u-boot/include/configs/k2g_evm.h
Lokesh Vutla 5c2728ff0f configs: k2*_evm: Update fdt file names
Now that all Keystone2 dts file names are changed in Linux kernel, reflect the
same in evn variables inorder to find the right dtb file.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-06 13:39:18 -04:00

76 lines
2.1 KiB
C

/*
* Configuration header file for TI's k2g-evm
*
* (C) Copyright 2015
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_K2G_EVM_H
#define __CONFIG_K2G_EVM_H
/* Platform type */
#define CONFIG_SOC_K2G
#define CONFIG_K2G_EVM
/* U-Boot general configuration */
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_MMC_TI_ARGS \
DEFAULT_PMMC_BOOT_ENV \
"boot=mmc\0" \
"console=ttyS0,115200n8\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"rd_spec=-\0" \
"addr_mon=0x0c040000\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
"name_fdt=keystone-k2g-evm.dtb\0" \
"name_mon=skern-k2g.bin\0" \
"name_ubi=k2g-evm-ubifs.ubi\0" \
"name_uboot=u-boot-spi-k2g-evm.gph\0" \
"init_mmc=run args_all args_mmc\0" \
"soc_variant=k2g\0" \
"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0"\
"get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
"${bootdir}/${name_kern}\0" \
"get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\
"name_fs=arago-base-tisdk-image-k2g-evm.cpio\0"
#define CONFIG_BOOTCOMMAND \
"run envboot; " \
"run set_name_pmmc init_${boot} get_pmmc_${boot} run_pmmc " \
"get_fdt_${boot} get_mon_${boot} get_kern_${boot} " \
"run_mon run_kern"
#include <configs/ti_armv7_keystone2.h>
/* SPL SPI Loader Configuration */
#define CONFIG_SPL_TEXT_BASE 0x0c080000
/* NAND Configuration */
#define CONFIG_SYS_NAND_PAGE_2K
/* Network */
#define CONFIG_KSNET_NETCP_V1_5
#define CONFIG_KSNET_CPSW_NUM_PORTS 2
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
#define CONFIG_PHY_MICREL
#define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */
/* MMC/SD */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_OMAP_HSMMC
#undef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0:1"
#define FAT_ENV_FILE "uboot.env"
#define CONFIG_SF_DEFAULT_BUS 1
#define CONFIG_SF_DEFAULT_CS 0
#endif /* __CONFIG_K2G_EVM_H */