|
|
i=0;
|
|
script_reselection[i++]=swap_script(SCR_CLR (SCR_TRG)); /* target status */
|
|
script_reselection[i++]=0;
|
|
script_reselection[i++]=swap_script(SCR_WAIT_RESEL);
|
|
script_reselection[i++]=swap_script(phys_to_bus(&script_select[0])); /* len = 4 */
|
|
#ifdef SCSI_SINGLE_STEP
|
|
start_script_reselection=(unsigned long)&script_reselection[0];
|
|
len_script_reselection=i*4;
|
|
#endif
|
|
}
|
|
|
|
|
|
void scsi_issue(ccb *pccb)
|
|
{
|
|
int busdevfunc = pccb->priv;
|
|
int i;
|
|
unsigned short sstat;
|
|
int retrycnt; /* retry counter */
|
|
for(i=0;i<3;i++)
|
|
int_stat[i]=0; /* delete all int status */
|
|
/* struct pccb must be set-up correctly */
|
|
retrycnt=0;
|
|
PRINTF("ID %d issue cmd %02X\n",pccb->target,pccb->cmd[0]);
|
|
pccb->trans_bytes=0; /* no bytes transfered yet */
|
|
scsi_set_script(pccb); /* fill in SCRIPT */
|
|
scsi_int_mask=STO | UDC | MA; /* | CMP; / * Interrupts which are enabled */
|
|
script_int_mask=0xff; /* enable all Ints */
|
|
scsi_int_enable();
|
|
scsi_write_dsp(phys_to_bus(&script_select[0])); /* start script */
|
|
/* now we have to wait for IRQs */
|
|
retry:
|
|
/*
|
|
* This version of the driver is _not_ interrupt driven,
|
|
* but polls the chip's interrupt registers (ISTAT, DSTAT).
|
|
*/
|
|
while(int_stat[0]==0)
|
|
handle_scsi_int();
|
|
|
|
if(int_stat[0]==SIR_COMPLETE) {
|
|
if(pccb->msgin[0]==M_DISCONNECT) {
|
|
PRINTF("Wait for reselection\n");
|
|
for(i=0;i<3;i++)
|
|
int_stat[i]=0; /* delete all int status */
|
|
scsi_write_dsp(phys_to_bus(&script_reselection[0])); /* start reselection script */
|
|
goto retry;
|
|
}
|
|
pccb->contr_stat=SIR_COMPLETE;
|
|
return;
|
|
}
|
|
if((int_stat[0] & SCSI_INT_STATE)==SCSI_INT_STATE) { /* scsi interrupt */
|
|
sstat=(unsigned short)int_stat[0];
|
|
if((sstat & STO)==STO) { /* selection timeout */
|
|
pccb->contr_stat=SCSI_SEL_TIME_OUT;
|
|
scsi_write_byte(GPREG,0x01);
|
|
PRINTF("ID: %X Selection Timeout\n",pccb->target);
|
|
return;
|
|
}
|
|
if((sstat & UDC)==UDC) { /* unexpected disconnect */
|
|
pccb->contr_stat=SCSI_UNEXP_DIS;
|
|
scsi_write_byte(GPREG,0x01);
|
|
PRINTF("ID: %X Unexpected Disconnect\n",pccb->target);
|
|
return;
|
|
}
|
|
if((sstat & RSL)==RSL) { /* reselection */
|
|
pccb->contr_stat=SCSI_UNEXP_DIS;
|
|
scsi_write_byte(GPREG,0x01);
|
|
PRINTF("ID: %X Unexpected Disconnect\n",pccb->target);
|
|
return;
|
|
}
|
|
if(((sstat & MA)==MA)||((sstat & HTH)==HTH)) { /* phase missmatch */
|
|
if(retrycnt<SCSI_MAX_RETRY) {
|
|
pccb->trans_bytes=pccb->datalen -
|
|
((unsigned long)scsi_read_byte(DBC) |
|
|
((unsigned long)scsi_read_byte(DBC+1)<<8) |
|
|
((unsigned long)scsi_read_byte(DBC+2)<<16));
|
|
for(i=0;i<3;i++)
|
|
int_stat[i]=0; /* delete all int status */
|
|
retrycnt++;
|
|
PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transfered %lx\n",
|
|
pccb->target,retrycnt,scsi_read_byte(SBCL),pccb->trans_bytes);
|
|
scsi_write_dsp(phys_to_bus(&script_cmd[4])); /* start retry script */
|
|
goto retry;
|
|
}
|
|
if((sstat & MA)==MA)
|
|
pccb->contr_stat=SCSI_MA_TIME_OUT;
|
|
else
|
|
pccb->contr_stat=SCSI_HNS_TIME_OUT;
|
|
PRINTF("Phase Missmatch stat %lx\n",pccb->contr_stat);
|
|
return;
|
|
} /* no phase int */
|
|
/* if((sstat & CMP)==CMP) {
|
|
pccb->contr_stat=SIR_COMPLETE;
|
|
return;
|
|
}
|
|
*/
|
|
PRINTF("SCSI INT %lX\n",int_stat[0]);
|
|
pccb->contr_stat=int_stat[0];
|
|
return;
|
|
} /* end scsi int */
|
|
PRINTF("SCRIPT INT %lX phase %02X\n",int_stat[0],scsi_read_byte(SBCL));
|
|
pccb->contr_stat=int_stat[0];
|
|
return;
|
|
}
|
|
|
|
int scsi_exec(ccb *pccb)
|
|
{
|
|
unsigned char tmpcmd[16],tmpstat;
|
|
int i,retrycnt,t;
|
|
unsigned long transbytes,datalen;
|
|
unsigned char *tmpptr;
|
|
retrycnt=0;
|
|
retry:
|
|
scsi_issue(pccb);
|
|
if(pccb->contr_stat!=SIR_COMPLETE)
|
|
return false;
|
|
if(pccb->status==S_GOOD)
|
|
return true;
|
|
if(pccb->status==S_CHECK_COND) { /* check condition */
|
|
for(i=0;i<16;i++)
|
|
tmpcmd[i]=pccb->cmd[i];
|
|
pccb->cmd[0]=SCSI_REQ_SENSE;
|
|
pccb->cmd[1]=pccb->lun<<5;
|
|
pccb->cmd[2]=0;
|
|
pccb->cmd[3]=0;
|
|
pccb->cmd[4]=14;
|
|
pccb->cmd[5]=0;
|
|
pccb->cmdlen=6;
|
|
pccb->msgout[0]=SCSI_IDENTIFY;
|
|
transbytes=pccb->trans_bytes;
|
|
tmpptr=pccb->pdata;
|
|
pccb->pdata = &pccb->sense_buf[0];
|
|
datalen=pccb->datalen;
|
|
pccb->datalen=14;
|
|
tmpstat=pccb->status;
|
|
scsi_issue(pccb);
|
|
for(i=0;i<16;i++)
|
|
pccb->cmd[i]=tmpcmd[i];
|
|
pccb->trans_bytes=transbytes;
|
|
pccb->pdata=tmpptr;
|
|
pccb->datalen=datalen;
|
|
pccb->status=tmpstat;
|
|
PRINTF("Request_sense sense key %x ASC %x ASCQ %x\n",pccb->sense_buf[2]&0x0f,
|
|
pccb->sense_buf[12],pccb->sense_buf[13]);
|
|
switch(pccb->sense_buf[2]&0xf) {
|
|
case SENSE_NO_SENSE:
|
|
case SENSE_RECOVERED_ERROR:
|
|
/* seems to be ok */
|
|
return true;
|
|
break;
|
|
case SENSE_NOT_READY:
|
|
if((pccb->sense_buf[12]!=0x04)||(pccb->sense_buf[13]!=0x01)) {
|
|
/* if device is not in process of becoming ready */
|
|
return false;
|
|
break;
|
|
} /* else fall through */
|
|
case SENSE_UNIT_ATTENTION:
|
|
if(retrycnt<SCSI_MAX_RETRY_NOT_READY) {
|
|
PRINTF("Target %d not ready, retry %d\n",pccb->target,retrycnt);
|
|
for(t=0;t<SCSI_NOT_READY_TIME_OUT;t++)
|
|
udelay(1000); /* 1sec wait */
|
|
retrycnt++;
|
|
goto retry;
|
|
}
|
|
PRINTF("Target %d not ready, %d retried\n",pccb->target,retrycnt);
|
|
return false;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
PRINTF("Status = %X\n",pccb->status);
|
|
return false;
|
|
}
|
|
|
|
|
|
void scsi_chip_init(void)
|
|
{
|
|
/* first we issue a soft reset */
|
|
scsi_write_byte(ISTAT,SRST);
|
|
udelay(1000);
|
|
scsi_write_byte(ISTAT,0);
|
|
/* setup chip */
|
|
scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */
|
|
scsi_write_byte(SCNTL1,0x00);
|
|
scsi_write_byte(SCNTL2,0x00);
|
|
#ifndef CONFIG_SYS_SCSI_SYM53C8XX_CCF /* config value for none 40 MHz clocks */
|
|
scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */
|
|
#else
|
|
scsi_write_byte(SCNTL3,CONFIG_SYS_SCSI_SYM53C8XX_CCF); /* config value for none 40 MHz clocks */
|
|
#endif
|
|
scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */
|
|
scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */
|
|
scsi_write_byte(SDID,0x00); /* targed SCSI ID = 0 */
|
|
scsi_int_mask=0x0000; /* no Interrupt is enabled */
|
|
script_int_mask=0x00;
|
|
scsi_int_enable();
|
|
scsi_write_byte(GPREG,0x01); /* GPIO0 is LED (off) */
|
|
scsi_write_byte(GPCNTL,0x0E); /* GPIO0 is Output */
|
|
scsi_write_byte(STIME0,0x08); /* handshake timer disabled, selection timeout 512msec */
|
|
scsi_write_byte(RESPID,0x80); /* repond only to the own ID (reselection) */
|
|
scsi_write_byte(STEST1,0x00); /* not isolated, SCLK is used */
|
|
scsi_write_byte(STEST2,0x00); /* no Lowlevel Mode? */
|
|
scsi_write_byte(STEST3,0x80); /* enable tolerANT */
|
|
scsi_write_byte(CTEST3,0x04); /* clear FIFO */
|
|
scsi_write_byte(CTEST4,0x00);
|
|
scsi_write_byte(CTEST5,0x00);
|
|
#ifdef SCSI_SINGLE_STEP
|
|
/* scsi_write_byte(DCNTL,IRQM | SSM); */
|
|
scsi_write_byte(DCNTL,IRQD | SSM);
|
|
scsi_write_byte(DMODE,MAN);
|
|
#else
|
|
/* scsi_write_byte(DCNTL,IRQM); */
|
|
scsi_write_byte(DCNTL,IRQD);
|
|
scsi_write_byte(DMODE,0x00);
|
|
#endif
|
|
}
|
|
#endif
|