u-boot/board/phytec/pcm051/board.h
Lars Poeschel 1c1b7c3739 pcm051: Add support for Phytec phyCORE-AM335x
The board is named pcm051 and has this hardware:
SOC: TI AM3359
DDR3-RAM: 2x MT41J256M8HX-15EIT:D 512MiB
ETH 1: LAN8710AI
SPI-Flash: W25Q64BVSSIG
RTC: RV-4162-C7
I2C-EEPROM: CAT32WC32
NAND: MT29F4G08_VFPGA63
PMIC: TPS65910A3
LCD

Supported:
UART 1
MMC/SD
ETH 1
USB
I2C
SPI

Not yet supported:
NAND
RTC
LCD

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
[trini: Add #define CONFIG_PHY_ADDR 0 to config]
Signed-off-by: Tom Rini <trini@ti.com>
2013-02-07 10:36:26 -05:00

33 lines
1.1 KiB
C

/*
* board.h
*
* Phytec phyCORE-AM335x (pcm051) boards information header
*
* Copyright (C) 2013, Lemonage Software GmbH
* Author Lars Poeschel <poeschel@lemonage.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* We have three pin mux functions that must exist. We must be able to enable
* uart0, for initial output and i2c0 to read the main EEPROM. We then have a
* main pinmux function that can be overridden to enable all other pinmux that
* is required on the board.
*/
void enable_uart0_pin_mux(void);
void enable_i2c0_pin_mux(void);
void enable_board_pin_mux(void);
void enable_cbmux_pin_mux(void);
#endif