u-boot/configs/imxrt1020-evk_defconfig
Ovidiu Panait 2dfdd0c4de Kconfig: Use hex values for CONFIG_{SPL,TPL}_SIZE_LIMIT
CONFIG_{SPL,TPL}_SIZE_LIMIT are defined as hex (SPL_SIZE_LIMIT was
converted in b51882d0 ("spl: Convert CONFIG_SPL_SIZE_LIMIT to hex"), but
there are still places that reference integer values. Change those to hex
as well. Also, update the Makefile to check for 0x0 instead of 0.

This also fixes the following build error when CONFIG_SPL_SIZE_LIMIT
is set by menuconfig to 0x0:
...
spl/u-boot-spl.bin exceeds file size limit:
  limit:  0 bytes
  actual: 0x80f0 bytes
  excess: 0x80f0 bytes

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22 09:54:52 -04:00

67 lines
1.7 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_IMXRT=y
CONFIG_SYS_TEXT_BASE=0x80002000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_OFFSET=0x80000
CONFIG_DM_GPIO=y
CONFIG_SPL_TEXT_BASE=0x20209000
CONFIG_TARGET_IMXRT1020_EVK=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SIZE_LIMIT=0x20000
CONFIG_SPL=y
CONFIG_DEFAULT_DEVICE_TREE="imxrt1020-evk"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SD_BOOT=y
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
# CONFIG_SPL_CRC32_SUPPORT is not set
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_MII is not set
# CONFIG_DOS_PARTITION is not set
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_TFTP_BLOCKSIZE=512
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
# CONFIG_OF_TRANSLATE is not set
CONFIG_SPL_CLK_COMPOSITE_CCF=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_SPL_CLK_IMXRT1020=y
CONFIG_CLK_IMXRT1020=y
# CONFIG_SPL_DM_GPIO is not set
CONFIG_MXC_GPIO=y
# CONFIG_INPUT is not set
CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
CONFIG_DM_ETH=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMXRT=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_IMXRT_SDRAM=y
CONFIG_FSL_LPUART=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_SHA1=y
CONFIG_SHA256=y
CONFIG_HEXDUMP=y