u-boot/include/configs/tegra124-common.h
Marek Behún 56882dc4cb Convert CONFIG_USB_EHCI_IS_TDI to Kconfig
On mvebu this is defined if and only if !ARM64.

Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and
ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15 09:42:22 -04:00

68 lines
2.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2013
* NVIDIA Corporation <www.nvidia.com>
*/
#ifndef _TEGRA124_COMMON_H_
#define _TEGRA124_COMMON_H_
#include "tegra-common.h"
/*
* NS16550 Configuration
*/
#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
/*
* Miscellaneous configurable options
*/
#define CONFIG_STACKBASE 0x83800000 /* 56MB */
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
/*
* Memory layout for where various images get loaded by boot scripts:
*
* scriptaddr can be pretty much anywhere that doesn't conflict with something
* else. Put it above BOOTMAPSZ to eliminate conflicts.
*
* pxefile_addr_r can be pretty much anywhere that doesn't conflict with
* something else. Put it above BOOTMAPSZ to eliminate conflicts.
*
* kernel_addr_r must be within the first 128M of RAM in order for the
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
* should not overlap that area, or the kernel will have to copy itself
* somewhere else before decompression. Similarly, the address of any other
* data passed to the kernel shouldn't overlap the start of RAM. Pushing
* this up to 32M allows for a sizable kernel to be decompressed below the
* compressed load address.
*
* fdt_addr_r simply shouldn't overlap anything else. Choosing 48M allows for
* the compressed kernel to be up to 32M too.
*
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"fdtfile=" FDTFILE "\0" \
"fdt_addr_r=0x83000000\0" \
"ramdisk_addr_r=0x83100000\0"
/* Defines for SPL */
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
/* For USB EHCI controller */
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
/* GPU needs setup */
#define CONFIG_TEGRA_GPU
#endif /* _TEGRA124_COMMON_H_ */