mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 10:30:32 +00:00
be0da1257f
In the MTD DFU backend, it is needed to mark the NAND block bad when the erase failed with the -EIO error, as it is done in UBI and JFFS2 code. This operation is not done in the MTD framework, but the bad block tag (in BBM or in BBT) is required to avoid to write data on this block in the next DFU_OP_WRITE loop in mtd_block_op(): the code skip the bad blocks, tested by mtd_block_isbad(). Without this patch, when the NAND block become bad on DFU write operation - low probability on new NAND - the DFU write operation will always failed because the failing block is never marked bad. This patch also adds a test to avoid to request an erase operation on a block already marked bad; this test is not performed in MTD framework in mtd_erase(). Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
375 lines
8.8 KiB
C
375 lines
8.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* dfu_mtd.c -- DFU for MTD device.
|
|
*
|
|
* Copyright (C) 2019,STMicroelectronics - All Rights Reserved
|
|
*
|
|
* Based on dfu_nand.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dfu.h>
|
|
#include <mtd.h>
|
|
#include <linux/err.h>
|
|
#include <linux/ctype.h>
|
|
|
|
static bool mtd_is_aligned_with_block_size(struct mtd_info *mtd, u64 size)
|
|
{
|
|
return !do_div(size, mtd->erasesize);
|
|
}
|
|
|
|
/* Logic taken from cmd/mtd.c:mtd_oob_write_is_empty() */
|
|
static bool mtd_page_is_empty(struct mtd_oob_ops *op)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < op->len; i++)
|
|
if (op->datbuf[i] != 0xff)
|
|
return false;
|
|
|
|
/* oob is not used, with MTD_OPS_AUTO_OOB & ooblen=0 */
|
|
|
|
return true;
|
|
}
|
|
|
|
static int mtd_block_op(enum dfu_op op, struct dfu_entity *dfu,
|
|
u64 offset, void *buf, long *len)
|
|
{
|
|
u64 off, lim, remaining, lock_ofs, lock_len;
|
|
struct mtd_info *mtd = dfu->data.mtd.info;
|
|
struct mtd_oob_ops io_op = {};
|
|
int ret = 0;
|
|
bool has_pages = mtd->type == MTD_NANDFLASH ||
|
|
mtd->type == MTD_MLCNANDFLASH;
|
|
|
|
/* if buf == NULL return total size of the area */
|
|
if (!buf) {
|
|
*len = dfu->data.mtd.size;
|
|
return 0;
|
|
}
|
|
|
|
off = lock_ofs = dfu->data.mtd.start + offset + dfu->bad_skip;
|
|
lim = dfu->data.mtd.start + dfu->data.mtd.size;
|
|
|
|
if (off >= lim) {
|
|
printf("Limit reached 0x%llx\n", lim);
|
|
*len = 0;
|
|
return op == DFU_OP_READ ? 0 : -EIO;
|
|
}
|
|
/* limit request with the available size */
|
|
if (off + *len >= lim)
|
|
*len = lim - off;
|
|
|
|
if (!mtd_is_aligned_with_block_size(mtd, off)) {
|
|
printf("Offset not aligned with a block (0x%x)\n",
|
|
mtd->erasesize);
|
|
return 0;
|
|
}
|
|
|
|
/* first erase */
|
|
if (op == DFU_OP_WRITE) {
|
|
struct erase_info erase_op = {};
|
|
|
|
remaining = lock_len = round_up(*len, mtd->erasesize);
|
|
erase_op.mtd = mtd;
|
|
erase_op.addr = off;
|
|
erase_op.len = mtd->erasesize;
|
|
erase_op.scrub = 0;
|
|
|
|
debug("Unlocking the mtd device\n");
|
|
ret = mtd_unlock(mtd, lock_ofs, lock_len);
|
|
if (ret && ret != -EOPNOTSUPP) {
|
|
printf("MTD device unlock failed\n");
|
|
return 0;
|
|
}
|
|
|
|
while (remaining) {
|
|
if (erase_op.addr + remaining > lim) {
|
|
printf("Limit reached 0x%llx while erasing at offset 0x%llx, remaining 0x%llx\n",
|
|
lim, erase_op.addr, remaining);
|
|
return -EIO;
|
|
}
|
|
|
|
/* Skip the block if it is bad, don't erase it again */
|
|
ret = mtd_block_isbad(mtd, erase_op.addr);
|
|
if (ret) {
|
|
printf("Skipping %s at 0x%08llx\n",
|
|
ret == 1 ? "bad block" : "bbt reserved",
|
|
erase_op.addr);
|
|
erase_op.addr += mtd->erasesize;
|
|
continue;
|
|
}
|
|
|
|
ret = mtd_erase(mtd, &erase_op);
|
|
|
|
if (ret) {
|
|
/* If this is not -EIO, we have no idea what to do. */
|
|
if (ret == -EIO) {
|
|
printf("Marking bad block at 0x%08llx (%d)\n",
|
|
erase_op.fail_addr, ret);
|
|
ret = mtd_block_markbad(mtd, erase_op.addr);
|
|
}
|
|
/* Abort if it is not -EIO or can't mark bad */
|
|
if (ret) {
|
|
printf("Failure while erasing at offset 0x%llx (%d)\n",
|
|
erase_op.fail_addr, ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
remaining -= mtd->erasesize;
|
|
}
|
|
|
|
/* Continue erase behind the current block */
|
|
erase_op.addr += mtd->erasesize;
|
|
}
|
|
}
|
|
|
|
io_op.mode = MTD_OPS_AUTO_OOB;
|
|
io_op.len = *len;
|
|
if (has_pages && io_op.len > mtd->writesize)
|
|
io_op.len = mtd->writesize;
|
|
io_op.ooblen = 0;
|
|
io_op.datbuf = buf;
|
|
io_op.oobbuf = NULL;
|
|
|
|
/* Loop over to do the actual read/write */
|
|
remaining = *len;
|
|
while (remaining) {
|
|
if (off + remaining > lim) {
|
|
printf("Limit reached 0x%llx while %s at offset 0x%llx\n",
|
|
lim, op == DFU_OP_READ ? "reading" : "writing",
|
|
off);
|
|
if (op == DFU_OP_READ) {
|
|
*len -= remaining;
|
|
return 0;
|
|
} else {
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/* Skip the block if it is bad */
|
|
if (mtd_is_aligned_with_block_size(mtd, off) &&
|
|
mtd_block_isbad(mtd, off)) {
|
|
off += mtd->erasesize;
|
|
dfu->bad_skip += mtd->erasesize;
|
|
continue;
|
|
}
|
|
|
|
if (op == DFU_OP_READ)
|
|
ret = mtd_read_oob(mtd, off, &io_op);
|
|
else if (has_pages && dfu->data.mtd.ubi && mtd_page_is_empty(&io_op)) {
|
|
/* in case of ubi partition, do not write an empty page, only skip it */
|
|
ret = 0;
|
|
io_op.retlen = mtd->writesize;
|
|
io_op.oobretlen = mtd->oobsize;
|
|
} else {
|
|
ret = mtd_write_oob(mtd, off, &io_op);
|
|
}
|
|
|
|
if (ret) {
|
|
printf("Failure while %s at offset 0x%llx\n",
|
|
op == DFU_OP_READ ? "reading" : "writing", off);
|
|
return -EIO;
|
|
}
|
|
|
|
off += io_op.retlen;
|
|
remaining -= io_op.retlen;
|
|
io_op.datbuf += io_op.retlen;
|
|
io_op.len = remaining;
|
|
if (has_pages && io_op.len > mtd->writesize)
|
|
io_op.len = mtd->writesize;
|
|
}
|
|
|
|
if (op == DFU_OP_WRITE) {
|
|
/* Write done, lock again */
|
|
debug("Locking the mtd device\n");
|
|
ret = mtd_lock(mtd, lock_ofs, lock_len);
|
|
if (ret == -EOPNOTSUPP)
|
|
ret = 0;
|
|
else if (ret)
|
|
printf("MTD device lock failed\n");
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int dfu_get_medium_size_mtd(struct dfu_entity *dfu, u64 *size)
|
|
{
|
|
*size = dfu->data.mtd.info->size;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dfu_read_medium_mtd(struct dfu_entity *dfu, u64 offset, void *buf,
|
|
long *len)
|
|
{
|
|
int ret = -1;
|
|
|
|
switch (dfu->layout) {
|
|
case DFU_RAW_ADDR:
|
|
ret = mtd_block_op(DFU_OP_READ, dfu, offset, buf, len);
|
|
break;
|
|
default:
|
|
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
|
|
dfu_get_layout(dfu->layout));
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dfu_write_medium_mtd(struct dfu_entity *dfu,
|
|
u64 offset, void *buf, long *len)
|
|
{
|
|
int ret = -1;
|
|
|
|
switch (dfu->layout) {
|
|
case DFU_RAW_ADDR:
|
|
ret = mtd_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
|
|
break;
|
|
default:
|
|
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
|
|
dfu_get_layout(dfu->layout));
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dfu_flush_medium_mtd(struct dfu_entity *dfu)
|
|
{
|
|
struct mtd_info *mtd = dfu->data.mtd.info;
|
|
u64 remaining;
|
|
int ret;
|
|
|
|
/* in case of ubi partition, erase rest of the partition */
|
|
if (dfu->data.mtd.ubi) {
|
|
struct erase_info erase_op = {};
|
|
|
|
erase_op.mtd = dfu->data.mtd.info;
|
|
erase_op.addr = round_up(dfu->data.mtd.start + dfu->offset +
|
|
dfu->bad_skip, mtd->erasesize);
|
|
erase_op.len = mtd->erasesize;
|
|
erase_op.scrub = 0;
|
|
|
|
remaining = dfu->data.mtd.start + dfu->data.mtd.size -
|
|
erase_op.addr;
|
|
|
|
while (remaining) {
|
|
ret = mtd_erase(mtd, &erase_op);
|
|
|
|
if (ret) {
|
|
/* Abort if its not a bad block error */
|
|
if (ret != -EIO)
|
|
break;
|
|
printf("Skipping bad block at 0x%08llx\n",
|
|
erase_op.addr);
|
|
}
|
|
|
|
/* Skip bad block and continue behind it */
|
|
erase_op.addr += mtd->erasesize;
|
|
remaining -= mtd->erasesize;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int dfu_polltimeout_mtd(struct dfu_entity *dfu)
|
|
{
|
|
/*
|
|
* Currently, Poll Timeout != 0 is only needed on nand
|
|
* ubi partition, as sectors which are not used need
|
|
* to be erased
|
|
*/
|
|
if (dfu->data.mtd.ubi)
|
|
return DFU_MANIFEST_POLL_TIMEOUT;
|
|
|
|
return DFU_DEFAULT_POLL_TIMEOUT;
|
|
}
|
|
|
|
int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr, char **argv, int argc)
|
|
{
|
|
char *s;
|
|
struct mtd_info *mtd;
|
|
int part;
|
|
|
|
mtd = get_mtd_device_nm(devstr);
|
|
if (IS_ERR_OR_NULL(mtd))
|
|
return -ENODEV;
|
|
put_mtd_device(mtd);
|
|
|
|
dfu->dev_type = DFU_DEV_MTD;
|
|
dfu->data.mtd.info = mtd;
|
|
dfu->max_buf_size = mtd->erasesize;
|
|
if (argc < 1)
|
|
return -EINVAL;
|
|
|
|
if (!strcmp(argv[0], "raw")) {
|
|
if (argc != 3)
|
|
return -EINVAL;
|
|
dfu->layout = DFU_RAW_ADDR;
|
|
dfu->data.mtd.start = hextoul(argv[1], &s);
|
|
if (*s)
|
|
return -EINVAL;
|
|
dfu->data.mtd.size = hextoul(argv[2], &s);
|
|
if (*s)
|
|
return -EINVAL;
|
|
} else if ((!strcmp(argv[0], "part")) || (!strcmp(argv[0], "partubi"))) {
|
|
struct mtd_info *partition;
|
|
int partnum = 0;
|
|
bool part_found = false;
|
|
|
|
if (argc != 2)
|
|
return -EINVAL;
|
|
|
|
dfu->layout = DFU_RAW_ADDR;
|
|
|
|
part = dectoul(argv[1], &s);
|
|
if (*s)
|
|
return -EINVAL;
|
|
|
|
/* register partitions with MTDIDS/MTDPARTS or OF fallback */
|
|
mtd_probe_devices();
|
|
|
|
partnum = 0;
|
|
list_for_each_entry(partition, &mtd->partitions, node) {
|
|
partnum++;
|
|
if (partnum == part) {
|
|
part_found = true;
|
|
break;
|
|
}
|
|
}
|
|
if (!part_found) {
|
|
printf("No partition %d in %s\n", part, mtd->name);
|
|
return -1;
|
|
}
|
|
log_debug("partition %d:%s in %s\n", partnum, partition->name, mtd->name);
|
|
|
|
dfu->data.mtd.start = partition->offset;
|
|
dfu->data.mtd.size = partition->size;
|
|
if (!strcmp(argv[0], "partubi"))
|
|
dfu->data.mtd.ubi = 1;
|
|
} else {
|
|
printf("%s: Memory layout (%s) not supported!\n", __func__, argv[0]);
|
|
return -1;
|
|
}
|
|
|
|
if (!mtd_is_aligned_with_block_size(mtd, dfu->data.mtd.start)) {
|
|
printf("Offset not aligned with a block (0x%x)\n",
|
|
mtd->erasesize);
|
|
return -EINVAL;
|
|
}
|
|
if (!mtd_is_aligned_with_block_size(mtd, dfu->data.mtd.size)) {
|
|
printf("Size not aligned with a block (0x%x)\n",
|
|
mtd->erasesize);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dfu->get_medium_size = dfu_get_medium_size_mtd;
|
|
dfu->read_medium = dfu_read_medium_mtd;
|
|
dfu->write_medium = dfu_write_medium_mtd;
|
|
dfu->flush_medium = dfu_flush_medium_mtd;
|
|
dfu->poll_timeout = dfu_polltimeout_mtd;
|
|
|
|
/* initial state */
|
|
dfu->inited = 0;
|
|
|
|
return 0;
|
|
}
|