mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
5eb9a78fcd
dram_init_banksize() can be common used by all SoCs, move it into sdram_common.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
95 lines
2.2 KiB
C
95 lines
2.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2016 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch-rockchip/bootrom.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/arch-rockchip/grf_rk3328.h>
|
|
#include <asm/arch-rockchip/uart.h>
|
|
#include <asm/armv8/mmu.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define CRU_BASE 0xFF440000
|
|
#define GRF_BASE 0xFF100000
|
|
#define UART2_BASE 0xFF130000
|
|
|
|
const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
|
|
[BROM_BOOTSOURCE_EMMC] = "rksdmmc@ff520000",
|
|
[BROM_BOOTSOURCE_SD] = "rksdmmc@ff500000",
|
|
};
|
|
|
|
static struct mm_region rk3328_mem_map[] = {
|
|
{
|
|
.virt = 0x0UL,
|
|
.phys = 0x0UL,
|
|
.size = 0xff000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_INNER_SHARE
|
|
}, {
|
|
.virt = 0xff000000UL,
|
|
.phys = 0xff000000UL,
|
|
.size = 0x1000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* List terminator */
|
|
0,
|
|
}
|
|
};
|
|
|
|
struct mm_region *mem_map = rk3328_mem_map;
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
/* We do some SoC one time setting here. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
void board_debug_uart_init(void)
|
|
{
|
|
struct rk3328_grf_regs * const grf = (void *)GRF_BASE;
|
|
struct rk_uart * const uart = (void *)UART2_BASE;
|
|
enum{
|
|
GPIO2A0_SEL_SHIFT = 0,
|
|
GPIO2A0_SEL_MASK = 3 << GPIO2A0_SEL_SHIFT,
|
|
GPIO2A0_UART2_TX_M1 = 1,
|
|
|
|
GPIO2A1_SEL_SHIFT = 2,
|
|
GPIO2A1_SEL_MASK = 3 << GPIO2A1_SEL_SHIFT,
|
|
GPIO2A1_UART2_RX_M1 = 1,
|
|
};
|
|
enum {
|
|
IOMUX_SEL_UART2_SHIFT = 0,
|
|
IOMUX_SEL_UART2_MASK = 3 << IOMUX_SEL_UART2_SHIFT,
|
|
IOMUX_SEL_UART2_M0 = 0,
|
|
IOMUX_SEL_UART2_M1,
|
|
};
|
|
|
|
/* uart_sel_clk default select 24MHz */
|
|
writel((3 << (8 + 16)) | (2 << 8), CRU_BASE + 0x148);
|
|
|
|
/* init uart baud rate 1500000 */
|
|
writel(0x83, &uart->lcr);
|
|
writel(0x1, &uart->rbr);
|
|
writel(0x3, &uart->lcr);
|
|
|
|
/* Enable early UART2 */
|
|
rk_clrsetreg(&grf->com_iomux,
|
|
IOMUX_SEL_UART2_MASK,
|
|
IOMUX_SEL_UART2_M1 << IOMUX_SEL_UART2_SHIFT);
|
|
rk_clrsetreg(&grf->gpio2a_iomux,
|
|
GPIO2A0_SEL_MASK,
|
|
GPIO2A0_UART2_TX_M1 << GPIO2A0_SEL_SHIFT);
|
|
rk_clrsetreg(&grf->gpio2a_iomux,
|
|
GPIO2A1_SEL_MASK,
|
|
GPIO2A1_UART2_RX_M1 << GPIO2A1_SEL_SHIFT);
|
|
|
|
/* enable FIFO */
|
|
writel(0x1, &uart->sfe);
|
|
}
|