mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
193a1e9f19
The non-DM version of this driver used to set BAR0 register after the calls to pci_set_region. I found out that for some strange reason the ath10k driver in kernel fails to work if this is done the other way around. I know that Linux's driver should not depend on how U-Boot does things, but for some strange reason it does and this seems to be the simplest solution. Fix it since it caused regressions on Omnia. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Stefan Roese <sr@denx.de> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Mario Six <mario.six@gdsys.cc> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Phil Sutter <phil@nwl.cc> Cc: VlaoMao <vlaomao@gmail.com> Tested-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
519 lines
14 KiB
C
519 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* PCIe driver for Marvell MVEBU SoCs
|
|
*
|
|
* Based on Barebox drivers/pci/pci-mvebu.c
|
|
*
|
|
* Ported to U-Boot by:
|
|
* Anton Schubert <anton.schubert@gmx.de>
|
|
* Stefan Roese <sr@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/device-internal.h>
|
|
#include <dm/lists.h>
|
|
#include <dm/of_access.h>
|
|
#include <pci.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/mbus.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* PCIe unit register offsets */
|
|
#define SELECT(x, n) ((x >> n) & 1UL)
|
|
|
|
#define PCIE_DEV_ID_OFF 0x0000
|
|
#define PCIE_CMD_OFF 0x0004
|
|
#define PCIE_DEV_REV_OFF 0x0008
|
|
#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
|
|
#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
|
|
#define PCIE_CAPAB_OFF 0x0060
|
|
#define PCIE_CTRL_STAT_OFF 0x0068
|
|
#define PCIE_HEADER_LOG_4_OFF 0x0128
|
|
#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
|
|
#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
|
|
#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
|
|
#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
|
|
#define PCIE_WIN5_CTRL_OFF 0x1880
|
|
#define PCIE_WIN5_BASE_OFF 0x1884
|
|
#define PCIE_WIN5_REMAP_OFF 0x188c
|
|
#define PCIE_CONF_ADDR_OFF 0x18f8
|
|
#define PCIE_CONF_ADDR_EN BIT(31)
|
|
#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
|
|
#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
|
|
#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
|
|
#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
|
|
#define PCIE_CONF_ADDR(dev, reg) \
|
|
(PCIE_CONF_BUS(PCI_BUS(dev)) | PCIE_CONF_DEV(PCI_DEV(dev)) | \
|
|
PCIE_CONF_FUNC(PCI_FUNC(dev)) | PCIE_CONF_REG(reg) | \
|
|
PCIE_CONF_ADDR_EN)
|
|
#define PCIE_CONF_DATA_OFF 0x18fc
|
|
#define PCIE_MASK_OFF 0x1910
|
|
#define PCIE_MASK_ENABLE_INTS (0xf << 24)
|
|
#define PCIE_CTRL_OFF 0x1a00
|
|
#define PCIE_CTRL_X1_MODE BIT(0)
|
|
#define PCIE_STAT_OFF 0x1a04
|
|
#define PCIE_STAT_BUS (0xff << 8)
|
|
#define PCIE_STAT_DEV (0x1f << 16)
|
|
#define PCIE_STAT_LINK_DOWN BIT(0)
|
|
#define PCIE_DEBUG_CTRL 0x1a60
|
|
#define PCIE_DEBUG_SOFT_RESET BIT(20)
|
|
|
|
struct mvebu_pcie {
|
|
struct pci_controller hose;
|
|
void __iomem *base;
|
|
void __iomem *membase;
|
|
struct resource mem;
|
|
void __iomem *iobase;
|
|
u32 port;
|
|
u32 lane;
|
|
int devfn;
|
|
u32 lane_mask;
|
|
pci_dev_t dev;
|
|
char name[16];
|
|
unsigned int mem_target;
|
|
unsigned int mem_attr;
|
|
};
|
|
|
|
/*
|
|
* MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped
|
|
* into SoCs address space. Each controller will map 128M of MEM
|
|
* and 64K of I/O space when registered.
|
|
*/
|
|
static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE;
|
|
#define PCIE_MEM_SIZE (128 << 20)
|
|
|
|
static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie)
|
|
{
|
|
u32 val;
|
|
val = readl(pcie->base + PCIE_STAT_OFF);
|
|
return !(val & PCIE_STAT_LINK_DOWN);
|
|
}
|
|
|
|
static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie *pcie, int busno)
|
|
{
|
|
u32 stat;
|
|
|
|
stat = readl(pcie->base + PCIE_STAT_OFF);
|
|
stat &= ~PCIE_STAT_BUS;
|
|
stat |= busno << 8;
|
|
writel(stat, pcie->base + PCIE_STAT_OFF);
|
|
}
|
|
|
|
static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie *pcie, int devno)
|
|
{
|
|
u32 stat;
|
|
|
|
stat = readl(pcie->base + PCIE_STAT_OFF);
|
|
stat &= ~PCIE_STAT_DEV;
|
|
stat |= devno << 16;
|
|
writel(stat, pcie->base + PCIE_STAT_OFF);
|
|
}
|
|
|
|
static int mvebu_pcie_get_local_bus_nr(struct mvebu_pcie *pcie)
|
|
{
|
|
u32 stat;
|
|
|
|
stat = readl(pcie->base + PCIE_STAT_OFF);
|
|
return (stat & PCIE_STAT_BUS) >> 8;
|
|
}
|
|
|
|
static int mvebu_pcie_get_local_dev_nr(struct mvebu_pcie *pcie)
|
|
{
|
|
u32 stat;
|
|
|
|
stat = readl(pcie->base + PCIE_STAT_OFF);
|
|
return (stat & PCIE_STAT_DEV) >> 16;
|
|
}
|
|
|
|
static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose)
|
|
{
|
|
return container_of(hose, struct mvebu_pcie, hose);
|
|
}
|
|
|
|
static int mvebu_pcie_read_config(struct udevice *bus, pci_dev_t bdf,
|
|
uint offset, ulong *valuep,
|
|
enum pci_size_t size)
|
|
{
|
|
struct mvebu_pcie *pcie = dev_get_platdata(bus);
|
|
int local_bus = PCI_BUS(pcie->dev);
|
|
int local_dev = PCI_DEV(pcie->dev);
|
|
u32 reg;
|
|
u32 data;
|
|
|
|
debug("PCIE CFG read: (b,d,f)=(%2d,%2d,%2d) ",
|
|
PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
|
|
|
|
/* Only allow one other device besides the local one on the local bus */
|
|
if (PCI_BUS(bdf) == local_bus && PCI_DEV(bdf) != local_dev) {
|
|
if (local_dev == 0 && PCI_DEV(bdf) != 1) {
|
|
debug("- out of range\n");
|
|
/*
|
|
* If local dev is 0, the first other dev can
|
|
* only be 1
|
|
*/
|
|
*valuep = pci_get_ff(size);
|
|
return 0;
|
|
} else if (local_dev != 0 && PCI_DEV(bdf) != 0) {
|
|
debug("- out of range\n");
|
|
/*
|
|
* If local dev is not 0, the first other dev can
|
|
* only be 0
|
|
*/
|
|
*valuep = pci_get_ff(size);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* write address */
|
|
reg = PCIE_CONF_ADDR(bdf, offset);
|
|
writel(reg, pcie->base + PCIE_CONF_ADDR_OFF);
|
|
data = readl(pcie->base + PCIE_CONF_DATA_OFF);
|
|
debug("(addr,val)=(0x%04x, 0x%08x)\n", offset, data);
|
|
*valuep = pci_conv_32_to_size(data, offset, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_pcie_write_config(struct udevice *bus, pci_dev_t bdf,
|
|
uint offset, ulong value,
|
|
enum pci_size_t size)
|
|
{
|
|
struct mvebu_pcie *pcie = dev_get_platdata(bus);
|
|
int local_bus = PCI_BUS(pcie->dev);
|
|
int local_dev = PCI_DEV(pcie->dev);
|
|
u32 data;
|
|
|
|
debug("PCIE CFG write: (b,d,f)=(%2d,%2d,%2d) ",
|
|
PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
|
|
debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value);
|
|
|
|
/* Only allow one other device besides the local one on the local bus */
|
|
if (PCI_BUS(bdf) == local_bus && PCI_DEV(bdf) != local_dev) {
|
|
if (local_dev == 0 && PCI_DEV(bdf) != 1) {
|
|
/*
|
|
* If local dev is 0, the first other dev can
|
|
* only be 1
|
|
*/
|
|
return 0;
|
|
} else if (local_dev != 0 && PCI_DEV(bdf) != 0) {
|
|
/*
|
|
* If local dev is not 0, the first other dev can
|
|
* only be 0
|
|
*/
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
writel(PCIE_CONF_ADDR(bdf, offset), pcie->base + PCIE_CONF_ADDR_OFF);
|
|
data = pci_conv_size_to_32(0, value, offset, size);
|
|
writel(data, pcie->base + PCIE_CONF_DATA_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Setup PCIE BARs and Address Decode Wins:
|
|
* BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
|
|
* WIN[0-3] -> DRAM bank[0-3]
|
|
*/
|
|
static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie)
|
|
{
|
|
const struct mbus_dram_target_info *dram = mvebu_mbus_dram_info();
|
|
u32 size;
|
|
int i;
|
|
|
|
/* First, disable and clear BARs and windows. */
|
|
for (i = 1; i < 3; i++) {
|
|
writel(0, pcie->base + PCIE_BAR_CTRL_OFF(i));
|
|
writel(0, pcie->base + PCIE_BAR_LO_OFF(i));
|
|
writel(0, pcie->base + PCIE_BAR_HI_OFF(i));
|
|
}
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
writel(0, pcie->base + PCIE_WIN04_CTRL_OFF(i));
|
|
writel(0, pcie->base + PCIE_WIN04_BASE_OFF(i));
|
|
writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
|
|
}
|
|
|
|
writel(0, pcie->base + PCIE_WIN5_CTRL_OFF);
|
|
writel(0, pcie->base + PCIE_WIN5_BASE_OFF);
|
|
writel(0, pcie->base + PCIE_WIN5_REMAP_OFF);
|
|
|
|
/* Setup windows for DDR banks. Count total DDR size on the fly. */
|
|
size = 0;
|
|
for (i = 0; i < dram->num_cs; i++) {
|
|
const struct mbus_dram_window *cs = dram->cs + i;
|
|
|
|
writel(cs->base & 0xffff0000,
|
|
pcie->base + PCIE_WIN04_BASE_OFF(i));
|
|
writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
|
|
writel(((cs->size - 1) & 0xffff0000) |
|
|
(cs->mbus_attr << 8) |
|
|
(dram->mbus_dram_target_id << 4) | 1,
|
|
pcie->base + PCIE_WIN04_CTRL_OFF(i));
|
|
|
|
size += cs->size;
|
|
}
|
|
|
|
/* Round up 'size' to the nearest power of two. */
|
|
if ((size & (size - 1)) != 0)
|
|
size = 1 << fls(size);
|
|
|
|
/* Setup BAR[1] to all DRAM banks. */
|
|
writel(dram->cs[0].base | 0xc, pcie->base + PCIE_BAR_LO_OFF(1));
|
|
writel(0, pcie->base + PCIE_BAR_HI_OFF(1));
|
|
writel(((size - 1) & 0xffff0000) | 0x1,
|
|
pcie->base + PCIE_BAR_CTRL_OFF(1));
|
|
}
|
|
|
|
static int mvebu_pcie_probe(struct udevice *dev)
|
|
{
|
|
struct mvebu_pcie *pcie = dev_get_platdata(dev);
|
|
struct udevice *ctlr = pci_get_controller(dev);
|
|
struct pci_controller *hose = dev_get_uclass_priv(ctlr);
|
|
static int bus;
|
|
u32 reg;
|
|
|
|
debug("%s: PCIe %d.%d - up, base %08x\n", __func__,
|
|
pcie->port, pcie->lane, (u32)pcie->base);
|
|
|
|
/* Read Id info and local bus/dev */
|
|
debug("direct conf read %08x, local bus %d, local dev %d\n",
|
|
readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie),
|
|
mvebu_pcie_get_local_dev_nr(pcie));
|
|
|
|
mvebu_pcie_set_local_bus_nr(pcie, bus);
|
|
mvebu_pcie_set_local_dev_nr(pcie, 0);
|
|
pcie->dev = PCI_BDF(bus, 0, 0);
|
|
|
|
pcie->mem.start = (u32)mvebu_pcie_membase;
|
|
pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1;
|
|
mvebu_pcie_membase += PCIE_MEM_SIZE;
|
|
|
|
if (mvebu_mbus_add_window_by_id(pcie->mem_target, pcie->mem_attr,
|
|
(phys_addr_t)pcie->mem.start,
|
|
PCIE_MEM_SIZE)) {
|
|
printf("PCIe unable to add mbus window for mem at %08x+%08x\n",
|
|
(u32)pcie->mem.start, PCIE_MEM_SIZE);
|
|
}
|
|
|
|
/* Setup windows and configure host bridge */
|
|
mvebu_pcie_setup_wins(pcie);
|
|
|
|
/* Master + slave enable. */
|
|
reg = readl(pcie->base + PCIE_CMD_OFF);
|
|
reg |= PCI_COMMAND_MEMORY;
|
|
reg |= PCI_COMMAND_MASTER;
|
|
reg |= BIT(10); /* disable interrupts */
|
|
writel(reg, pcie->base + PCIE_CMD_OFF);
|
|
|
|
/* PCI memory space */
|
|
pci_set_region(hose->regions + 0, pcie->mem.start,
|
|
pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM);
|
|
pci_set_region(hose->regions + 1,
|
|
0, 0,
|
|
gd->ram_size,
|
|
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
|
|
hose->region_count = 2;
|
|
|
|
/* Set BAR0 to internal registers */
|
|
writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0));
|
|
writel(0, pcie->base + PCIE_BAR_HI_OFF(0));
|
|
|
|
bus++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_pcie_port_parse_dt(ofnode node, struct mvebu_pcie *pcie)
|
|
{
|
|
const u32 *addr;
|
|
int len;
|
|
|
|
addr = ofnode_get_property(node, "assigned-addresses", &len);
|
|
if (!addr) {
|
|
pr_err("property \"assigned-addresses\" not found");
|
|
return -FDT_ERR_NOTFOUND;
|
|
}
|
|
|
|
pcie->base = (void *)(fdt32_to_cpu(addr[2]) + SOC_REGS_PHY_BASE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03)
|
|
#define DT_TYPE_IO 0x1
|
|
#define DT_TYPE_MEM32 0x2
|
|
#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
|
|
#define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF)
|
|
|
|
static int mvebu_get_tgt_attr(ofnode node, int devfn,
|
|
unsigned long type,
|
|
unsigned int *tgt,
|
|
unsigned int *attr)
|
|
{
|
|
const int na = 3, ns = 2;
|
|
const __be32 *range;
|
|
int rlen, nranges, rangesz, pna, i;
|
|
|
|
*tgt = -1;
|
|
*attr = -1;
|
|
|
|
range = ofnode_get_property(node, "ranges", &rlen);
|
|
if (!range)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Linux uses of_n_addr_cells() to get the number of address cells
|
|
* here. Currently this function is only available in U-Boot when
|
|
* CONFIG_OF_LIVE is enabled. Until this is enabled for MVEBU in
|
|
* general, lets't hardcode the "pna" value in the U-Boot code.
|
|
*/
|
|
pna = 2; /* hardcoded for now because of lack of of_n_addr_cells() */
|
|
rangesz = pna + na + ns;
|
|
nranges = rlen / sizeof(__be32) / rangesz;
|
|
|
|
for (i = 0; i < nranges; i++, range += rangesz) {
|
|
u32 flags = of_read_number(range, 1);
|
|
u32 slot = of_read_number(range + 1, 1);
|
|
u64 cpuaddr = of_read_number(range + na, pna);
|
|
unsigned long rtype;
|
|
|
|
if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
|
|
rtype = IORESOURCE_IO;
|
|
else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
|
|
rtype = IORESOURCE_MEM;
|
|
else
|
|
continue;
|
|
|
|
/*
|
|
* The Linux code used PCI_SLOT() here, which expects devfn
|
|
* in bits 7..0. PCI_DEV() in U-Boot is similar to PCI_SLOT(),
|
|
* only expects devfn in 15..8, where its saved in this driver.
|
|
*/
|
|
if (slot == PCI_DEV(devfn) && type == rtype) {
|
|
*tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
|
|
*attr = DT_CPUADDR_TO_ATTR(cpuaddr);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
static int mvebu_pcie_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct mvebu_pcie *pcie = dev_get_platdata(dev);
|
|
int ret = 0;
|
|
|
|
/* Get port number, lane number and memory target / attr */
|
|
if (ofnode_read_u32(dev_ofnode(dev), "marvell,pcie-port",
|
|
&pcie->port)) {
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
if (ofnode_read_u32(dev_ofnode(dev), "marvell,pcie-lane", &pcie->lane))
|
|
pcie->lane = 0;
|
|
|
|
sprintf(pcie->name, "pcie%d.%d", pcie->port, pcie->lane);
|
|
|
|
/* pci_get_devfn() returns devfn in bits 15..8, see PCI_DEV usage */
|
|
pcie->devfn = pci_get_devfn(dev);
|
|
if (pcie->devfn < 0) {
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
ret = mvebu_get_tgt_attr(dev_ofnode(dev->parent), pcie->devfn,
|
|
IORESOURCE_MEM,
|
|
&pcie->mem_target, &pcie->mem_attr);
|
|
if (ret < 0) {
|
|
printf("%s: cannot get tgt/attr for mem window\n", pcie->name);
|
|
goto err;
|
|
}
|
|
|
|
/* Parse PCIe controller register base from DT */
|
|
ret = mvebu_pcie_port_parse_dt(dev_ofnode(dev), pcie);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* Check link and skip ports that have no link */
|
|
if (!mvebu_pcie_link_up(pcie)) {
|
|
debug("%s: %s - down\n", __func__, pcie->name);
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static const struct dm_pci_ops mvebu_pcie_ops = {
|
|
.read_config = mvebu_pcie_read_config,
|
|
.write_config = mvebu_pcie_write_config,
|
|
};
|
|
|
|
static struct driver pcie_mvebu_drv = {
|
|
.name = "pcie_mvebu",
|
|
.id = UCLASS_PCI,
|
|
.ops = &mvebu_pcie_ops,
|
|
.probe = mvebu_pcie_probe,
|
|
.ofdata_to_platdata = mvebu_pcie_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct mvebu_pcie),
|
|
};
|
|
|
|
/*
|
|
* Use a MISC device to bind the n instances (child nodes) of the
|
|
* PCIe base controller in UCLASS_PCI.
|
|
*/
|
|
static int mvebu_pcie_bind(struct udevice *parent)
|
|
{
|
|
struct mvebu_pcie *pcie;
|
|
struct uclass_driver *drv;
|
|
struct udevice *dev;
|
|
ofnode subnode;
|
|
|
|
/* Lookup eth driver */
|
|
drv = lists_uclass_lookup(UCLASS_PCI);
|
|
if (!drv) {
|
|
puts("Cannot find PCI driver\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
ofnode_for_each_subnode(subnode, dev_ofnode(parent)) {
|
|
if (!ofnode_is_available(subnode))
|
|
continue;
|
|
|
|
pcie = calloc(1, sizeof(*pcie));
|
|
if (!pcie)
|
|
return -ENOMEM;
|
|
|
|
/* Create child device UCLASS_PCI and bind it */
|
|
device_bind_ofnode(parent, &pcie_mvebu_drv, pcie->name, pcie,
|
|
subnode, &dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id mvebu_pcie_ids[] = {
|
|
{ .compatible = "marvell,armada-xp-pcie" },
|
|
{ .compatible = "marvell,armada-370-pcie" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pcie_mvebu_base) = {
|
|
.name = "pcie_mvebu_base",
|
|
.id = UCLASS_MISC,
|
|
.of_match = mvebu_pcie_ids,
|
|
.bind = mvebu_pcie_bind,
|
|
};
|