mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
54e4fcfa3c
Check BOOT_CFG2[3:4] to determine which SD/MMC port is selected to boot from. If MMC2 is selected return BOOT_DEVICE_MMC2. In all other cases return BOOT_DEVICE_MMC1, as we do not have corresponding macro for MMC3 and MMC4. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
96 lines
2.3 KiB
C
96 lines
2.3 KiB
C
/*
|
|
* Copyright (C) 2014 Gateworks Corporation
|
|
* Copyright (C) 2011-2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* Author: Tim Harvey <tharvey@gateworks.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/spl.h>
|
|
#include <spl.h>
|
|
|
|
#if defined(CONFIG_MX6)
|
|
#define MX6_MMC_PORT_MASK GENMASK(12, 11)
|
|
#define MX6_MMC_PORT_2 BIT(11)
|
|
|
|
/* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */
|
|
u32 spl_boot_device(void)
|
|
{
|
|
struct src *psrc = (struct src *)SRC_BASE_ADDR;
|
|
unsigned int gpr10_boot = readl(&psrc->gpr10) & (1 << 28);
|
|
unsigned reg = gpr10_boot ? readl(&psrc->gpr9) : readl(&psrc->sbmr1);
|
|
unsigned int bmode = readl(&psrc->sbmr2);
|
|
|
|
/*
|
|
* Check for BMODE if serial downloader is enabled
|
|
* BOOT_MODE - see IMX6DQRM Table 8-1
|
|
*/
|
|
if ((((bmode >> 24) & 0x03) == 0x01) || /* Serial Downloader */
|
|
(gpr10_boot && (reg == 1)))
|
|
return BOOT_DEVICE_UART;
|
|
/* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
|
|
switch ((reg & 0x000000FF) >> 4) {
|
|
/* EIM: See 8.5.1, Table 8-9 */
|
|
case 0x0:
|
|
/* BOOT_CFG1[3]: NOR/OneNAND Selection */
|
|
if ((reg & 0x00000008) >> 3)
|
|
return BOOT_DEVICE_ONENAND;
|
|
else
|
|
return BOOT_DEVICE_NOR;
|
|
break;
|
|
/* SATA: See 8.5.4, Table 8-20 */
|
|
case 0x2:
|
|
return BOOT_DEVICE_SATA;
|
|
/* Serial ROM: See 8.5.5.1, Table 8-22 */
|
|
case 0x3:
|
|
/* BOOT_CFG4[2:0] */
|
|
switch ((reg & 0x07000000) >> 24) {
|
|
case 0x0 ... 0x4:
|
|
return BOOT_DEVICE_SPI;
|
|
case 0x5 ... 0x7:
|
|
return BOOT_DEVICE_I2C;
|
|
}
|
|
break;
|
|
/* SD/eSD: 8.5.3, Table 8-15 */
|
|
case 0x4:
|
|
case 0x5:
|
|
/* MMC/eMMC: 8.5.3 */
|
|
case 0x6:
|
|
case 0x7:
|
|
if ((reg & MX6_MMC_PORT_MASK) == MX6_MMC_PORT_2)
|
|
return BOOT_DEVICE_MMC2;
|
|
return BOOT_DEVICE_MMC1;
|
|
/* NAND Flash: 8.5.2 */
|
|
case 0x8 ... 0xf:
|
|
return BOOT_DEVICE_NAND;
|
|
}
|
|
return BOOT_DEVICE_NONE;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPL_MMC_SUPPORT)
|
|
/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
|
|
u32 spl_boot_mode(const u32 boot_device)
|
|
{
|
|
switch (spl_boot_device()) {
|
|
/* for MMC return either RAW or FAT mode */
|
|
case BOOT_DEVICE_MMC1:
|
|
case BOOT_DEVICE_MMC2:
|
|
#if defined(CONFIG_SPL_FAT_SUPPORT)
|
|
return MMCSD_MODE_FS;
|
|
#elif defined(CONFIG_SUPPORT_EMMC_BOOT)
|
|
return MMCSD_MODE_EMMCBOOT;
|
|
#else
|
|
return MMCSD_MODE_RAW;
|
|
#endif
|
|
break;
|
|
default:
|
|
puts("spl: ERROR: unsupported device\n");
|
|
hang();
|
|
}
|
|
}
|
|
#endif
|