mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 03:53:31 +00:00
e3f92093d7
On of the MiniPCIe ports on Turris Omnia is also a mSATA port. Whether it works in SATA or PCIe mode is determined by a strapping pin, which value is read from the MCU. We already determine which type of card is connected when configuring SerDeses. But until now we left both SATA and PCIe port 0 nodes in device tree enabled, and so the SATA driver is probed in U-Boot / Linux even if we know there is no mSATA card, and similarly PCIe driver tries to link on port 0 even if we know there is mSATA card, not a PCIe card. Fixup device tree blob to disable SATA node if mSATA card is not present, and to disable PCIe port 0 node if mSATA card is present. Do this for U-Boot's DT blob before relocation and also for kernel DT blob before booting. This ensures that software does not try to use SATA or PCIe HW when corresponding PHY is not configured. Signed-off-by: Pali Rohár <pali@kernel.org> [ refactored and fixed some issues ] Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> |
||
|---|---|---|
| .. | ||
| MAINTAINERS | ||
| Makefile | ||
| turris_omnia.c | ||