mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
105 lines
3.3 KiB
C
105 lines
3.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Sysam AMCORE board configuration
|
|
*
|
|
* (C) Copyright 2016 Angelo Dureghello <angelo@sysam.it>
|
|
*/
|
|
|
|
#ifndef __AMCORE_CONFIG_H
|
|
#define __AMCORE_CONFIG_H
|
|
|
|
#define CONFIG_HOSTNAME "AMCORE"
|
|
|
|
#define CONFIG_MCFTMR
|
|
#define CONFIG_MCFUART
|
|
#define CONFIG_SYS_UART_PORT 0
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CONFIG_BOOTCOMMAND "bootm ffc20000"
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"upgrade_uboot=loady; " \
|
|
"protect off 0xffc00000 0xffc1ffff; " \
|
|
"erase 0xffc00000 0xffc1ffff; " \
|
|
"cp.b 0x20000 0xffc00000 ${filesize}\0" \
|
|
"upgrade_kernel=loady; " \
|
|
"erase 0xffc20000 0xffefffff; " \
|
|
"cp.b 0x20000 0xffc20000 ${filesize}\0" \
|
|
"upgrade_jffs2=loady; " \
|
|
"erase 0xfff00000 0xffffffff; " \
|
|
"cp.b 0x20000 0xfff00000 ${filesize}\0"
|
|
|
|
/* undef to save memory */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x0
|
|
#define CONFIG_SYS_MEMTEST_END 0x1000000
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
#define CONFIG_SYS_CLK 45000000
|
|
#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 2)
|
|
/* Register Base Addrs */
|
|
#define CONFIG_SYS_MBAR 0x10000000
|
|
/* Definitions for initial stack pointer and data area (in DPRAM) */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
|
|
/* size of internal SRAM */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x1000000
|
|
#define CONFIG_SYS_FLASH_BASE 0xffc00000
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 1024
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
|
|
|
|
/* amcore design has flash data bytes wired swapped */
|
|
#define CONFIG_SYS_WRITE_SWAPPED_DATA
|
|
/* reserve 128-4KB */
|
|
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
|
|
#define CONFIG_SYS_MONITOR_LEN ((128 - 4) * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
|
|
#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024)
|
|
|
|
#define LDS_BOARD_TEXT \
|
|
. = DEFINED(env_offset) ? env_offset : .; \
|
|
env/embedded.o(.text*);
|
|
|
|
/* memory map space for linux boot data */
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
|
|
|
|
/*
|
|
* Cache Configuration
|
|
*
|
|
* Special 8K version 3 core cache.
|
|
* This is a single unified instruction/data cache.
|
|
* sdram - single region - no masks
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 16
|
|
|
|
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - 8)
|
|
#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - 4)
|
|
#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
|
|
#define CONFIG_SYS_CACHE_ACR0 (CF_ACR_CM_WT | CF_ACR_SM_ALL | \
|
|
CF_ACR_EN)
|
|
#define CONFIG_SYS_CACHE_ICACR (CF_CACR_DCM_P | CF_CACR_ESB | \
|
|
CF_CACR_EC)
|
|
|
|
/* CS0 - AMD Flash, address 0xffc00000 */
|
|
#define CONFIG_SYS_CS0_BASE (CONFIG_SYS_FLASH_BASE>>16)
|
|
/* 4MB, AA=0,V=1 C/I BIT for errata */
|
|
#define CONFIG_SYS_CS0_MASK 0x003f0001
|
|
/* WS=10, AA=1, PS=16bit (10) */
|
|
#define CONFIG_SYS_CS0_CTRL 0x1980
|
|
/* CS1 - DM9000 Ethernet Controller, address 0x30000000 */
|
|
#define CONFIG_SYS_CS1_BASE 0x3000
|
|
#define CONFIG_SYS_CS1_MASK 0x00070001
|
|
#define CONFIG_SYS_CS1_CTRL 0x0100
|
|
|
|
#endif /* __AMCORE_CONFIG_H */
|
|
|