mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 22:52:18 +00:00
a9479f0431
DFU spec mentions it as a method to upgrade firmware (software stored in writable non-volatile memory). It also says other potential uses of DFU is beyond scope of the spec. Here such a beyond the scope use is being attempted - directly pumping binary images from host via USB to RAM. This facility is a developer centric one in that it gives advantage over upgrading non-volatile memory for testing new images every time during development and/or testing. Directly putting image onto RAM would speed up upgrade process. This and convenience was the initial thoughts that led to doing this, speed improvement over MMC was only 1 second though - 6 sec on RAM as opposed to 7 sec on MMC in beagle bone, perhaps enabling cache and/or optimizing DFU framework to avoid multiple copy for ram (if worth) may help, and on other platforms and other boot media like NAND maybe improvement would be higher. And for a platform that doesn't yet have proper DFU suppport for non-volatile media's, DFU to RAM can be used. Another minor advantage would be to increase life of mmc/nand as it would be less used during development/testing. usage: <image name> ram <start address> <size> eg. kernel ram 0x81000000 0x1000000 Downloading images to RAM using DFU is not something new, this is acheived in openmoko also. DFU on RAM can be used for extracting RAM contents to host using dfu upload. Perhaps this can be extended to io for squeezing out register dump through usb, if it is worth. Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Gerhard Sittig <gsi@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Heiko Schocher <hs@denx.de>
442 lines
9.1 KiB
C
442 lines
9.1 KiB
C
/*
|
|
* dfu.c -- DFU back-end routines
|
|
*
|
|
* Copyright (C) 2012 Samsung Electronics
|
|
* author: Lukasz Majewski <l.majewski@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <mmc.h>
|
|
#include <fat.h>
|
|
#include <dfu.h>
|
|
#include <linux/list.h>
|
|
#include <linux/compiler.h>
|
|
|
|
static bool dfu_reset_request;
|
|
static LIST_HEAD(dfu_list);
|
|
static int dfu_alt_num;
|
|
|
|
bool dfu_reset(void)
|
|
{
|
|
return dfu_reset_request;
|
|
}
|
|
|
|
void dfu_trigger_reset()
|
|
{
|
|
dfu_reset_request = true;
|
|
}
|
|
|
|
static int dfu_find_alt_num(const char *s)
|
|
{
|
|
int i = 0;
|
|
|
|
for (; *s; s++)
|
|
if (*s == ';')
|
|
i++;
|
|
|
|
return ++i;
|
|
}
|
|
|
|
int dfu_init_env_entities(char *interface, int dev)
|
|
{
|
|
const char *str_env;
|
|
char *env_bkp;
|
|
int ret;
|
|
|
|
str_env = getenv("dfu_alt_info");
|
|
if (!str_env) {
|
|
error("\"dfu_alt_info\" env variable not defined!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
env_bkp = strdup(str_env);
|
|
ret = dfu_config_entities(env_bkp, interface, dev);
|
|
if (ret) {
|
|
error("DFU entities configuration failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
free(env_bkp);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned char *dfu_buf;
|
|
static unsigned long dfu_buf_size = CONFIG_SYS_DFU_DATA_BUF_SIZE;
|
|
|
|
static unsigned char *dfu_free_buf(void)
|
|
{
|
|
free(dfu_buf);
|
|
dfu_buf = NULL;
|
|
return dfu_buf;
|
|
}
|
|
|
|
static unsigned char *dfu_get_buf(void)
|
|
{
|
|
char *s;
|
|
|
|
if (dfu_buf != NULL)
|
|
return dfu_buf;
|
|
|
|
s = getenv("dfu_bufsiz");
|
|
dfu_buf_size = s ? (unsigned long)simple_strtol(s, NULL, 16) :
|
|
CONFIG_SYS_DFU_DATA_BUF_SIZE;
|
|
|
|
dfu_buf = memalign(CONFIG_SYS_CACHELINE_SIZE, dfu_buf_size);
|
|
if (dfu_buf == NULL)
|
|
printf("%s: Could not memalign 0x%lx bytes\n",
|
|
__func__, dfu_buf_size);
|
|
|
|
return dfu_buf;
|
|
}
|
|
|
|
static int dfu_write_buffer_drain(struct dfu_entity *dfu)
|
|
{
|
|
long w_size;
|
|
int ret;
|
|
|
|
/* flush size? */
|
|
w_size = dfu->i_buf - dfu->i_buf_start;
|
|
if (w_size == 0)
|
|
return 0;
|
|
|
|
/* update CRC32 */
|
|
dfu->crc = crc32(dfu->crc, dfu->i_buf_start, w_size);
|
|
|
|
ret = dfu->write_medium(dfu, dfu->offset, dfu->i_buf_start, &w_size);
|
|
if (ret)
|
|
debug("%s: Write error!\n", __func__);
|
|
|
|
/* point back */
|
|
dfu->i_buf = dfu->i_buf_start;
|
|
|
|
/* update offset */
|
|
dfu->offset += w_size;
|
|
|
|
puts("#");
|
|
|
|
return ret;
|
|
}
|
|
|
|
int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
|
|
{
|
|
int ret = 0;
|
|
int tret;
|
|
|
|
debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x offset: 0x%llx bufoffset: 0x%x\n",
|
|
__func__, dfu->name, buf, size, blk_seq_num, dfu->offset,
|
|
dfu->i_buf - dfu->i_buf_start);
|
|
|
|
if (!dfu->inited) {
|
|
/* initial state */
|
|
dfu->crc = 0;
|
|
dfu->offset = 0;
|
|
dfu->bad_skip = 0;
|
|
dfu->i_blk_seq_num = 0;
|
|
dfu->i_buf_start = dfu_get_buf();
|
|
if (dfu->i_buf_start == NULL)
|
|
return -ENOMEM;
|
|
dfu->i_buf_end = dfu_get_buf() + dfu_buf_size;
|
|
dfu->i_buf = dfu->i_buf_start;
|
|
|
|
dfu->inited = 1;
|
|
}
|
|
|
|
if (dfu->i_blk_seq_num != blk_seq_num) {
|
|
printf("%s: Wrong sequence number! [%d] [%d]\n",
|
|
__func__, dfu->i_blk_seq_num, blk_seq_num);
|
|
return -1;
|
|
}
|
|
|
|
/* DFU 1.1 standard says:
|
|
* The wBlockNum field is a block sequence number. It increments each
|
|
* time a block is transferred, wrapping to zero from 65,535. It is used
|
|
* to provide useful context to the DFU loader in the device."
|
|
*
|
|
* This means that it's a 16 bit counter that roll-overs at
|
|
* 0xffff -> 0x0000. By having a typical 4K transfer block
|
|
* we roll-over at exactly 256MB. Not very fun to debug.
|
|
*
|
|
* Handling rollover, and having an inited variable,
|
|
* makes things work.
|
|
*/
|
|
|
|
/* handle rollover */
|
|
dfu->i_blk_seq_num = (dfu->i_blk_seq_num + 1) & 0xffff;
|
|
|
|
/* flush buffer if overflow */
|
|
if ((dfu->i_buf + size) > dfu->i_buf_end) {
|
|
tret = dfu_write_buffer_drain(dfu);
|
|
if (ret == 0)
|
|
ret = tret;
|
|
}
|
|
|
|
/* we should be in buffer now (if not then size too large) */
|
|
if ((dfu->i_buf + size) > dfu->i_buf_end) {
|
|
error("Buffer overflow! (0x%p + 0x%x > 0x%p)\n", dfu->i_buf,
|
|
size, dfu->i_buf_end);
|
|
return -1;
|
|
}
|
|
|
|
memcpy(dfu->i_buf, buf, size);
|
|
dfu->i_buf += size;
|
|
|
|
/* if end or if buffer full flush */
|
|
if (size == 0 || (dfu->i_buf + size) > dfu->i_buf_end) {
|
|
tret = dfu_write_buffer_drain(dfu);
|
|
if (ret == 0)
|
|
ret = tret;
|
|
}
|
|
|
|
/* end? */
|
|
if (size == 0) {
|
|
/* Now try and flush to the medium if needed. */
|
|
if (dfu->flush_medium)
|
|
ret = dfu->flush_medium(dfu);
|
|
printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc);
|
|
|
|
/* clear everything */
|
|
dfu_free_buf();
|
|
dfu->crc = 0;
|
|
dfu->offset = 0;
|
|
dfu->i_blk_seq_num = 0;
|
|
dfu->i_buf_start = dfu_buf;
|
|
dfu->i_buf_end = dfu_buf;
|
|
dfu->i_buf = dfu->i_buf_start;
|
|
|
|
dfu->inited = 0;
|
|
|
|
}
|
|
|
|
return ret = 0 ? size : ret;
|
|
}
|
|
|
|
static int dfu_read_buffer_fill(struct dfu_entity *dfu, void *buf, int size)
|
|
{
|
|
long chunk;
|
|
int ret, readn;
|
|
|
|
readn = 0;
|
|
while (size > 0) {
|
|
/* get chunk that can be read */
|
|
chunk = min(size, dfu->b_left);
|
|
/* consume */
|
|
if (chunk > 0) {
|
|
memcpy(buf, dfu->i_buf, chunk);
|
|
dfu->crc = crc32(dfu->crc, buf, chunk);
|
|
dfu->i_buf += chunk;
|
|
dfu->b_left -= chunk;
|
|
size -= chunk;
|
|
buf += chunk;
|
|
readn += chunk;
|
|
}
|
|
|
|
/* all done */
|
|
if (size > 0) {
|
|
/* no more to read */
|
|
if (dfu->r_left == 0)
|
|
break;
|
|
|
|
dfu->i_buf = dfu->i_buf_start;
|
|
dfu->b_left = dfu->i_buf_end - dfu->i_buf_start;
|
|
|
|
/* got to read, but buffer is empty */
|
|
if (dfu->b_left > dfu->r_left)
|
|
dfu->b_left = dfu->r_left;
|
|
ret = dfu->read_medium(dfu, dfu->offset, dfu->i_buf,
|
|
&dfu->b_left);
|
|
if (ret != 0) {
|
|
debug("%s: Read error!\n", __func__);
|
|
return ret;
|
|
}
|
|
dfu->offset += dfu->b_left;
|
|
dfu->r_left -= dfu->b_left;
|
|
|
|
puts("#");
|
|
}
|
|
}
|
|
|
|
return readn;
|
|
}
|
|
|
|
int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
|
|
{
|
|
int ret = 0;
|
|
|
|
debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x i_buf: 0x%p\n",
|
|
__func__, dfu->name, buf, size, blk_seq_num, dfu->i_buf);
|
|
|
|
if (!dfu->inited) {
|
|
dfu->i_buf_start = dfu_get_buf();
|
|
if (dfu->i_buf_start == NULL)
|
|
return -ENOMEM;
|
|
|
|
ret = dfu->read_medium(dfu, 0, dfu->i_buf_start, &dfu->r_left);
|
|
if (ret != 0) {
|
|
debug("%s: failed to get r_left\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
debug("%s: %s %ld [B]\n", __func__, dfu->name, dfu->r_left);
|
|
|
|
dfu->i_blk_seq_num = 0;
|
|
dfu->crc = 0;
|
|
dfu->offset = 0;
|
|
dfu->i_buf_end = dfu_get_buf() + dfu_buf_size;
|
|
dfu->i_buf = dfu->i_buf_start;
|
|
dfu->b_left = 0;
|
|
|
|
dfu->bad_skip = 0;
|
|
|
|
dfu->inited = 1;
|
|
}
|
|
|
|
if (dfu->i_blk_seq_num != blk_seq_num) {
|
|
printf("%s: Wrong sequence number! [%d] [%d]\n",
|
|
__func__, dfu->i_blk_seq_num, blk_seq_num);
|
|
return -1;
|
|
}
|
|
/* handle rollover */
|
|
dfu->i_blk_seq_num = (dfu->i_blk_seq_num + 1) & 0xffff;
|
|
|
|
ret = dfu_read_buffer_fill(dfu, buf, size);
|
|
if (ret < 0) {
|
|
printf("%s: Failed to fill buffer\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
if (ret < size) {
|
|
debug("%s: %s CRC32: 0x%x\n", __func__, dfu->name, dfu->crc);
|
|
puts("\nUPLOAD ... done\nCtrl+C to exit ...\n");
|
|
|
|
dfu_free_buf();
|
|
dfu->i_blk_seq_num = 0;
|
|
dfu->crc = 0;
|
|
dfu->offset = 0;
|
|
dfu->i_buf_start = dfu_buf;
|
|
dfu->i_buf_end = dfu_buf;
|
|
dfu->i_buf = dfu->i_buf_start;
|
|
dfu->b_left = 0;
|
|
|
|
dfu->bad_skip = 0;
|
|
|
|
dfu->inited = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt,
|
|
char *interface, int num)
|
|
{
|
|
char *st;
|
|
|
|
debug("%s: %s interface: %s num: %d\n", __func__, s, interface, num);
|
|
st = strsep(&s, " ");
|
|
strcpy(dfu->name, st);
|
|
|
|
dfu->dev_num = num;
|
|
dfu->alt = alt;
|
|
|
|
/* Specific for mmc device */
|
|
if (strcmp(interface, "mmc") == 0) {
|
|
if (dfu_fill_entity_mmc(dfu, s))
|
|
return -1;
|
|
} else if (strcmp(interface, "nand") == 0) {
|
|
if (dfu_fill_entity_nand(dfu, s))
|
|
return -1;
|
|
} else if (strcmp(interface, "ram") == 0) {
|
|
if (dfu_fill_entity_ram(dfu, s))
|
|
return -1;
|
|
} else {
|
|
printf("%s: Device %s not (yet) supported!\n",
|
|
__func__, interface);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void dfu_free_entities(void)
|
|
{
|
|
struct dfu_entity *dfu, *p, *t = NULL;
|
|
|
|
list_for_each_entry_safe_reverse(dfu, p, &dfu_list, list) {
|
|
list_del(&dfu->list);
|
|
t = dfu;
|
|
}
|
|
if (t)
|
|
free(t);
|
|
INIT_LIST_HEAD(&dfu_list);
|
|
}
|
|
|
|
int dfu_config_entities(char *env, char *interface, int num)
|
|
{
|
|
struct dfu_entity *dfu;
|
|
int i, ret;
|
|
char *s;
|
|
|
|
dfu_alt_num = dfu_find_alt_num(env);
|
|
debug("%s: dfu_alt_num=%d\n", __func__, dfu_alt_num);
|
|
|
|
dfu = calloc(sizeof(*dfu), dfu_alt_num);
|
|
if (!dfu)
|
|
return -1;
|
|
for (i = 0; i < dfu_alt_num; i++) {
|
|
|
|
s = strsep(&env, ";");
|
|
ret = dfu_fill_entity(&dfu[i], s, i, interface, num);
|
|
if (ret)
|
|
return -1;
|
|
|
|
list_add_tail(&dfu[i].list, &dfu_list);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
const char *dfu_get_dev_type(enum dfu_device_type t)
|
|
{
|
|
const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND", "RAM" };
|
|
return dev_t[t];
|
|
}
|
|
|
|
const char *dfu_get_layout(enum dfu_layout l)
|
|
{
|
|
const char *dfu_layout[] = {NULL, "RAW_ADDR", "FAT", "EXT2",
|
|
"EXT3", "EXT4", "RAM_ADDR" };
|
|
return dfu_layout[l];
|
|
}
|
|
|
|
void dfu_show_entities(void)
|
|
{
|
|
struct dfu_entity *dfu;
|
|
|
|
puts("DFU alt settings list:\n");
|
|
|
|
list_for_each_entry(dfu, &dfu_list, list) {
|
|
printf("dev: %s alt: %d name: %s layout: %s\n",
|
|
dfu_get_dev_type(dfu->dev_type), dfu->alt,
|
|
dfu->name, dfu_get_layout(dfu->layout));
|
|
}
|
|
}
|
|
|
|
int dfu_get_alt_number(void)
|
|
{
|
|
return dfu_alt_num;
|
|
}
|
|
|
|
struct dfu_entity *dfu_get_entity(int alt)
|
|
{
|
|
struct dfu_entity *dfu;
|
|
|
|
list_for_each_entry(dfu, &dfu_list, list) {
|
|
if (dfu->alt == alt)
|
|
return dfu;
|
|
}
|
|
|
|
return NULL;
|
|
}
|