u-boot/arch/arm/mach-omap2/config.mk
Tom Rini 983e37007d arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms
This moves what was in arch/arm/cpu/armv7/omap-common in to
arch/arm/mach-omap2 and moves
arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2
as subdirectories.  All refernces to the former locations are updated to
the current locations.  For the logic to decide what our outputs are,
consolidate the tests into a single config.mk rather than including 4.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-21 14:07:29 -05:00

53 lines
1.2 KiB
Makefile

#
# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
#
# SPDX-License-Identifier: GPL-2.0+
include $(srctree)/arch/arm/mach-omap2/config_secure.mk
ifdef CONFIG_SPL_BUILD
ifeq ($(CONFIG_AM33XX)$(CONFIG_TI_SECURE_DEVICE),yy)
#
# For booting from SPI use
# u-boot-spl_HS_SPI_X-LOADER to program flash
#
# On AM43XX:
#
# For booting spl from all other media use
# u-boot-spl_HS_ISSW
#
# On AM33XX:
#
# For booting spl from NAND flash use
# u-boot-spl_HS_X-LOADER
#
# For booting spl from SD/MMC/eMMC media use
# u-boot-spl_HS_MLO
#
# For booting spl over UART, USB, or Ethernet use
# u-boot-spl_HS_2ND
#
# Refer to README.ti-secure for more info
#
ALL-y += u-boot-spl_HS_ISSW
ALL-y += u-boot-spl_HS_SPI_X-LOADER
ALL-y += u-boot-spl_HS_X-LOADER
ALL-y += u-boot-spl_HS_MLO
ALL-y += u-boot-spl_HS_2ND
else
ifeq ($(CONFIG_OMAP54XX)$(CONFIG_TI_SECURE_DEVICE),yy)
ALL-y += u-boot-spl_HS_MLO u-boot-spl_HS_X-LOADER
else
ALL-y += MLO
ifeq ($(CONFIG_AM33XX),y)
ALL-y += MLO.byteswap
endif
endif
endif
else
ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
ALL-$(CONFIG_QSPI_BOOT) += u-boot_HS_XIP_X-LOADER
ALL-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img
endif
ALL-y += u-boot.img
endif