u-boot/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
Patrick Delaunay 189ec2fee6 arm: dts: stm32mp15: alignment with v5.18
Device tree alignment with Linux kernel v5.18-rc2:
- ARM: dts: stm32: Add support for the emtrion emSBC-Argon
  (only the pincontrol part)
- ARM: dts: stm32: Drop duplicate status okay from DHCOM gpioc node
- ARM: dts: stm32: add st,stm32-sdmmc2 compatible on stm32mp151
- ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
- ARM: dts: stm32: use exti 19 as main interrupt to support RTC wakeup on
  stm32mp157
- ARM: dts: stm32: add DMA configuration to UART nodes on stm32mp151
- ARM: dts: stm32: keep uart4 behavior on *
- ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp15

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10 13:54:47 +02:00

59 lines
1.3 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (c) STMicroelectronics 2019 - All Rights Reserved
* Copyright (c) 2020 Engicam srl
* Copyright (c) 2020 Amarula Solutons(India)
*/
/dts-v1/;
#include "stm32mp157.dtsi"
#include "stm32mp157a-microgea-stm32mp1.dtsi"
#include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxaa-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 Carrier Board";
compatible = "engicam,microgea-stm32mp1-microdev2.0",
"engicam,microgea-stm32mp1", "st,stm32mp157";
aliases {
serial0 = &uart4;
serial1 = &uart8;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&sdmmc1 {
bus-width = <4>;
disable-wp;
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc1_b4_pins_a>;
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
st,neg-edge;
vmmc-supply = <&vdd>;
status = "okay";
};
&uart4 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
/delete-property/dmas;
/delete-property/dma-names;
status = "okay";
};
/* J31: RS323 */
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a>;
/delete-property/dmas;
/delete-property/dma-names;
status = "okay";
};