u-boot/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
Siva Durga Prasad Paladugu 3a55cb38c5 arm64: zynqmp: Dont use 4K sector erase by default for spi-flashes
Dont use 4K sector erase by default, Disabling this
would use 64K sector erase and decreases erase time.
Also disabled by the fact that UBIFS and JFFS2 won't work
with 4K sector erase.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-18 09:32:06 +01:00

60 lines
1.4 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_IDENT_STRING=" Xilinx ZynqMP ZC1751 xm018 dc4"
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm018-dc4"
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SYS_PROMPT="ZynqMP> "
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_CLK=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_FPGA_LOADBP=y
CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_DM_ETH=y
CONFIG_PHY_GIGE=y
CONFIG_ZYNQ_GEM=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ZYNQ_SERIAL=y