mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 17:10:11 +00:00
afdfcb11f9
Renesas RZ/N1 devices contain BootROM code that loads a custom SPKG image from QSPI, NAND or USB DFU. Support this format in mkimage tool. SPKGs can optionally be signed, however creation of signed SPKG is not currently supported. Example of how to use it: tools/mkimage -n board/schneider/rzn1-snarc/spkgimage.cfg \ -T spkgimage -a 0x20040000 -e 0x20040000 \ -d u-boot.bin u-boot.bin.spkg The config file (spkgimage.cfg in this example) contains additional parameters such as NAND ECC settings. Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
336 lines
8.9 KiB
C
336 lines
8.9 KiB
C
// SPDX-License-Identifier: BSD-2-Clause
|
|
/*
|
|
* Generate Renesas RZ/N1 BootROM header (SPKG)
|
|
* (C) Copyright 2022 Schneider Electric
|
|
*
|
|
* Based on spkg_utility.c
|
|
* (C) Copyright 2016 Renesas Electronics Europe Ltd
|
|
*/
|
|
|
|
#include "imagetool.h"
|
|
#include <limits.h>
|
|
#include <image.h>
|
|
#include <stdarg.h>
|
|
#include <stdint.h>
|
|
#include <u-boot/crc.h>
|
|
#include "renesas_spkgimage.h"
|
|
|
|
/* Note: the ordering of the bitfields does not matter */
|
|
struct config_file {
|
|
unsigned int version:1;
|
|
unsigned int ecc_block_size:2;
|
|
unsigned int ecc_enable:1;
|
|
unsigned int ecc_scheme:3;
|
|
unsigned int ecc_bytes:8;
|
|
unsigned int blp_len;
|
|
unsigned int padding;
|
|
};
|
|
|
|
static struct config_file conf;
|
|
|
|
static int check_range(const char *name, int val, int min, int max)
|
|
{
|
|
if (val < min) {
|
|
fprintf(stderr, "Warning: param '%s' adjusted to min %d\n",
|
|
name, min);
|
|
val = min;
|
|
}
|
|
|
|
if (val > max) {
|
|
fprintf(stderr, "Warning: param '%s' adjusted to max %d\n",
|
|
name, max);
|
|
val = max;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static int spkgimage_parse_config_line(char *line, size_t line_num)
|
|
{
|
|
char *saveptr;
|
|
char *delim = "\t ";
|
|
char *name = strtok_r(line, delim, &saveptr);
|
|
char *val_str = strtok_r(NULL, delim, &saveptr);
|
|
int value = atoi(val_str);
|
|
|
|
if (!strcmp("VERSION", name)) {
|
|
conf.version = check_range(name, value, 1, 15);
|
|
} else if (!strcmp("NAND_ECC_ENABLE", name)) {
|
|
conf.ecc_enable = check_range(name, value, 0, 1);
|
|
} else if (!strcmp("NAND_ECC_BLOCK_SIZE", name)) {
|
|
conf.ecc_block_size = check_range(name, value, 0, 2);
|
|
} else if (!strcmp("NAND_ECC_SCHEME", name)) {
|
|
conf.ecc_scheme = check_range(name, value, 0, 7);
|
|
} else if (!strcmp("NAND_BYTES_PER_ECC_BLOCK", name)) {
|
|
conf.ecc_bytes = check_range(name, value, 0, 255);
|
|
} else if (!strcmp("ADD_DUMMY_BLP", name)) {
|
|
conf.blp_len = value ? SPKG_BLP_SIZE : 0;
|
|
} else if (!strcmp("PADDING", name)) {
|
|
if (strrchr(val_str, 'K'))
|
|
value = value * 1024;
|
|
else if (strrchr(val_str, 'M'))
|
|
value = value * 1024 * 1024;
|
|
conf.padding = check_range(name, value, 1, INT_MAX);
|
|
} else {
|
|
fprintf(stderr,
|
|
"config error: unknown keyword on line %ld\n",
|
|
line_num);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spkgimage_parse_config_file(char *filename)
|
|
{
|
|
FILE *fcfg;
|
|
char line[256];
|
|
size_t line_num = 0;
|
|
|
|
fcfg = fopen(filename, "r");
|
|
if (!fcfg)
|
|
return -EINVAL;
|
|
|
|
while (fgets(line, sizeof(line), fcfg)) {
|
|
line_num += 1;
|
|
|
|
/* Skip blank lines and comments */
|
|
if (line[0] == '\n' || line[0] == '#')
|
|
continue;
|
|
|
|
/* Strip any trailing newline */
|
|
line[strcspn(line, "\n")] = 0;
|
|
|
|
/* Parse the line */
|
|
if (spkgimage_parse_config_line(line, line_num))
|
|
return -EINVAL;
|
|
}
|
|
|
|
fclose(fcfg);
|
|
|
|
/* Avoid divide-by-zero later on */
|
|
if (!conf.padding)
|
|
conf.padding = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spkgimage_check_params(struct image_tool_params *params)
|
|
{
|
|
if (!params->addr) {
|
|
fprintf(stderr, "Error: Load Address must be set.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!params->imagename || !params->imagename[0]) {
|
|
fprintf(stderr, "Error: Image name must be set.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!params->datafile) {
|
|
fprintf(stderr, "Error: Data filename must be set.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spkgimage_verify_header(unsigned char *ptr, int size,
|
|
struct image_tool_params *param)
|
|
{
|
|
struct spkg_file *file = (struct spkg_file *)ptr;
|
|
struct spkg_hdr *header = (struct spkg_hdr *)ptr;
|
|
char marker[4] = SPKG_HEADER_MARKER;
|
|
uint32_t payload_length;
|
|
uint32_t crc;
|
|
uint8_t *crc_buf;
|
|
|
|
/* Check the marker bytes */
|
|
if (memcmp(header->marker, marker, 4)) {
|
|
fprintf(stderr, "Error: invalid marker bytes\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check the CRC */
|
|
crc = crc32(0, ptr, SPKG_HEADER_SIZE - SPKG_CRC_SIZE);
|
|
if (crc != header->crc) {
|
|
fprintf(stderr, "Error: invalid header CRC=\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check all copies of header are the same */
|
|
for (int i = 1; i < SPKG_HEADER_COUNT; i++) {
|
|
if (memcmp(&header[0], &header[i], SPKG_HEADER_SIZE)) {
|
|
fprintf(stderr, "Error: header %d mismatch\n", i);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Check the payload CRC */
|
|
payload_length = le32_to_cpu(header->payload_length) >> 8;
|
|
crc_buf = file->payload + payload_length - SPKG_CRC_SIZE;
|
|
crc = crc32(0, file->payload, payload_length - SPKG_CRC_SIZE);
|
|
if (crc_buf[0] != (crc & 0xff) ||
|
|
crc_buf[1] != (crc >> 8 & 0xff) ||
|
|
crc_buf[2] != (crc >> 16 & 0xff) ||
|
|
crc_buf[3] != (crc >> 24 & 0xff)) {
|
|
fprintf(stderr, "Error: invalid payload CRC\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spkgimage_print_header(const void *ptr,
|
|
struct image_tool_params *image)
|
|
{
|
|
const struct spkg_hdr *h = ptr;
|
|
uint32_t offset = le32_to_cpu(h->execution_offset);
|
|
|
|
printf("Image type\t: Renesas SPKG Image\n");
|
|
printf("Marker\t\t: %c%c%c%c\n",
|
|
h->marker[0], h->marker[1], h->marker[2], h->marker[3]);
|
|
printf("Version\t\t: %d\n", h->version);
|
|
printf("ECC\t\t: ");
|
|
if (h->ecc & 0x20)
|
|
printf("Scheme %d, Block size %d, Strength %d\n",
|
|
h->ecc_scheme, (h->ecc >> 1) & 3, h->ecc_bytes);
|
|
else
|
|
printf("Not enabled\n");
|
|
printf("Payload length\t: %d\n", le32_to_cpu(h->payload_length) >> 8);
|
|
printf("Load address\t: 0x%08x\n", le32_to_cpu(h->load_address));
|
|
printf("Execution offset: 0x%08x (%s mode)\n", offset & ~1,
|
|
offset & 1 ? "THUMB" : "ARM");
|
|
printf("Header checksum\t: 0x%08x\n", le32_to_cpu(h->crc));
|
|
}
|
|
|
|
/*
|
|
* This is the same as the macro version in include/kernel.h.
|
|
* However we cannot include that header, because for host tools,
|
|
* it ends up pulling in the host /usr/include/linux/kernel.h,
|
|
* which lacks the definition of roundup().
|
|
*/
|
|
static inline uint32_t roundup(uint32_t x, uint32_t y)
|
|
{
|
|
return ((x + y - 1) / y) * y;
|
|
}
|
|
|
|
static int spkgimage_vrec_header(struct image_tool_params *params,
|
|
struct image_type_params *tparams)
|
|
{
|
|
struct stat s;
|
|
struct spkg_file *out_buf;
|
|
|
|
/* Parse the config file */
|
|
if (spkgimage_parse_config_file(params->imagename)) {
|
|
fprintf(stderr, "Error parsing config file\n");
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
|
|
/* Get size of input data file */
|
|
if (stat(params->datafile, &s)) {
|
|
fprintf(stderr, "Could not stat data file: %s: %s\n",
|
|
params->datafile, strerror(errno));
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
params->orig_file_size = s.st_size;
|
|
|
|
/* Determine size of resulting SPKG file */
|
|
uint32_t header_len = SPKG_HEADER_SIZE * SPKG_HEADER_COUNT;
|
|
uint32_t payload_len = conf.blp_len + s.st_size + SPKG_CRC_SIZE;
|
|
uint32_t total_len = header_len + payload_len;
|
|
|
|
/* Round up to next multiple of padding size */
|
|
uint32_t padded_len = roundup(total_len, conf.padding);
|
|
|
|
/* Number of padding bytes to add */
|
|
conf.padding = padded_len - total_len;
|
|
|
|
/* Fixup payload_len to include padding bytes */
|
|
payload_len += conf.padding;
|
|
|
|
/* Prepare the header */
|
|
struct spkg_hdr header = {
|
|
.marker = SPKG_HEADER_MARKER,
|
|
.version = conf.version,
|
|
.ecc = (conf.ecc_enable << 5) | (conf.ecc_block_size << 1),
|
|
.ecc_scheme = conf.ecc_scheme,
|
|
.ecc_bytes = conf.ecc_bytes,
|
|
.payload_length = cpu_to_le32(payload_len << 8),
|
|
.load_address = cpu_to_le32(params->addr),
|
|
.execution_offset = cpu_to_le32(params->ep - params->addr),
|
|
};
|
|
header.crc = crc32(0, (uint8_t *)&header,
|
|
sizeof(header) - SPKG_CRC_SIZE);
|
|
|
|
/* The SPKG contains 8 copies of the header */
|
|
out_buf = malloc(sizeof(struct spkg_file));
|
|
if (!out_buf) {
|
|
fprintf(stderr, "Error: Data filename must be set.\n");
|
|
return -ENOMEM;
|
|
}
|
|
tparams->hdr = out_buf;
|
|
tparams->header_size = sizeof(struct spkg_file);
|
|
|
|
/* Fill the SPKG with the headers */
|
|
for (int i = 0; i < SPKG_HEADER_COUNT; i++)
|
|
memcpy(&out_buf->header[i], &header, sizeof(header));
|
|
|
|
/* Extra bytes to allocate in the output file */
|
|
return conf.blp_len + conf.padding + 4;
|
|
}
|
|
|
|
static void spkgimage_set_header(void *ptr, struct stat *sbuf, int ifd,
|
|
struct image_tool_params *params)
|
|
{
|
|
uint8_t *payload = ptr + SPKG_HEADER_SIZE * SPKG_HEADER_COUNT;
|
|
uint8_t *file_end = payload + conf.blp_len + params->orig_file_size;
|
|
uint8_t *crc_buf = file_end + conf.padding;
|
|
uint32_t crc;
|
|
|
|
/* Make room for the Dummy BLp header */
|
|
memmove(payload + conf.blp_len, payload, params->orig_file_size);
|
|
|
|
/* Fill the SPKG with the Dummy BLp */
|
|
memset(payload, 0x88, conf.blp_len);
|
|
|
|
/*
|
|
* mkimage copy_file() pads the input file with zeros.
|
|
* Replace those zeros with flash friendly one bits.
|
|
* The original version skipped the first 4 bytes,
|
|
* probably an oversight, but for consistency we
|
|
* keep the same behaviour.
|
|
*/
|
|
if (conf.padding >= 4)
|
|
memset(file_end + 4, 0xff, conf.padding - 4);
|
|
|
|
/* Add Payload CRC */
|
|
crc = crc32(0, payload, crc_buf - payload);
|
|
crc_buf[0] = crc;
|
|
crc_buf[1] = crc >> 8;
|
|
crc_buf[2] = crc >> 16;
|
|
crc_buf[3] = crc >> 24;
|
|
}
|
|
|
|
static int spkgimage_check_image_types(uint8_t type)
|
|
{
|
|
return type == IH_TYPE_RENESAS_SPKG ? 0 : -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* spkgimage type parameter definition
|
|
*/
|
|
U_BOOT_IMAGE_TYPE(
|
|
spkgimage,
|
|
"Renesas SPKG Image",
|
|
0,
|
|
NULL,
|
|
spkgimage_check_params,
|
|
spkgimage_verify_header,
|
|
spkgimage_print_header,
|
|
spkgimage_set_header,
|
|
NULL,
|
|
spkgimage_check_image_types,
|
|
NULL,
|
|
spkgimage_vrec_header
|
|
);
|