mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 01:17:39 +00:00
30975fb73d
For Rockchip boards with the all rk8xx series PMICs (excluding the rk808), it is sometimes desirable to not boot whenever the device is plugged in. An example would be for the Odroid Go Advance. This provides a configurable option to check the PMIC says it was powered because of a plug-in event. If the value is 1 and this option is selected, the device shuts down shortly after printing a message to console stating the reason why it's shutting down. Powering up the board with the power button is not affected. This patch parallels the work done in the following patch series: https://lore.kernel.org/u-boot/20220121133732.2397273-1-andre.przywara@arm.com/ Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
239 lines
4.1 KiB
C
239 lines
4.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2015 Google, Inc
|
|
* Written by Simon Glass <sjg@chromium.org>
|
|
*/
|
|
|
|
#ifndef _PMIC_RK8XX_H_
|
|
#define _PMIC_RK8XX_H_
|
|
|
|
enum {
|
|
REG_SECONDS = 0x00,
|
|
REG_MINUTES,
|
|
REG_HOURS,
|
|
REG_DAYS,
|
|
REG_MONTHS,
|
|
REG_YEARS,
|
|
REG_WEEKS,
|
|
REG_ALARM_SECONDS,
|
|
REG_ALARM_MINUTES,
|
|
REG_ALARM_HOURS,
|
|
REG_ALARM_DAYS,
|
|
REG_ALARM_MONTHS,
|
|
REG_ALARM_YEARS,
|
|
|
|
REG_RTC_CTRL = 0x10,
|
|
REG_RTC_STATUS,
|
|
REG_RTC_INT,
|
|
REG_RTC_COMP_LSB,
|
|
REG_RTC_COMP_MSB,
|
|
|
|
ID_MSB = 0x17,
|
|
ID_LSB,
|
|
|
|
REG_CLK32OUT = 0x20,
|
|
REG_VB_MON,
|
|
REG_THERMAL,
|
|
REG_DCDC_EN,
|
|
REG_LDO_EN,
|
|
REG_SLEEP_SET_OFF1,
|
|
REG_SLEEP_SET_OFF2,
|
|
REG_DCDC_UV_STS,
|
|
REG_DCDC_UV_ACT,
|
|
REG_LDO_UV_STS,
|
|
REG_LDO_UV_ACT,
|
|
REG_DCDC_PG,
|
|
REG_LDO_PG,
|
|
REG_VOUT_MON_TDB,
|
|
REG_BUCK1_CONFIG,
|
|
REG_BUCK1_ON_VSEL,
|
|
REG_BUCK1_SLP_VSEL,
|
|
REG_BUCK1_DVS_VSEL,
|
|
REG_BUCK2_CONFIG,
|
|
REG_BUCK2_ON_VSEL,
|
|
REG_BUCK2_SLP_VSEL,
|
|
REG_BUCK2_DVS_VSEL,
|
|
REG_BUCK3_CONFIG,
|
|
REG_BUCK4_CONFIG,
|
|
REG_BUCK4_ON_VSEL,
|
|
REG_BUCK4_SLP_VSEL,
|
|
REG_BOOST_CONFIG_REG,
|
|
REG_LDO1_ON_VSEL,
|
|
REG_LDO1_SLP_VSEL,
|
|
REG_LDO2_ON_VSEL,
|
|
REG_LDO2_SLP_VSEL,
|
|
REG_LDO3_ON_VSEL,
|
|
REG_LDO3_SLP_VSEL,
|
|
REG_LDO4_ON_VSEL,
|
|
REG_LDO4_SLP_VSEL,
|
|
REG_LDO5_ON_VSEL,
|
|
REG_LDO5_SLP_VSEL,
|
|
REG_LDO6_ON_VSEL,
|
|
REG_LDO6_SLP_VSEL,
|
|
REG_LDO7_ON_VSEL,
|
|
REG_LDO7_SLP_VSEL,
|
|
REG_LDO8_ON_VSEL,
|
|
REG_LDO8_SLP_VSEL,
|
|
REG_DEVCTRL,
|
|
REG_INT_STS1,
|
|
REG_INT_STS_MSK1,
|
|
REG_INT_STS2,
|
|
REG_INT_STS_MSK2,
|
|
REG_IO_POL,
|
|
REG_OTP_VDD_EN,
|
|
REG_H5V_EN,
|
|
REG_SLEEP_SET_OFF,
|
|
REG_BOOST_LDO9_ON_VSEL,
|
|
REG_BOOST_LDO9_SLP_VSEL,
|
|
REG_BOOST_CTRL,
|
|
|
|
/* Not sure what this does */
|
|
REG_DCDC_ILMAX = 0x90,
|
|
REG_CHRG_COMP = 0x9a,
|
|
REG_SUP_STS = 0xa0,
|
|
REG_USB_CTRL,
|
|
REG1_CHRG_CTRL,
|
|
REG2_CHRG_CTRL,
|
|
REG3_CHRG_CTRL,
|
|
REG_BAT_CTRL,
|
|
REG_BAT_HTS_TS1,
|
|
REG_BAT_LTS_TS1,
|
|
REG_BAT_HTS_TS2,
|
|
REG_BAT_LTS_TS2,
|
|
REG_TS_CTRL,
|
|
REG_ADC_CTRL,
|
|
REG_ON_SOURCE,
|
|
REG_OFF_SOURCE,
|
|
REG_GGCON,
|
|
REG_GGSTS,
|
|
REG_FRAME_SMP_INTERV,
|
|
REG_AUTO_SLP_CUR_THR,
|
|
REG3_GASCNT_CAL,
|
|
REG2_GASCNT_CAL,
|
|
REG1_GASCNT_CAL,
|
|
REG0_GASCNT_CAL,
|
|
REG3_GASCNT,
|
|
REG2_GASCNT,
|
|
REG1_GASCNT,
|
|
REG0_GASCNT,
|
|
REGH_BAT_CUR_AVG,
|
|
REGL_BAT_CUR_AVG,
|
|
REGH_TS1_ADC,
|
|
REGL_TS1_ADC,
|
|
REGH_TS2_ADC,
|
|
REGL_TS2_ADC,
|
|
REGH_BAT_OCV,
|
|
REGL_BAT_OCV,
|
|
REGH_BAT_VOL,
|
|
REGL_BAT_VOL,
|
|
REGH_RELAX_ENTRY_THRES,
|
|
REGL_RELAX_ENTRY_THRES,
|
|
REGH_RELAX_EXIT_THRES,
|
|
REGL_RELAX_EXIT_THRES,
|
|
REGH_RELAX_VOL1,
|
|
REGL_RELAX_VOL1,
|
|
REGH_RELAX_VOL2,
|
|
REGL_RELAX_VOL2,
|
|
REGH_BAT_CUR_R_CALC,
|
|
REGL_BAT_CUR_R_CALC,
|
|
REGH_BAT_VOL_R_CALC,
|
|
REGL_BAT_VOL_R_CALC,
|
|
REGH_CAL_OFFSET,
|
|
REGL_CAL_OFFSET,
|
|
REG_NON_ACT_TIMER_CNT,
|
|
REGH_VCALIB0,
|
|
REGL_VCALIB0,
|
|
REGH_VCALIB1,
|
|
REGL_VCALIB1,
|
|
REGH_IOFFSET,
|
|
REGL_IOFFSET,
|
|
REG_SOC,
|
|
REG3_REMAIN_CAP,
|
|
REG2_REMAIN_CAP,
|
|
REG1_REMAIN_CAP,
|
|
REG0_REMAIN_CAP,
|
|
REG_UPDAT_LEVE,
|
|
REG3_NEW_FCC,
|
|
REG2_NEW_FCC,
|
|
REG1_NEW_FCC,
|
|
REG0_NEW_FCC,
|
|
REG_NON_ACT_TIMER_CNT_SAVE,
|
|
REG_OCV_VOL_VALID,
|
|
REG_REBOOT_CNT,
|
|
REG_POFFSET,
|
|
REG_MISC_MARK,
|
|
REG_HALT_CNT,
|
|
REGH_CALC_REST,
|
|
REGL_CALC_REST,
|
|
SAVE_DATA19,
|
|
RK808_NUM_OF_REGS,
|
|
};
|
|
|
|
enum {
|
|
RK817_REG_SYS_CFG3 = 0xf4,
|
|
};
|
|
|
|
enum {
|
|
RK816_REG_DCDC_EN1 = 0x23,
|
|
RK816_REG_DCDC_EN2,
|
|
RK816_REG_DCDC_SLP_EN,
|
|
RK816_REG_LDO_SLP_EN,
|
|
RK816_REG_LDO_EN1 = 0x27,
|
|
RK816_REG_LDO_EN2,
|
|
};
|
|
|
|
enum {
|
|
RK805_ID = 0x8050,
|
|
RK808_ID = 0x0000,
|
|
RK809_ID = 0x8090,
|
|
RK816_ID = 0x8160,
|
|
RK817_ID = 0x8170,
|
|
RK818_ID = 0x8180,
|
|
};
|
|
|
|
enum {
|
|
RK817_POWER_EN0 = 0xb1,
|
|
RK817_POWER_EN1,
|
|
RK817_POWER_EN2,
|
|
RK817_POWER_EN3,
|
|
};
|
|
|
|
#define RK817_POWER_EN_SAVE0 0x99
|
|
#define RK817_POWER_EN_SAVE1 0xa4
|
|
|
|
#define RK817_ID_MSB 0xed
|
|
#define RK817_ID_LSB 0xee
|
|
#define RK8XX_ID_MSK 0xfff0
|
|
|
|
#define RK817_PMIC_SYS_CFG3 0xf4
|
|
#define RK817_GPIO_INT_CFG 0xfe
|
|
|
|
#define RK8XX_ON_SOURCE 0xae
|
|
#define RK8XX_OFF_SOURCE 0xaf
|
|
#define RK817_BUCK4_CMIN 0xc6
|
|
#define RK817_ON_SOURCE 0xf5
|
|
#define RK817_OFF_SOURCE 0xf6
|
|
|
|
#define RK8XX_ON_PWRON BIT(7)
|
|
#define RK8XX_ON_PLUG_IN BIT(6)
|
|
|
|
struct reg_data {
|
|
u8 reg;
|
|
u8 val;
|
|
u8 mask;
|
|
};
|
|
struct rk8xx_reg_table {
|
|
char *name;
|
|
u8 reg_ctl;
|
|
u8 reg_vol;
|
|
};
|
|
|
|
struct rk8xx_priv {
|
|
int variant;
|
|
};
|
|
|
|
int rk8xx_spl_configure_buck(struct udevice *pmic, int buck, int uvolt);
|
|
int rk818_spl_configure_usb_input_current(struct udevice *pmic, int current_ma);
|
|
int rk818_spl_configure_usb_chrg_shutdown(struct udevice *pmic, int uvolt);
|
|
|
|
#endif
|