mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 04:53:42 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
394 lines
9.3 KiB
C
394 lines
9.3 KiB
C
/*
|
|
* (C) Copyright 2001-2004
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include "ar405.h"
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <command.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern void lxt971_no_sleep(void);
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#if 0
|
|
#define FPGA_DEBUG
|
|
#endif
|
|
|
|
/* fpga configuration data - generated by bin2cc */
|
|
const unsigned char fpgadata[] = {
|
|
#include "fpgadata.c"
|
|
};
|
|
|
|
const unsigned char fpgadata_xl30[] = {
|
|
#include "fpgadata_xl30.c"
|
|
};
|
|
|
|
/*
|
|
* include common fpga code (for esd boards)
|
|
*/
|
|
#include "../common/fpga.c"
|
|
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
int index, len, i;
|
|
int status;
|
|
|
|
#ifdef FPGA_DEBUG
|
|
/* set up serial port with default baudrate */
|
|
(void) get_clocks ();
|
|
gd->baudrate = CONFIG_BAUDRATE;
|
|
serial_init ();
|
|
console_init_f ();
|
|
#endif
|
|
|
|
/*
|
|
* Boot onboard FPGA
|
|
*/
|
|
/* first try 40er image */
|
|
gd->board_type = 40;
|
|
status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata));
|
|
if (status != 0) {
|
|
/* try xl30er image */
|
|
gd->board_type = 30;
|
|
status = fpga_boot ((unsigned char *) fpgadata_xl30, sizeof (fpgadata_xl30));
|
|
if (status != 0) {
|
|
/* booting FPGA failed */
|
|
#ifndef FPGA_DEBUG
|
|
/* set up serial port with default baudrate */
|
|
(void) get_clocks ();
|
|
gd->baudrate = CONFIG_BAUDRATE;
|
|
serial_init ();
|
|
console_init_f ();
|
|
#endif
|
|
printf ("\nFPGA: Booting failed ");
|
|
switch (status) {
|
|
case ERROR_FPGA_PRG_INIT_LOW:
|
|
printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_INIT_HIGH:
|
|
printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_DONE:
|
|
printf ("(Timeout: DONE not high after programming FPGA)\n ");
|
|
break;
|
|
}
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i = 0; i < 4; i++) {
|
|
len = fpgadata[index];
|
|
printf ("FPGA: %s\n", &(fpgadata[index + 1]));
|
|
index += len + 3;
|
|
}
|
|
putc ('\n');
|
|
/* delayed reboot */
|
|
for (i = 20; i > 0; i--) {
|
|
printf ("Rebooting in %2d seconds \r", i);
|
|
for (index = 0; index < 1000; index++)
|
|
udelay (1000);
|
|
}
|
|
putc ('\n');
|
|
do_reset (NULL, 0, 0, NULL);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
* IRQ 16 405GP internally generated; active low; level sensitive
|
|
* IRQ 17-24 RESERVED
|
|
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
|
|
* IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
|
|
* IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
|
|
* IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
|
|
* IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
|
|
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
|
|
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
|
|
*/
|
|
mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr (UIC0ER, 0x00000000); /* disable all ints */
|
|
mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
|
|
mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */
|
|
mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
|
|
mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
|
|
mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
out_be16((void *)0xf03000ec, 0x0fff); /* enable interrupts in fpga */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard (void)
|
|
{
|
|
int index;
|
|
int len;
|
|
char str[64];
|
|
int i = getenv_f("serial#", str, sizeof (str));
|
|
const unsigned char *fpga;
|
|
|
|
puts ("Board: ");
|
|
|
|
if (i == -1) {
|
|
puts ("### No HW ID - assuming AR405");
|
|
} else {
|
|
puts(str);
|
|
}
|
|
|
|
puts ("\nFPGA: ");
|
|
|
|
/* display infos on fpgaimage */
|
|
if (gd->board_type == 30) {
|
|
fpga = fpgadata_xl30;
|
|
} else {
|
|
fpga = fpgadata;
|
|
}
|
|
index = 15;
|
|
for (i = 0; i < 4; i++) {
|
|
len = fpga[index];
|
|
printf ("%s ", &(fpga[index + 1]));
|
|
index += len + 3;
|
|
}
|
|
|
|
putc ('\n');
|
|
|
|
/*
|
|
* Disable sleep mode in LXT971
|
|
*/
|
|
lxt971_no_sleep();
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#if 1 /* test-only: some internal test routines... */
|
|
#define DIGEN ((void *)0xf03000b4) /* u8 */
|
|
#define DIGOUT ((void *)0xf03000b0) /* u16 */
|
|
#define DIGIN ((void *)0xf03000a0) /* u16 */
|
|
|
|
/*
|
|
* Some test routines
|
|
*/
|
|
int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int i;
|
|
int k;
|
|
int start;
|
|
int end;
|
|
|
|
if (argc != 3) {
|
|
puts("Usage: digtest n_start n_end (digtest 0 7)\n");
|
|
return 0;
|
|
}
|
|
|
|
start = simple_strtol (argv[1], NULL, 10);
|
|
end = simple_strtol (argv[2], NULL, 10);
|
|
|
|
/*
|
|
* Enable digital outputs
|
|
*/
|
|
out_8(DIGEN, 0x08);
|
|
|
|
printf("\nStarting digital In-/Out Test from I/O %d to %d (Cntrl-C to abort)...\n",
|
|
start, end);
|
|
|
|
/*
|
|
* Set outputs one by one
|
|
*/
|
|
for (;;) {
|
|
for (i=start; i<=end; i++) {
|
|
out_be16(DIGOUT, 0x0001 << i);
|
|
for (k=0; k<200; k++)
|
|
udelay(1000);
|
|
|
|
if (in_be16(DIGIN) != (0x0001 << i)) {
|
|
printf("ERROR: OUT=0x%04X, IN=0x%04X\n",
|
|
0x0001 << i, in_be16(DIGIN));
|
|
return 0;
|
|
}
|
|
|
|
/* Abort if ctrl-c was pressed */
|
|
if (ctrlc()) {
|
|
puts("\nAbort\n");
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
digtest, 3, 1, do_digtest,
|
|
"Test digital in-/output",
|
|
""
|
|
);
|
|
|
|
#define ERROR_DELTA 256
|
|
|
|
struct io {
|
|
short val;
|
|
short dummy;
|
|
};
|
|
|
|
int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
short val;
|
|
int i;
|
|
int volt;
|
|
struct io *out;
|
|
struct io *in;
|
|
|
|
out = (struct io *)0xf0300090;
|
|
in = (struct io *)0xf0300000;
|
|
|
|
i = simple_strtol (argv[1], NULL, 10);
|
|
|
|
volt = 0;
|
|
printf("Setting Channel %d to %dV...\n", i, volt);
|
|
out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
|
|
udelay(10000);
|
|
val = in_be16((void *)&(in[i*2].val));
|
|
printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
|
|
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
|
|
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
|
|
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
|
|
((volt * 0x7fff) / 40) + ERROR_DELTA);
|
|
return -1;
|
|
}
|
|
val = in_be16((void *)&(in[i*2+1].val));
|
|
printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
|
|
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
|
|
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
|
|
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
|
|
((volt * 0x7fff) / 40) + ERROR_DELTA);
|
|
return -1;
|
|
}
|
|
|
|
volt = 5;
|
|
printf("Setting Channel %d to %dV...\n", i, volt);
|
|
out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
|
|
udelay(10000);
|
|
val = in_be16((void *)&(in[i*2].val));
|
|
printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
|
|
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
|
|
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
|
|
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
|
|
((volt * 0x7fff) / 40) + ERROR_DELTA);
|
|
return -1;
|
|
}
|
|
val = in_be16((void *)&(in[i*2+1].val));
|
|
printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
|
|
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
|
|
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
|
|
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
|
|
((volt * 0x7fff) / 40) + ERROR_DELTA);
|
|
return -1;
|
|
}
|
|
|
|
volt = 10;
|
|
printf("Setting Channel %d to %dV...\n", i, volt);
|
|
out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
|
|
udelay(10000);
|
|
val = in_be16((void *)&(in[i*2].val));
|
|
printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
|
|
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
|
|
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
|
|
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
|
|
((volt * 0x7fff) / 40) + ERROR_DELTA);
|
|
return -1;
|
|
}
|
|
val = in_be16((void *)&(in[i*2+1].val));
|
|
printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
|
|
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
|
|
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
|
|
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
|
|
((volt * 0x7fff) / 40) + ERROR_DELTA);
|
|
return -1;
|
|
}
|
|
|
|
printf("Channel %d OK!\n", i);
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
anatest, 2, 1, do_anatest,
|
|
"Test analog in-/output",
|
|
""
|
|
);
|
|
|
|
|
|
int counter = 0;
|
|
|
|
void cyclicInt(void *ptr)
|
|
{
|
|
out_be16((void *)0xf03000e8, 0x0800); /* ack int */
|
|
counter++;
|
|
}
|
|
|
|
|
|
int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
ulong *incin;
|
|
int i;
|
|
|
|
incin = (ulong *)0xf0300040;
|
|
|
|
/*
|
|
* Clear inc counter
|
|
*/
|
|
out_be32((void *)&incin[0], 0);
|
|
out_be32((void *)&incin[1], 0);
|
|
out_be32((void *)&incin[2], 0);
|
|
out_be32((void *)&incin[3], 0);
|
|
|
|
incin = (ulong *)0xf0300050;
|
|
|
|
/*
|
|
* Inc a little
|
|
*/
|
|
for (i=0; i<10000; i++) {
|
|
switch (i & 0x03) {
|
|
case 0:
|
|
out_8(DIGEN, 0x02);
|
|
break;
|
|
case 1:
|
|
out_8(DIGEN, 0x03);
|
|
break;
|
|
case 2:
|
|
out_8(DIGEN, 0x01);
|
|
break;
|
|
case 3:
|
|
out_8(DIGEN, 0x00);
|
|
break;
|
|
}
|
|
udelay(10);
|
|
}
|
|
|
|
printf("Inc 0 = %d\n", in_be32((void *)&incin[0]));
|
|
printf("Inc 1 = %d\n", in_be32((void *)&incin[1]));
|
|
printf("Inc 2 = %d\n", in_be32((void *)&incin[2]));
|
|
printf("Inc 3 = %d\n", in_be32((void *)&incin[3]));
|
|
|
|
out_be16((void *)0xf03000e0, 0x0c80-1); /* set counter */
|
|
out_be16((void *)0xf03000ec,
|
|
in_be16((void *)0xf03000ec) | 0x0800); /* enable int */
|
|
irq_install_handler (30, (interrupt_handler_t *) cyclicInt, NULL);
|
|
printf("counter=%d\n", counter);
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
inctest, 3, 1, do_inctest,
|
|
"Test incremental encoder inputs",
|
|
""
|
|
);
|
|
#endif
|