u-boot/board/friendlyarm/Kconfig
Stefan Bosch d1611086e0 arm: add support for SoC s5p4418 (cpu) / nanopi2 board
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- SPL not supported yet --> no spl-dir in arch/arm/cpu/armv7/s5p4418/.
  Appropriate line in Makefile removed.
- cpu.c: '#include <cpu_func.h>' added.
- arch/arm/cpu/armv7/s5p4418/u-boot.lds removed, is not required
  anylonger.
- "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added to
  arch/arm/cpu/armv7/Makefile since s5p-common/pwm.c is used instead
  of drivers/pwm/pwm-nexell.c.
- s5p4418.dtsi: '#include "../../../include/generated/autoconf.h"'
  removed, is not necessary, error at out-of-tree building.
  '#ifdef CONFIG_CPU_NXP4330'-blocks (2x) removed. Some minor changes
  regarding mmc. 'u-boot,dm-pre-reloc' added to dp0 because of added
  DM_VIDEO support.
- board/s5p4418/ renamed to board/friendlyarm/
- All s5p4418-boards except nanopi2 removed because there is no
  possibility to test the other boards.
- Kconfig: Changes to have a structure like mach-bcm283x (RaspberryPi),
  e.g. "config ..." entries moved from/to other Kconfig.
- "CONFIG_" removed from several s5p4418/nanopi2 specific defines
  because the appropriate values do not need to be configurable.
- nanopi2/board.c: All getenv(), getenv_ulong(), setenv() and saveenv()
  renamed to env_get(), env_get_ulong(), env_set() and env_save(),
  respectively. MACH_TYPE_S5P4418 is not defined anymore, therefore
  appropriate code removed (not necessary for DT-kernels).
- nanopi2/onewire.c: All crc8() renamed to crc8_ow() because crc8() is
  already defined in lib/crc8.c (with different parameters).
- dts: "nexell,s5pxx18-i2c" used instead of "i2c-gpio", i2c0 and
  i2c1 added. gmac-, ehci- and dwc2otg-entries removed because the
  appropriate functionality is not supported yet. New mmc-property
  "mmcboost" added.
  s5p4418-pinctrl.dtsi: gmac-entries removed, mmc- and i2c-entries
  added.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where
  possible (and similar).

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29 08:43:40 -04:00

37 lines
946 B
Text

choice
prompt "LCD backlight control"
optional
default S5P4418_ONEWIRE
config S5P4418_ONEWIRE
bool "I2C / 1-Wire"
help
This enables LCD-Backlight control for FriendlyARM LCD-panels.
I2C is used if available, otherwise 1-Wire is used.
config PWM_NX
bool "PWM"
help
This enables LCD-Backlight control via PWM.
endchoice
config ROOT_DEV
int "ROOT_DEV"
help
Environment variable rootdev is set to this value if env. var. firstboot
does not exist. Otherwise rootdev is set to the MMC boot device. rootdev
determines (together with env. var. bootpart) where the OS (linux) is
booted from.
config BOOT_PART
int "BOOT_PART"
help
Environment variable bootpart is set to this value. bootpart determines
(together with env. var. rootdev) where the OS (linux) is booted from.
config ROOT_PART
int "ROOT_PART"
help
Environment variable rootpart is set to this value.
source "board/friendlyarm/nanopi2/Kconfig"