mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
f588b4d205
Now that we have added driver model support to the TSEC driver, convert ls1021atwr board to use it. This depends on previous DM series for ls1021atwr: http://patchwork.ozlabs.org/patch/561855/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> [Vladimir] Made the following changes: - Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi - Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 - a mistake ported over from Linux. Each SGMII PCS lies on the private MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS). - Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs - Completely removed non-DM_ETH support from ls1021atwr - Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio" and from "fsl,tsec" to "fsl,etsec2" to match Linux
439 lines
11 KiB
Text
439 lines
11 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Freescale ls1021a SOC common device tree source
|
|
*
|
|
* Copyright 2013-2015 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
compatible = "fsl,ls1021a";
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
serial0 = &lpuart0;
|
|
serial1 = &lpuart1;
|
|
serial2 = &lpuart2;
|
|
serial3 = &lpuart3;
|
|
serial4 = &lpuart4;
|
|
serial5 = &lpuart5;
|
|
sysclk = &sysclk;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@f00 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0xf00>;
|
|
clocks = <&cluster1_clk>;
|
|
};
|
|
|
|
cpu@f01 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0xf01>;
|
|
clocks = <&cluster1_clk>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
interrupt-parent = <&gic>;
|
|
ranges;
|
|
|
|
gic: interrupt-controller@1400000 {
|
|
compatible = "arm,cortex-a7-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x1401000 0x1000>,
|
|
<0x1402000 0x1000>,
|
|
<0x1404000 0x2000>,
|
|
<0x1406000 0x2000>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
|
|
};
|
|
|
|
ifc: ifc@1530000 {
|
|
compatible = "fsl,ifc", "simple-bus";
|
|
reg = <0x1530000 0x10000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
dcfg: dcfg@1ee0000 {
|
|
compatible = "fsl,ls1021a-dcfg", "syscon";
|
|
reg = <0x1ee0000 0x10000>;
|
|
big-endian;
|
|
};
|
|
|
|
esdhc: esdhc@1560000 {
|
|
compatible = "fsl,esdhc";
|
|
reg = <0x1560000 0x10000>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <0>;
|
|
voltage-ranges = <1800 1800 3300 3300>;
|
|
sdhci,auto-cmd12;
|
|
big-endian;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
scfg: scfg@1570000 {
|
|
compatible = "fsl,ls1021a-scfg", "syscon";
|
|
reg = <0x1570000 0x10000>;
|
|
big-endian;
|
|
};
|
|
|
|
clockgen: clocking@1ee1000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x1ee1000 0x10000>;
|
|
|
|
sysclk: sysclk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-output-names = "sysclk";
|
|
};
|
|
|
|
cga_pll1: pll@800 {
|
|
compatible = "fsl,qoriq-core-pll-2.0";
|
|
#clock-cells = <1>;
|
|
reg = <0x800 0x10>;
|
|
clocks = <&sysclk>;
|
|
clock-output-names = "cga-pll1", "cga-pll1-div2",
|
|
"cga-pll1-div4";
|
|
};
|
|
|
|
platform_clk: pll@c00 {
|
|
compatible = "fsl,qoriq-core-pll-2.0";
|
|
#clock-cells = <1>;
|
|
reg = <0xc00 0x10>;
|
|
clocks = <&sysclk>;
|
|
clock-output-names = "platform-clk", "platform-clk-div2";
|
|
};
|
|
|
|
cluster1_clk: clk0c0@0 {
|
|
compatible = "fsl,qoriq-core-mux-2.0";
|
|
#clock-cells = <0>;
|
|
reg = <0x0 0x10>;
|
|
clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
|
|
clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
|
|
clock-output-names = "cluster1-clk";
|
|
};
|
|
};
|
|
|
|
dspi0: dspi@2100000 {
|
|
compatible = "fsl,vf610-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2100000 0x10000>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&platform_clk 1>;
|
|
num-cs = <6>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi1: dspi@2110000 {
|
|
compatible = "fsl,vf610-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2110000 0x10000>;
|
|
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&platform_clk 1>;
|
|
num-cs = <6>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
qspi: quadspi@1550000 {
|
|
compatible = "fsl,vf610-qspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x1550000 0x10000>,
|
|
<0x40000000 0x4000000>;
|
|
reg-names = "QuadSPI", "QuadSPI-memory";
|
|
num-cs = <2>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@2180000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2180000 0x10000>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&platform_clk 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@2190000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2190000 0x10000>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&platform_clk 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@21a0000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x21a0000 0x10000>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&platform_clk 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@21c0500 {
|
|
compatible = "fsl,16550-FIFO64", "ns16550a";
|
|
reg = <0x21c0500 0x100>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
fifo-size = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@21c0600 {
|
|
compatible = "fsl,16550-FIFO64", "ns16550a";
|
|
reg = <0x21c0600 0x100>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
fifo-size = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@21d0500 {
|
|
compatible = "fsl,16550-FIFO64", "ns16550a";
|
|
reg = <0x21d0500 0x100>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
fifo-size = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@21d0600 {
|
|
compatible = "fsl,16550-FIFO64", "ns16550a";
|
|
reg = <0x21d0600 0x100>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
fifo-size = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart0: serial@2950000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x2950000 0x1000>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart1: serial@2960000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x2960000 0x1000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&platform_clk 1>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart2: serial@2970000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x2970000 0x1000>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&platform_clk 1>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart3: serial@2980000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x2980000 0x1000>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&platform_clk 1>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart4: serial@2990000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x2990000 0x1000>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&platform_clk 1>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart5: serial@29a0000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x29a0000 0x1000>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&platform_clk 1>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog0: watchdog@2ad0000 {
|
|
compatible = "fsl,imx21-wdt";
|
|
reg = <0x2ad0000 0x10000>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&platform_clk 1>;
|
|
clock-names = "wdog-en";
|
|
big-endian;
|
|
};
|
|
|
|
sai1: sai@2b50000 {
|
|
compatible = "fsl,vf610-sai";
|
|
reg = <0x2b50000 0x10000>;
|
|
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&platform_clk 1>;
|
|
clock-names = "sai";
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 47>,
|
|
<&edma0 1 46>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai2: sai@2b60000 {
|
|
compatible = "fsl,vf610-sai";
|
|
reg = <0x2b60000 0x10000>;
|
|
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&platform_clk 1>;
|
|
clock-names = "sai";
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 45>,
|
|
<&edma0 1 44>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
edma0: edma@2c00000 {
|
|
#dma-cells = <2>;
|
|
compatible = "fsl,vf610-edma";
|
|
reg = <0x2c00000 0x10000>,
|
|
<0x2c10000 0x10000>,
|
|
<0x2c20000 0x10000>;
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma-tx", "edma-err";
|
|
dma-channels = <32>;
|
|
big-endian;
|
|
clock-names = "dmamux0", "dmamux1";
|
|
clocks = <&platform_clk 1>,
|
|
<&platform_clk 1>;
|
|
};
|
|
|
|
enet0: ethernet@2d10000 {
|
|
compatible = "fsl,etsec2";
|
|
reg = <0x2d10000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
enet1: ethernet@2d50000 {
|
|
compatible = "fsl,etsec2";
|
|
reg = <0x2d50000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
enet2: ethernet@2d90000 {
|
|
compatible = "fsl,etsec2";
|
|
reg = <0x2d90000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio0: mdio@2d24000 {
|
|
compatible = "fsl,etsec2-mdio";
|
|
reg = <0x2d24000 0x4000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mdio1: mdio@2d64000 {
|
|
compatible = "fsl,etsec2-mdio";
|
|
reg = <0x2d64000 0x4000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
usb@8600000 {
|
|
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
|
|
reg = <0x8600000 0x1000>;
|
|
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
usb3@3100000 {
|
|
compatible = "fsl,layerscape-dwc3";
|
|
reg = <0x3100000 0x10000>;
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
};
|
|
|
|
pcie@3400000 {
|
|
compatible = "fsl,ls-pcie", "snps,dw-pcie";
|
|
reg = <0x03400000 0x20000 /* dbi registers */
|
|
0x01570000 0x10000 /* pf controls registers */
|
|
0x24000000 0x20000>; /* configuration space */
|
|
reg-names = "dbi", "ctrl", "config";
|
|
big-endian;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x24020000 0x0 0x00010000 /* downstream I/O */
|
|
0x82000000 0x0 0x28000000 0x28000000 0x0 0x08000000>; /* non-prefetchable memory */
|
|
};
|
|
|
|
pcie@3500000 {
|
|
compatible = "fsl,ls-pcie", "snps,dw-pcie";
|
|
reg = <0x03500000 0x10000 /* dbi registers */
|
|
0x01570000 0x10000 /* pf controls registers */
|
|
0x34000000 0x20000>; /* configuration space */
|
|
reg-names = "dbi", "ctrl", "config";
|
|
big-endian;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
num-lanes = <2>;
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x34020000 0x0 0x00010000 /* downstream I/O */
|
|
0x82000000 0x0 0x38000000 0x38000000 0x0 0x08000000>; /* non-prefetchable memory */
|
|
};
|
|
|
|
sata: sata@3200000 {
|
|
compatible = "fsl,ls1021a-ahci";
|
|
reg = <0x3200000 0x10000 0x20220520 0x4>;
|
|
reg-names = "sata-base", "ecc-addr";
|
|
interrupts = <0 101 4>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|