u-boot/include/configs/dreamplug.h
Quentin Armitage 38c0e864d3 arm: kirkwood: Move common definitions into common file
Create include/configs/mv-plug-common.h for common definitions
for Sheevaplug, Guruplug and Dreamplug. This will make it easier
to ensure the built u-boots stay in track with each other

Signed-off-by: Quentin Armitage <quentin@armitage.org.uk>
2015-11-17 23:41:41 +01:00

109 lines
2.7 KiB
C

/*
* (C) Copyright 2011
* Jason Cooper <u-boot@lakedaemon.net>
*
* Based on work by:
* Marvell Semiconductor <www.marvell.com>
* Written-by: Siddarth Gore <gores@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_DREAMPLUG_H
#define _CONFIG_DREAMPLUG_H
/*
* FIXME: This belongs in mach-types.h. However, we only pull mach-types
* from Linus' kernel.org tree. This hasn't been updated primarily due to
* the recent arch/arm reshuffling. So, in the meantime, we'll place it
* here.
*/
#include <asm/mach-types.h>
#ifdef MACH_TYPE_DREAMPLUG
#error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
#else
#define MACH_TYPE_DREAMPLUG 3550
#endif
/*
* Version number information
*/
#define CONFIG_IDENT_STRING "\nMarvell-DreamPlug"
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
#define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
/*
* Commands configuration
*/
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
/*
* mv-plug-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-plug-common.h"
/*
* Environment variables configurations
*/
#ifdef CONFIG_SPI_FLASH
#define CONFIG_ENV_IS_IN_SPI_FLASH 1
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
#else
#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
#endif
#ifdef CONFIG_CMD_SF
#define CONFIG_HARD_SPI 1
#define CONFIG_KIRKWOOD_SPI 1
#define CONFIG_SPI_FLASH_MACRONIX 1
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_CS 0
#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
#endif
/*
* max 4k env size is enough, but in case of nand
* it has to be rounded to sector size
*/
#define CONFIG_ENV_SIZE 0x1000 /* 4k */
#define CONFIG_ENV_ADDR 0x100000
#define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
/*
* Default environment variables
*/
#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
"bootm 0x6400000;"
#define CONFIG_EXTRA_ENV_SETTINGS \
"x_bootcmd_ethernet=ping 192.168.2.1\0" \
"x_bootcmd_usb=usb start\0" \
"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
"x_bootargs=console=ttyS0,115200\0" \
"x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
/*
* SATA Driver configuration
*/
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/
#endif /* _CONFIG_DREAMPLUG_H */