mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
2fe88d4522
This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
110 lines
3.3 KiB
C
110 lines
3.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2010-2017 CS Systemes d'Information
|
|
* Christophe Leroy <christophe.leroy@c-s.fr>
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* High Level Configuration Options */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"sdram_type=SDRAM\0" \
|
|
"flash_type=AM29LV160DB\0" \
|
|
"loadaddr=0x400000\0" \
|
|
"filename=uImage.lzma\0" \
|
|
"nfsroot=/opt/ofs\0" \
|
|
"dhcp_ip=ip=:::::eth0:dhcp\0" \
|
|
"console_args=console=ttyCPM0,115200N8\0" \
|
|
"flashboot=setenv bootargs " \
|
|
"${console_args} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
|
|
"mcr3k:eth0:off;" \
|
|
"${ofl_args}; " \
|
|
"bootm 0x04060000 - 0x04050000\0" \
|
|
"tftpboot=setenv bootargs " \
|
|
"${console_args} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
|
|
"mcr3k:eth0:off " \
|
|
"${ofl_args}; " \
|
|
"tftp ${loadaddr} ${filename};" \
|
|
"tftp 0xf00000 mcr3000.dtb;" \
|
|
"bootm ${loadaddr} - 0xf00000\0" \
|
|
"netboot=dhcp ${loadaddr} ${filename};" \
|
|
"tftp 0xf00000 mcr3000.dtb;" \
|
|
"setenv bootargs " \
|
|
"root=/dev/nfs rw " \
|
|
"${console_args} " \
|
|
"${dhcp_ip};" \
|
|
"bootm ${loadaddr} - 0xf00000\0" \
|
|
"nfsboot=setenv bootargs " \
|
|
"root=/dev/nfs rw nfsroot=${serverip}:${nfsroot} " \
|
|
"${console_args} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
|
|
"mcr3k:eth0:off;" \
|
|
"bootm 0x04060000 - 0x04050000\0" \
|
|
"dhcpboot=dhcp ${loadaddr} ${filename};" \
|
|
"tftp 0xf00000 mcr3000.dtb;" \
|
|
"setenv bootargs " \
|
|
"${console_args} " \
|
|
"${dhcp_ip} " \
|
|
"${ofl_args}; " \
|
|
"bootm ${loadaddr} - 0xf00000\0"
|
|
|
|
#define CONFIG_IPADDR 192.168.0.3
|
|
#define CONFIG_SERVERIP 192.168.0.1
|
|
#define CONFIG_NETMASK 255.0.0.0
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
|
|
/* Miscellaneous configurable options */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00002000
|
|
#define CONFIG_SYS_MEMTEST_END 0x00800000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x200000
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/* Definitions for initial stack pointer and data area (in DPRAM) */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800)
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800)
|
|
|
|
/* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
|
|
/* FLASH organization */
|
|
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 35
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
|
|
#define CONFIG_SYS_MONITOR_LEN (320 << 10)
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MALLOC_LEN (4096 << 10)
|
|
|
|
/* Environment Configuration */
|
|
|
|
/* environment is in FLASH */
|
|
#define CONFIG_ENV_SECT_SIZE 0x2000
|
|
#define CONFIG_ENV_OFFSET 0x4000
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/* Ethernet configuration part */
|
|
#define CONFIG_SYS_DISCOVER_PHY 1
|
|
#define CONFIG_MII_INIT 1
|
|
|
|
/* NAND configuration part */
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_MAX_CHIPS 1
|
|
#define CONFIG_SYS_NAND_BASE 0x0C000000
|
|
|
|
#endif /* __CONFIG_H */
|