mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
5ccd29c367
This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
326 lines
8.1 KiB
C
326 lines
8.1 KiB
C
/*
|
|
* Copyright 2008-2009 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <ioports.h>
|
|
#include <lmb.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/fsl_law.h>
|
|
#include "mp.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
u32 get_my_id()
|
|
{
|
|
return mfspr(SPRN_PIR);
|
|
}
|
|
|
|
int cpu_reset(int nr)
|
|
{
|
|
volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
|
|
out_be32(&pic->pir, 1 << nr);
|
|
/* the dummy read works around an errata on early 85xx MP PICs */
|
|
(void)in_be32(&pic->pir);
|
|
out_be32(&pic->pir, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int cpu_status(int nr)
|
|
{
|
|
u32 *table, id = get_my_id();
|
|
|
|
if (nr == id) {
|
|
table = (u32 *)get_spin_virt_addr();
|
|
printf("table base @ 0x%p\n", table);
|
|
} else {
|
|
table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
|
|
printf("Running on cpu %d\n", id);
|
|
printf("\n");
|
|
printf("table @ 0x%p\n", table);
|
|
printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
|
|
printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
|
|
printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
|
|
printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 boot_entry_map[4] = {
|
|
0,
|
|
BOOT_ENTRY_PIR,
|
|
BOOT_ENTRY_R3_LOWER,
|
|
BOOT_ENTRY_R6_LOWER,
|
|
};
|
|
|
|
int cpu_release(int nr, int argc, char *argv[])
|
|
{
|
|
u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
|
|
u64 boot_addr;
|
|
|
|
if (nr == get_my_id()) {
|
|
printf("Invalid to release the boot core.\n\n");
|
|
return 1;
|
|
}
|
|
|
|
if (argc != 4) {
|
|
printf("Invalid number of arguments to release.\n\n");
|
|
return 1;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_64BIT_STRTOUL
|
|
boot_addr = simple_strtoull(argv[0], NULL, 16);
|
|
#else
|
|
boot_addr = simple_strtoul(argv[0], NULL, 16);
|
|
#endif
|
|
|
|
/* handle pir, r3, r6 */
|
|
for (i = 1; i < 4; i++) {
|
|
if (argv[i][0] != '-') {
|
|
u8 entry = boot_entry_map[i];
|
|
val = simple_strtoul(argv[i], NULL, 16);
|
|
table[entry] = val;
|
|
}
|
|
}
|
|
|
|
table[BOOT_ENTRY_ADDR_UPPER] = (u32)(boot_addr >> 32);
|
|
|
|
/* ensure all table updates complete before final address write */
|
|
eieio();
|
|
|
|
table[BOOT_ENTRY_ADDR_LOWER] = (u32)(boot_addr & 0xffffffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 determine_mp_bootpg(void)
|
|
{
|
|
/* if we have 4G or more of memory, put the boot page at 4Gb-4k */
|
|
if ((u64)gd->ram_size > 0xfffff000)
|
|
return (0xfffff000);
|
|
|
|
return (gd->ram_size - 4096);
|
|
}
|
|
|
|
ulong get_spin_phys_addr(void)
|
|
{
|
|
extern ulong __secondary_start_page;
|
|
extern ulong __spin_table;
|
|
|
|
return (determine_mp_bootpg() +
|
|
(ulong)&__spin_table - (ulong)&__secondary_start_page);
|
|
}
|
|
|
|
ulong get_spin_virt_addr(void)
|
|
{
|
|
extern ulong __secondary_start_page;
|
|
extern ulong __spin_table;
|
|
|
|
return (CONFIG_BPTR_VIRT_ADDR +
|
|
(ulong)&__spin_table - (ulong)&__secondary_start_page);
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
static void plat_mp_up(unsigned long bootpg)
|
|
{
|
|
u32 up, cpu_up_mask, whoami;
|
|
u32 *table = (u32 *)get_spin_virt_addr();
|
|
volatile ccsr_gur_t *gur;
|
|
volatile ccsr_local_t *ccm;
|
|
volatile ccsr_rcpm_t *rcpm;
|
|
volatile ccsr_pic_t *pic;
|
|
int timeout = 10;
|
|
u32 nr_cpus;
|
|
struct law_entry e;
|
|
|
|
gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR);
|
|
rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
|
|
pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
|
|
|
|
nr_cpus = ((in_be32(&pic->frr) >> 8) & 0xff) + 1;
|
|
|
|
whoami = in_be32(&pic->whoami);
|
|
cpu_up_mask = 1 << whoami;
|
|
out_be32(&ccm->bstrl, bootpg);
|
|
|
|
e = find_law(bootpg);
|
|
out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
|
|
|
|
/* disable time base at the platform */
|
|
out_be32(&rcpm->ctbenrl, cpu_up_mask);
|
|
|
|
/* release the hounds */
|
|
up = ((1 << nr_cpus) - 1);
|
|
out_be32(&gur->brrl, up);
|
|
|
|
/* wait for everyone */
|
|
while (timeout) {
|
|
int i;
|
|
for (i = 0; i < nr_cpus; i++) {
|
|
if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
|
|
cpu_up_mask |= (1 << i);
|
|
};
|
|
|
|
if ((cpu_up_mask & up) == up)
|
|
break;
|
|
|
|
udelay(100);
|
|
timeout--;
|
|
}
|
|
|
|
if (timeout == 0)
|
|
printf("CPU up timeout. CPU up mask is %x should be %x\n",
|
|
cpu_up_mask, up);
|
|
|
|
/* enable time base at the platform */
|
|
out_be32(&rcpm->ctbenrl, 0);
|
|
mtspr(SPRN_TBWU, 0);
|
|
mtspr(SPRN_TBWL, 0);
|
|
out_be32(&rcpm->ctbenrl, (1 << nr_cpus) - 1);
|
|
|
|
#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
|
|
/*
|
|
* Disabling Boot Page Translation allows the memory region 0xfffff000
|
|
* to 0xffffffff to be used normally. Leaving Boot Page Translation
|
|
* enabled remaps 0xfffff000 to SDRAM which makes that memory region
|
|
* unusable for normal operation but it does allow OSes to easily
|
|
* reset a processor core to put it back into U-Boot's spinloop.
|
|
*/
|
|
clrbits_be32(&ecm->bptr, 0x80000000);
|
|
#endif
|
|
}
|
|
#else
|
|
static void plat_mp_up(unsigned long bootpg)
|
|
{
|
|
u32 up, cpu_up_mask, whoami;
|
|
u32 *table = (u32 *)get_spin_virt_addr();
|
|
volatile u32 bpcr;
|
|
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
|
|
u32 devdisr;
|
|
int timeout = 10;
|
|
|
|
whoami = in_be32(&pic->whoami);
|
|
out_be32(&ecm->bptr, 0x80000000 | (bootpg >> 12));
|
|
|
|
/* disable time base at the platform */
|
|
devdisr = in_be32(&gur->devdisr);
|
|
if (whoami)
|
|
devdisr |= MPC85xx_DEVDISR_TB0;
|
|
else
|
|
devdisr |= MPC85xx_DEVDISR_TB1;
|
|
out_be32(&gur->devdisr, devdisr);
|
|
|
|
/* release the hounds */
|
|
up = ((1 << cpu_numcores()) - 1);
|
|
bpcr = in_be32(&ecm->eebpcr);
|
|
bpcr |= (up << 24);
|
|
out_be32(&ecm->eebpcr, bpcr);
|
|
asm("sync; isync; msync");
|
|
|
|
cpu_up_mask = 1 << whoami;
|
|
/* wait for everyone */
|
|
while (timeout) {
|
|
int i;
|
|
for (i = 0; i < cpu_numcores(); i++) {
|
|
if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
|
|
cpu_up_mask |= (1 << i);
|
|
};
|
|
|
|
if ((cpu_up_mask & up) == up)
|
|
break;
|
|
|
|
udelay(100);
|
|
timeout--;
|
|
}
|
|
|
|
if (timeout == 0)
|
|
printf("CPU up timeout. CPU up mask is %x should be %x\n",
|
|
cpu_up_mask, up);
|
|
|
|
/* enable time base at the platform */
|
|
if (whoami)
|
|
devdisr |= MPC85xx_DEVDISR_TB1;
|
|
else
|
|
devdisr |= MPC85xx_DEVDISR_TB0;
|
|
out_be32(&gur->devdisr, devdisr);
|
|
mtspr(SPRN_TBWU, 0);
|
|
mtspr(SPRN_TBWL, 0);
|
|
|
|
devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1);
|
|
out_be32(&gur->devdisr, devdisr);
|
|
|
|
#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
|
|
/*
|
|
* Disabling Boot Page Translation allows the memory region 0xfffff000
|
|
* to 0xffffffff to be used normally. Leaving Boot Page Translation
|
|
* enabled remaps 0xfffff000 to SDRAM which makes that memory region
|
|
* unusable for normal operation but it does allow OSes to easily
|
|
* reset a processor core to put it back into U-Boot's spinloop.
|
|
*/
|
|
clrbits_be32(&ecm->bptr, 0x80000000);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
void cpu_mp_lmb_reserve(struct lmb *lmb)
|
|
{
|
|
u32 bootpg = determine_mp_bootpg();
|
|
|
|
lmb_reserve(lmb, bootpg, 4096);
|
|
}
|
|
|
|
void setup_mp(void)
|
|
{
|
|
extern ulong __secondary_start_page;
|
|
extern ulong __bootpg_addr;
|
|
ulong fixup = (ulong)&__secondary_start_page;
|
|
u32 bootpg = determine_mp_bootpg();
|
|
|
|
/* Store the bootpg's SDRAM address for use by secondary CPU cores */
|
|
__bootpg_addr = bootpg;
|
|
|
|
/* look for the tlb covering the reset page, there better be one */
|
|
int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
|
|
|
|
/* we found a match */
|
|
if (i != -1) {
|
|
/* map reset page to bootpg so we can copy code there */
|
|
disable_tlb(i);
|
|
|
|
set_tlb(1, CONFIG_BPTR_VIRT_ADDR, bootpg, /* tlb, epn, rpn */
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, /* perms, wimge */
|
|
0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */
|
|
|
|
memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
|
|
|
|
plat_mp_up(bootpg);
|
|
} else {
|
|
puts("WARNING: No reset page TLB. "
|
|
"Skipping secondary core setup\n");
|
|
}
|
|
}
|