u-boot/drivers
Andrejs Cainikovs 31d4045d4b net: dm: fec: Support phy-reset-post-delay property
As per Linux kernel DT binding doc:
- phy-reset-post-delay : Post reset delay in milliseconds. If present then
  a delay of phy-reset-post-delay milliseconds will be observed after the
  phy-reset-gpios has been toggled. Can be omitted thus no delay is
  observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@netmodule.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2019-04-08 15:23:28 +02:00
..
adc adc: exynos-adc: Fix wrong bit operation used to stop the ADC 2019-03-11 15:53:19 +09:00
ata scsi: ceva: add ls2080a soc support 2018-12-06 14:38:03 -08:00
axi drivers: cosmetic: Convert SPDX license tags to Linux Kernel style 2018-10-28 09:26:39 -04:00
bios_emulator bios_emulator: remove assignment without effect 2018-07-23 14:33:21 -04:00
block blk: Increase cache element size 2019-01-15 15:28:53 -05:00
board drivers: cosmetic: Convert SPDX license tags to Linux Kernel style 2018-10-28 09:26:39 -04:00
bootcount bootcount: add a DM RTC backing store for bootcount 2018-12-10 10:04:45 +01:00
clk clk: sunxi: a10: Add CLK_AHB_GMAC 2019-04-01 21:45:15 +05:30
core dm: syscon: Don't require a regmap for PCI devices 2019-02-20 15:21:44 +08:00
cpu cpu: Bind timer driver for boot hart 2019-02-27 09:12:33 +08:00
crypto SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ddr mv_ddr: ddr3: only use active chip-selects when tuning ODT 2019-03-19 09:22:05 +01:00
demo SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
dfu dfu: mmc: call fs functions instead of run_command 2019-01-30 21:22:53 -05:00
dma dma: add bcm6348-iudma support 2018-12-19 15:23:00 +01:00
fastboot fastboot: common: fix default fastboot_boot on 64-bit 2019-03-16 13:29:43 +01:00
firmware firmware: psci: introduce SPL_ARM_PSCI_FW 2018-12-12 12:14:25 -05:00
fpga ARM: socfpga: stratix10: Return valid error code from FPGA driver 2019-02-18 13:00:54 +01:00
gpio gpio: altera_pio: fix get_value 2019-02-25 16:07:36 +01:00
hwspinlock hwspinlock: add stm32 hardware spinlock support 2018-12-06 23:26:33 -05:00
i2c i2c: i2c_cdns: Fix below warnings with checker tool 2019-03-21 08:21:43 +01:00
input Kconfig: tegra: Migrate TEGRA_KEYBOARD 2019-02-20 09:01:45 -07:00
led dm: led: move default state support in led uclass 2018-08-10 10:27:32 -04:00
mailbox drivers: cosmetic: Convert SPDX license tags to Linux Kernel style 2018-10-28 09:26:39 -04:00
memory SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
misc xilinx: common: Remove !DM_i2C code for reading mac from eeprom 2019-02-14 14:31:10 +01:00
mmc mmc: correct the HS400 initialization process 2019-03-29 10:53:18 -04:00
mtd Convert CONFIG_SF_DEFAULT_* to Kconfig 2019-03-25 17:36:53 -04:00
net net: dm: fec: Support phy-reset-post-delay property 2019-04-08 15:23:28 +02:00
nvme blk: Call part_init() in the post_probe() method 2018-11-14 09:16:27 -08:00
pch pch: Add ioctl support 2019-02-20 15:27:08 +08:00
pci pci: pci_mvebu: Add comment about missing of_n_addr_cells() call 2019-03-19 09:22:05 +01:00
pcmcia SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
phy phy: Also allow MESON_GXM for MESON_GXL_USB_PHY 2019-04-03 10:23:38 -04:00
pinctrl pinctrl: rockchip: Add 32bit writing function for rk3288 gpio0 pinctrl 2019-03-29 09:24:44 +01:00
power Merge branch 'master' of git://git.denx.de/u-boot-samsung 2019-03-14 11:37:11 -04:00
pwm pwm: sunxi: choose best prescaler to improve PWM resolution 2018-10-24 21:57:16 +05:30
qe drivers: qe: add TFABOOT support 2018-12-06 14:37:51 -08:00
ram rockchip: ram: update license for sdram driver 2019-01-02 22:37:10 +01:00
remoteproc spl: Allow remoteproc drivers to be used within SPL 2018-09-11 08:32:55 -04:00
reset reset: Add Allwinner RESET driver 2019-01-18 22:19:08 +05:30
rtc rtc: m41t62: Convert the RTC driver to support the driver model (DM) 2018-12-03 10:44:10 -05:00
scsi dm: scsi: report correct device number 2019-02-19 08:55:43 -05:00
serial imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdef 2019-03-13 09:14:35 +01:00
smem drivers: smem: sandbox 2018-07-19 16:31:38 -04:00
soc SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
sound x86: Add sound support for samus 2019-02-20 15:27:11 +08:00
spi spi: Rename sun4i_spi.c into spi-sunxi.c 2019-03-04 18:08:56 +05:30
spmi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
sysreset x86: Add efi runtime reset 2019-03-11 00:44:42 +01:00
tee tee: change return code for REE FS supplicant cmd 2018-12-15 11:49:19 -05:00
thermal SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
timer x86: tsc: Add support for native calibration of TSC freq 2019-02-12 14:37:16 +08:00
tpm tpm: Export the open/close functions 2018-11-29 09:30:06 -07:00
usb usb: udc-uclass: Fixed problem when no alias is defined in DT 2019-03-16 13:29:43 +01:00
video sunxi: video: HDMI: Fix clock setup 2019-03-28 23:45:41 +01:00
virtio virtio: Add a Sandbox transport driver 2018-11-14 09:16:28 -08:00
w1 w1: Add driver for i.MX bus master controller 2019-01-01 14:12:18 +01:00
w1-eeprom w1-eeprom: Add support for Maxim DS2502 add only memory 2018-11-16 16:51:55 -05:00
watchdog watchdog: bcm6345: allow to use this driver on arm bcm63158 2019-02-09 07:50:59 -05:00
Kconfig x86: sandbox: pch: Add a CONFIG option for PCH 2019-02-20 15:25:30 +08:00
Makefile x86: sandbox: pch: Add a CONFIG option for PCH 2019-02-20 15:25:30 +08:00