mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
118 lines
2.7 KiB
C
118 lines
2.7 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* (C) Copyright 2002
|
|
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
|
|
*
|
|
* (C) Copyright 2009
|
|
* Michel Pollet <buserror@gmail.com>
|
|
*
|
|
* (C) Copyright 2012
|
|
* Gabriel Huau <contact@huau-gabriel.fr>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/s3c2440.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <netdev.h>
|
|
#include "mini2440.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static inline void pll_delay(unsigned long loops)
|
|
{
|
|
__asm__ volatile ("1:\n"
|
|
"subs %0, %1, #1\n"
|
|
"bne 1b" : "=r" (loops) : "0" (loops));
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
struct s3c24x0_clock_power * const clk_power =
|
|
s3c24x0_get_base_clock_power();
|
|
|
|
/* to reduce PLL lock time, adjust the LOCKTIME register */
|
|
clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */
|
|
clk_power->clkdivn = CLKDIVN_VAL;
|
|
|
|
/* configure UPLL */
|
|
clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
|
|
/* some delay between MPLL and UPLL */
|
|
pll_delay(100);
|
|
|
|
/* configure MPLL */
|
|
clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
|
|
|
|
/* some delay between MPLL and UPLL */
|
|
pll_delay(10000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Miscellaneous platform dependent initialisations
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
|
|
|
|
/* IOMUX Port H : UART Configuration */
|
|
gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 |
|
|
IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2;
|
|
|
|
gpio_direction_output(GPH8, 0);
|
|
gpio_direction_output(GPH9, 0);
|
|
gpio_direction_output(GPH10, 0);
|
|
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl();
|
|
|
|
/*
|
|
* Configuring bus width and timing
|
|
* Initialize clocks for each bank 0..5
|
|
* Bank 3 and 4 are used for DM9000
|
|
*/
|
|
writel(BANK_CONF, &memctl->bwscon);
|
|
writel(B0_CONF, &memctl->bankcon[0]);
|
|
writel(B1_CONF, &memctl->bankcon[1]);
|
|
writel(B2_CONF, &memctl->bankcon[2]);
|
|
writel(B3_CONF, &memctl->bankcon[3]);
|
|
writel(B4_CONF, &memctl->bankcon[4]);
|
|
writel(B5_CONF, &memctl->bankcon[5]);
|
|
|
|
/* Bank 6 and 7 are used for DRAM */
|
|
writel(SDRAM_64MB, &memctl->bankcon[6]);
|
|
writel(SDRAM_64MB, &memctl->bankcon[7]);
|
|
|
|
writel(MEM_TIMING, &memctl->refresh);
|
|
writel(BANKSIZE_CONF, &memctl->banksize);
|
|
writel(B6_MRSR, &memctl->mrsrb6);
|
|
writel(B7_MRSR, &memctl->mrsrb7);
|
|
|
|
gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
|
|
PHYS_SDRAM_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_DRIVER_DM9000
|
|
return dm9000_initialize(bis);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|