mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
2f002eceae
The board revision is detected accessing to the pmic, that is not available before relocation (I2C). This generates the following error: CPU: Freescale i.MX35 rev 2.0 at 532 MHz. Reset cause: WDOG <reg num> = 7 is invalid. Should be less than 0 Board: MX35 PDK 1.0 The revision number is wrong, as a default value is printed (tested on a mx35pdk Rev. 2.0). Move the output in the board_late_init(), when pmic can be accessed. Signed-off-by: Stefano Babic <sbabic@denx.de>
277 lines
8 KiB
C
277 lines
8 KiB
C
/*
|
|
* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
|
|
*
|
|
* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/mx35_pins.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <i2c.h>
|
|
#include <pmic.h>
|
|
#include <fsl_pmic.h>
|
|
#include <mc9sdz60.h>
|
|
#include <mc13892.h>
|
|
#include <linux/types.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <netdev.h>
|
|
|
|
#ifndef CONFIG_BOARD_LATE_INIT
|
|
#error "CONFIG_BOARD_LATE_INIT must be set for this board"
|
|
#endif
|
|
|
|
#ifndef CONFIG_BOARD_EARLY_INIT_F
|
|
#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int dram_init(void)
|
|
{
|
|
u32 size1, size2;
|
|
|
|
size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
|
|
size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
|
|
|
|
gd->ram_size = size1 + size2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void dram_init_banksize(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
|
|
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
|
|
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
|
|
}
|
|
|
|
static void setup_iomux_i2c(void)
|
|
{
|
|
int pad;
|
|
|
|
/* setup pins for I2C1 */
|
|
mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION);
|
|
mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION);
|
|
|
|
pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \
|
|
| PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain);
|
|
|
|
mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad);
|
|
mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad);
|
|
}
|
|
|
|
|
|
static void setup_iomux_spi(void)
|
|
{
|
|
mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION);
|
|
mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION);
|
|
mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION);
|
|
mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION);
|
|
mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
|
|
}
|
|
|
|
static void setup_iomux_fec(void)
|
|
{
|
|
int pad;
|
|
|
|
/* setup pins for FEC */
|
|
mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC);
|
|
mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC);
|
|
|
|
pad = (PAD_CTL_DRV_3_3V | PAD_CTL_PUE_PUD | PAD_CTL_ODE_CMOS | \
|
|
PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW);
|
|
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_TX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_RX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_RX_DV, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_COL, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_RDATA0, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_TDATA0, pad | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_TX_EN, pad | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_MDC, pad | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_MDIO, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_TX_ERR, pad | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_RX_ERR, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_CRS, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_RDATA1, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_TDATA1, pad | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_RDATA2, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_TDATA2, pad | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_RDATA3, pad | PAD_CTL_HYS_SCHMITZ | \
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD);
|
|
mxc_iomux_set_pad(MX35_PIN_FEC_TDATA3, pad | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_PKE_NONE | PAD_CTL_100K_PD);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
struct ccm_regs *ccm =
|
|
(struct ccm_regs *)IMX_CCM_BASE;
|
|
|
|
/* enable clocks */
|
|
writel(readl(&ccm->cgr0) |
|
|
MXC_CCM_CGR0_EMI_MASK |
|
|
MXC_CCM_CGR0_EDI0_MASK |
|
|
MXC_CCM_CGR0_EPIT1_MASK,
|
|
&ccm->cgr0);
|
|
|
|
writel(readl(&ccm->cgr1) |
|
|
MXC_CCM_CGR1_FEC_MASK |
|
|
MXC_CCM_CGR1_GPIO1_MASK |
|
|
MXC_CCM_CGR1_GPIO2_MASK |
|
|
MXC_CCM_CGR1_GPIO3_MASK |
|
|
MXC_CCM_CGR1_I2C1_MASK |
|
|
MXC_CCM_CGR1_I2C2_MASK |
|
|
MXC_CCM_CGR1_IPU_MASK,
|
|
&ccm->cgr1);
|
|
|
|
/* Setup NAND */
|
|
__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
|
|
|
|
setup_iomux_i2c();
|
|
setup_iomux_fec();
|
|
setup_iomux_spi();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
gd->bd->bi_arch_number = MACH_TYPE_MX35_3DS; /* board id for linux */
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int pmic_detect(void)
|
|
{
|
|
unsigned int id;
|
|
struct pmic *p = get_pmic();
|
|
|
|
pmic_reg_read(p, REG_IDENTIFICATION, &id);
|
|
|
|
id = (id >> 6) & 0x7;
|
|
if (id == 0x7)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
u32 get_board_rev(void)
|
|
{
|
|
int rev;
|
|
|
|
rev = pmic_detect();
|
|
|
|
return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
u8 val;
|
|
u32 pmic_val;
|
|
struct pmic *p;
|
|
|
|
pmic_init();
|
|
if (pmic_detect()) {
|
|
p = get_pmic();
|
|
mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION |
|
|
MUX_CONFIG_ALT1);
|
|
|
|
pmic_reg_read(p, REG_SETTING_0, &pmic_val);
|
|
pmic_reg_write(p, REG_SETTING_0,
|
|
pmic_val | VO_1_30V | VO_1_50V);
|
|
pmic_reg_read(p, REG_MODE_0, &pmic_val);
|
|
pmic_reg_write(p, REG_MODE_0, pmic_val | VGEN3EN);
|
|
|
|
mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO);
|
|
mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0);
|
|
|
|
gpio_direction_output(37, 1);
|
|
}
|
|
|
|
val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;
|
|
mc9sdz60_reg_write(MC9SDZ60_REG_GPIO_1, val);
|
|
mdelay(200);
|
|
|
|
val = mc9sdz60_reg_read(MC9SDZ60_REG_RESET_1) & 0x7F;
|
|
mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val);
|
|
mdelay(200);
|
|
|
|
val |= 0x80;
|
|
mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val);
|
|
|
|
/* Print board revision */
|
|
printf("Board: MX35 PDK %d.0\n", ((get_board_rev() >> 8) + 1) & 0x0F);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = -ENODEV;
|
|
#if defined(CONFIG_SMC911X)
|
|
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
|
|
#endif
|
|
|
|
cpu_eth_init(bis);
|
|
|
|
return rc;
|
|
}
|