u-boot/include/configs/xilinx_zynqmp_zcu102.h
Michal Simek b72894f14d ARM64: zynqmp: Add support for standard distro boot commands
Nand and QSPI are not defined now but this will be extended.
Based on selected bootmode boot_targets are rewritten.
Patch also contains detection if variables are saved. If yes don't
rewrite boot_targets variable.

Also move variable setup to the end of file because SCSI needs to be
defined before others macros are using it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2016-06-06 11:23:28 +02:00

58 lines
1.6 KiB
C

/*
* Configuration for Xilinx ZynqMP zcu102
*
* (C) Copyright 2015 Xilinx, Inc.
* Michal Simek <michal.simek@xilinx.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_ZYNQMP_ZCU102_H
#define __CONFIG_ZYNQMP_ZCU102_H
#define CONFIG_ZYNQ_SDHCI1
#define CONFIG_ZYNQ_I2C0
#define CONFIG_ZYNQ_I2C1
#define CONFIG_SYS_I2C_MAX_HOPS 1
#define CONFIG_SYS_NUM_I2C_BUSES 18
#define CONFIG_SYS_I2C_BUSES { \
{0, {I2C_NULL_HOP} }, \
{0, {{I2C_MUX_PCA9544, 0x75, 0} } }, \
{0, {{I2C_MUX_PCA9544, 0x75, 1} } }, \
{0, {{I2C_MUX_PCA9544, 0x75, 2} } }, \
{1, {I2C_NULL_HOP} }, \
{1, {{I2C_MUX_PCA9548, 0x74, 0} } }, \
{1, {{I2C_MUX_PCA9548, 0x74, 1} } }, \
{1, {{I2C_MUX_PCA9548, 0x74, 2} } }, \
{1, {{I2C_MUX_PCA9548, 0x74, 3} } }, \
{1, {{I2C_MUX_PCA9548, 0x74, 4} } }, \
{1, {{I2C_MUX_PCA9548, 0x75, 0} } }, \
{1, {{I2C_MUX_PCA9548, 0x75, 1} } }, \
{1, {{I2C_MUX_PCA9548, 0x75, 2} } }, \
{1, {{I2C_MUX_PCA9548, 0x75, 3} } }, \
{1, {{I2C_MUX_PCA9548, 0x75, 4} } }, \
{1, {{I2C_MUX_PCA9548, 0x75, 5} } }, \
{1, {{I2C_MUX_PCA9548, 0x75, 6} } }, \
{1, {{I2C_MUX_PCA9548, 0x75, 7} } }, \
}
#define CONFIG_SYS_I2C_ZYNQ
#define CONFIG_PCA953X
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_SATA_CEVA
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR}
#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZCU102"
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_CMD_EEPROM
#define CONFIG_ZYNQ_EEPROM_BUS 5
#define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x54
#define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0x20
#include <configs/xilinx_zynqmp.h>
#endif /* __CONFIG_ZYNQMP_ZCU102_H */