u-boot/arch/arm/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi
Marcel Ziswiler 5d7a95f499 imx6ul/imx6ull: synchronise device trees with linux
Synchronise device trees with linux v5.19-rc5.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:00 +02:00

90 lines
2.1 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2021 PHYTEC Messtechnik GmbH
* Author: Yunus Bas <y.bas@phytec.de>
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
reg_wl_en: regulator-wl-en {
compatible = "regulator-fixed";
regulator-name = "wlan_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wl>;
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
status = "disabled";
};
};
&iomuxc {
pinctrl_bt: btgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3031 /* BT ENABLE */
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x3031 /* HOST WAKEUP */
MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x3031 /* DEV WAKEUP */
>;
};
pinctrl_uart2_bt: uart2grp-bt {
fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x17059
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x17059
MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x17059
MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x17059
>;
};
pinctrl_usdhc2_wl: usdhc2grp-wl {
fsl,pins = <
MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x10051
MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x10061
MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x10051
MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x10051
MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x10051
MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x10051
>;
};
pinctrl_wl: wlgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3031 /* WLAN ENABLE */
>;
};
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_bt &pinctrl_bt>;
uart-has-rtscts;
status = "disabled";
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
&usdhc2 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_wl>;
vmmc-supply = <&reg_wl_en>;
bus-width = <4>;
non-removable;
no-1-8-v;
status = "disabled";
brmcf: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
};
};