mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
25ddd1fb0a
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
293 lines
10 KiB
C
293 lines
10 KiB
C
/*
|
|
* (C) Copyright 2003
|
|
* Denis Peter d.peter@mpl.ch
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation,
|
|
*/
|
|
|
|
/*
|
|
* File: PATI.h
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
|
|
#define CONFIG_MPC555 1 /* This is an MPC555 CPU */
|
|
#define CONFIG_PATI 1 /* ...On a PATI board */
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
|
|
|
|
/* Serial Console Configuration */
|
|
#define CONFIG_5xx_CONS_SCI1
|
|
#undef CONFIG_5xx_CONS_SCI2
|
|
|
|
#define CONFIG_BAUDRATE 9600
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#define CONFIG_CMD_MEMORY
|
|
#define CONFIG_CMD_LOADB
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_FLASH
|
|
#define CONFIG_CMD_LOADS
|
|
#define CONFIG_CMD_SAVEENV
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_BDI
|
|
#define CONFIG_CMD_CONSOLE
|
|
#define CONFIG_CMD_RUN
|
|
#define CONFIG_CMD_BSP
|
|
#define CONFIG_CMD_IMI
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_MISC
|
|
|
|
|
|
#if 0
|
|
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
|
#else
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
#endif
|
|
#define CONFIG_BOOTCOMMAND "" /* autoboot command */
|
|
|
|
#define CONFIG_BOOTARGS "" /* */
|
|
|
|
#define CONFIG_WATCHDOG /* turn on platform specific watchdog */
|
|
|
|
/*#define CONFIG_STATUS_LED 1 */ /* Enable status led */
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* Echo on for serial download */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */
|
|
#define CONFIG_PREBOOT
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "pati=> " /* Monitor Command Prompt */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00010000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x00A00000 /* 10 MB in SRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }
|
|
|
|
|
|
/***********************************************************************
|
|
* Last Stage Init
|
|
***********************************************************************/
|
|
#define CONFIG_LAST_STAGE_INIT
|
|
|
|
/*
|
|
* Low Level Configuration Settings
|
|
*/
|
|
|
|
/*
|
|
* Internal Memory Mapped (This is not the IMMR content)
|
|
*/
|
|
#define CONFIG_SYS_IMMR 0x01C00000 /* Physical start adress of internal memory map */
|
|
|
|
/*
|
|
* Definitions for initial stack pointer and data area
|
|
*/
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - GENERATED_GBL_DATA_SIZE) /* Offset from the beginning of ram */
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IMMR + 0x03fa000) /* Physical start adress of inital stack */
|
|
/*
|
|
* Start addresses for the final memory configuration
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
|
|
#define CONFIG_SYS_FLASH_BASE 0xffC00000 /* External flash */
|
|
#define PCI_BASE 0x03000000 /* PCI Base (CS2) */
|
|
#define PCI_CONFIG_BASE 0x04000000 /* PCI & PLD (CS3) */
|
|
#define PLD_CONFIG_BASE 0x04001000 /* PLD (CS3) */
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE 0xFFF00000
|
|
/* CONFIG_SYS_FLASH_BASE */ /* CONFIG_SYS_TEXT_BASE is defined in the board config.mk file. */
|
|
/* This adress is given to the linker with -Ttext to */
|
|
/* locate the text section at this adress. */
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 192 kB for Monitor */
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
|
|
#define CONFIG_SYS_RESET_ADDRESS (PLD_CONFIG_BASE + 0x10) /* Adress which causes reset */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*-----------------------------------------------------------------------
|
|
*
|
|
*/
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max number of sectors on one chip */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
|
|
|
|
|
|
#define CONFIG_ENV_IS_IN_EEPROM
|
|
#ifdef CONFIG_ENV_IS_IN_EEPROM
|
|
#define CONFIG_ENV_OFFSET 0
|
|
#define CONFIG_ENV_SIZE 2048
|
|
#endif
|
|
|
|
#undef CONFIG_ENV_IS_IN_FLASH
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_SIZE 0x00002000 /* Set whole sector as env */
|
|
#define CONFIG_ENV_OFFSET ((0 - CONFIG_SYS_FLASH_BASE) - CONFIG_ENV_SIZE) /* Environment starts at this adress */
|
|
#endif
|
|
|
|
|
|
#define CONFIG_SPI 1
|
|
#define CONFIG_SYS_SPI_CS_USED 0x09 /* CS0 and CS3 are used */
|
|
#define CONFIG_SYS_SPI_CS_BASE 0x08 /* CS3 is active low */
|
|
#define CONFIG_SYS_SPI_CS_ACT 0x00 /* CS3 is active low */
|
|
/*-----------------------------------------------------------------------
|
|
* SYPCR - System Protection Control
|
|
* SYPCR can only be written once after reset!
|
|
*-----------------------------------------------------------------------
|
|
* SW Watchdog freeze
|
|
*/
|
|
#undef CONFIG_WATCHDOG
|
|
#if defined(CONFIG_WATCHDOG)
|
|
#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
|
|
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
|
|
#else
|
|
#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
|
|
SYPCR_SWP)
|
|
#endif /* CONFIG_WATCHDOG */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* TBSCR - Time Base Status and Control
|
|
*-----------------------------------------------------------------------
|
|
* Clear Reference Interrupt Status, Timebase freezing enabled
|
|
*/
|
|
#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PISCR - Periodic Interrupt Status and Control
|
|
*-----------------------------------------------------------------------
|
|
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
|
|
*/
|
|
#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SCCR - System Clock and reset Control Register
|
|
*-----------------------------------------------------------------------
|
|
* Set clock output, timebase and RTC source and divider,
|
|
* power management and some other internal clocks
|
|
*/
|
|
#define SCCR_MASK SCCR_EBDF00
|
|
#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_RTDIV | SCCR_RTSEL | \
|
|
SCCR_COM01 | SCCR_DFNL000 | SCCR_DFNH000)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SIUMCR - SIU Module Configuration
|
|
*-----------------------------------------------------------------------
|
|
* Data show cycle
|
|
*/
|
|
#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_EARB | SIUMCR_GPC01 | SIUMCR_MLRC11) /* Disable data show cycle */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PLPRCR - PLL, Low-Power, and Reset Control Register
|
|
*-----------------------------------------------------------------------
|
|
* Set all bits to 40 Mhz
|
|
*
|
|
*/
|
|
#define CONFIG_SYS_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
|
|
|
|
|
|
#define CONFIG_SYS_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* UMCR - UIMB Module Configuration Register
|
|
*-----------------------------------------------------------------------
|
|
*
|
|
*/
|
|
#define CONFIG_SYS_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* ICTRL - I-Bus Support Control Register
|
|
*/
|
|
#define CONFIG_SYS_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* USIU - Memory Controller Register
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_V | BR_BI | BR_PS_16 | BR_SETA)
|
|
#define CONFIG_SYS_OR0_PRELIM (0xffc00000) /* SCY is not used if external TA is set */
|
|
/* SDRAM */
|
|
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_SDRAM_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
|
|
#define CONFIG_SYS_OR1_PRELIM (OR_ADDR_MK_FF) /* SCY is not used if external TA is set */
|
|
/* PCI */
|
|
#define CONFIG_SYS_BR2_PRELIM (PCI_BASE | BR_V | BR_PS_32 | BR_SETA)
|
|
#define CONFIG_SYS_OR2_PRELIM (OR_ADDR_MK_FF)
|
|
/* config registers: */
|
|
#define CONFIG_SYS_BR3_PRELIM (PCI_CONFIG_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
|
|
#define CONFIG_SYS_OR3_PRELIM (0xffff0000)
|
|
|
|
#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* We don't realign the flash */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* DER - Timer Decrementer
|
|
*-----------------------------------------------------------------------
|
|
* Initialise to zero
|
|
*/
|
|
#define CONFIG_SYS_DER 0x00000000
|
|
|
|
#define VERSION_TAG "released"
|
|
#define CONFIG_ISO_STRING "MEV-10084-001"
|
|
|
|
#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
|
|
|
|
#endif /* __CONFIG_H */
|