u-boot/drivers/serial/serial_pxa.c
Mike Frysinger 1c9a5606d8 serial: drop useless ctlr field
The multi serial support has a "ctlr" field which almost no one uses,
but everyone is forced to set to useless strings.  So punt it.

Funny enough, the only code that actually reads this field (the mpc8xx
driver) has a typo where it meant to look for the SCC driver.  Fix it
while converting the check to use the name field.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Heiko Schocher <hs@denx.de>
CC: Anatolij Gustschin <agust@denx.de>
CC: Tom Rix <Tom.Rix@windriver.com>
CC: Minkyu Kang <mk7.kang@samsung.com>
CC: Craig Nauman <cnauman@diagraph.com>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Prafulla Wadaskar <prafulla@marvell.com>
CC: Mahavir Jain <mjain@marvell.com>
2011-07-26 16:38:05 +02:00

389 lines
7.8 KiB
C

/*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <common.h>
#include <watchdog.h>
#include <serial.h>
#include <asm/arch/pxa-regs.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
#define FFUART_INDEX 0
#define BTUART_INDEX 1
#define STUART_INDEX 2
#ifndef CONFIG_SERIAL_MULTI
#if defined (CONFIG_FFUART)
#define UART_INDEX FFUART_INDEX
#elif defined (CONFIG_BTUART)
#define UART_INDEX BTUART_INDEX
#elif defined (CONFIG_STUART)
#define UART_INDEX STUART_INDEX
#else
#error "Bad: you didn't configure serial ..."
#endif
#endif
void pxa_setbrg_dev (unsigned int uart_index)
{
unsigned int quot = 0;
if (gd->baudrate == 1200)
quot = 768;
else if (gd->baudrate == 9600)
quot = 96;
else if (gd->baudrate == 19200)
quot = 48;
else if (gd->baudrate == 38400)
quot = 24;
else if (gd->baudrate == 57600)
quot = 16;
else if (gd->baudrate == 115200)
quot = 8;
else
hang ();
switch (uart_index) {
case FFUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
writel(readl(CKENA) | CKENA_22_FFUART, CKENA);
#else
writel(readl(CKEN) | CKEN6_FFUART, CKEN);
#endif /* CONFIG_CPU_MONAHANS */
writel(0, FFIER); /* Disable for now */
writel(0, FFFCR); /* No fifos enabled */
/* set baud rate */
writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, FFLCR);
writel(quot & 0xff, FFDLL);
writel(quot >> 8, FFDLH);
writel(LCR_WLS0 | LCR_WLS1, FFLCR);
writel(IER_UUE, FFIER); /* Enable FFUART */
break;
case BTUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
writel(readl(CKENA) | CKENA_21_BTUART, CKENA);
#else
writel(readl(CKEN) | CKEN7_BTUART, CKEN);
#endif /* CONFIG_CPU_MONAHANS */
writel(0, BTIER);
writel(0, BTFCR);
/* set baud rate */
writel(LCR_DLAB, BTLCR);
writel(quot & 0xff, BTDLL);
writel(quot >> 8, BTDLH);
writel(LCR_WLS0 | LCR_WLS1, BTLCR);
writel(IER_UUE, BTIER); /* Enable BFUART */
break;
case STUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
writel(readl(CKENA) | CKENA_23_STUART, CKENA);
#else
writel(readl(CKEN) | CKEN5_STUART, CKEN);
#endif /* CONFIG_CPU_MONAHANS */
writel(0, STIER);
writel(0, STFCR);
/* set baud rate */
writel(LCR_DLAB, STLCR);
writel(quot & 0xff, STDLL);
writel(quot >> 8, STDLH);
writel(LCR_WLS0 | LCR_WLS1, STLCR);
writel(IER_UUE, STIER); /* Enable STUART */
break;
default:
hang();
}
}
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*
*/
int pxa_init_dev (unsigned int uart_index)
{
pxa_setbrg_dev (uart_index);
return (0);
}
/*
* Output a single byte to the serial port.
*/
void pxa_putc_dev (unsigned int uart_index,const char c)
{
switch (uart_index) {
case FFUART_INDEX:
/* wait for room in the tx FIFO on FFUART */
while ((readl(FFLSR) & LSR_TEMT) == 0)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
writel(c, FFTHR);
break;
case BTUART_INDEX:
while ((readl(BTLSR) & LSR_TEMT) == 0)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
writel(c, BTTHR);
break;
case STUART_INDEX:
while ((readl(STLSR) & LSR_TEMT) == 0)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
writel(c, STTHR);
break;
}
/* If \n, also do \r */
if (c == '\n')
pxa_putc_dev (uart_index,'\r');
}
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
int pxa_tstc_dev (unsigned int uart_index)
{
switch (uart_index) {
case FFUART_INDEX:
return readl(FFLSR) & LSR_DR;
case BTUART_INDEX:
return readl(BTLSR) & LSR_DR;
case STUART_INDEX:
return readl(STLSR) & LSR_DR;
}
return -1;
}
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
int pxa_getc_dev (unsigned int uart_index)
{
switch (uart_index) {
case FFUART_INDEX:
while (!(readl(FFLSR) & LSR_DR))
/* Reset HW Watchdog, if needed */
WATCHDOG_RESET();
return (char) readl(FFRBR) & 0xff;
case BTUART_INDEX:
while (!(readl(BTLSR) & LSR_DR))
/* Reset HW Watchdog, if needed */
WATCHDOG_RESET();
return (char) readl(BTRBR) & 0xff;
case STUART_INDEX:
while (!(readl(STLSR) & LSR_DR))
/* Reset HW Watchdog, if needed */
WATCHDOG_RESET();
return (char) readl(STRBR) & 0xff;
}
return -1;
}
void
pxa_puts_dev (unsigned int uart_index,const char *s)
{
while (*s) {
pxa_putc_dev (uart_index,*s++);
}
}
#if defined (CONFIG_FFUART)
static int ffuart_init(void)
{
return pxa_init_dev(FFUART_INDEX);
}
static void ffuart_setbrg(void)
{
return pxa_setbrg_dev(FFUART_INDEX);
}
static void ffuart_putc(const char c)
{
return pxa_putc_dev(FFUART_INDEX,c);
}
static void ffuart_puts(const char *s)
{
return pxa_puts_dev(FFUART_INDEX,s);
}
static int ffuart_getc(void)
{
return pxa_getc_dev(FFUART_INDEX);
}
static int ffuart_tstc(void)
{
return pxa_tstc_dev(FFUART_INDEX);
}
struct serial_device serial_ffuart_device =
{
"serial_ffuart",
ffuart_init,
NULL,
ffuart_setbrg,
ffuart_getc,
ffuart_tstc,
ffuart_putc,
ffuart_puts,
};
#endif
#if defined (CONFIG_BTUART)
static int btuart_init(void)
{
return pxa_init_dev(BTUART_INDEX);
}
static void btuart_setbrg(void)
{
return pxa_setbrg_dev(BTUART_INDEX);
}
static void btuart_putc(const char c)
{
return pxa_putc_dev(BTUART_INDEX,c);
}
static void btuart_puts(const char *s)
{
return pxa_puts_dev(BTUART_INDEX,s);
}
static int btuart_getc(void)
{
return pxa_getc_dev(BTUART_INDEX);
}
static int btuart_tstc(void)
{
return pxa_tstc_dev(BTUART_INDEX);
}
struct serial_device serial_btuart_device =
{
"serial_btuart",
btuart_init,
NULL,
btuart_setbrg,
btuart_getc,
btuart_tstc,
btuart_putc,
btuart_puts,
};
#endif
#if defined (CONFIG_STUART)
static int stuart_init(void)
{
return pxa_init_dev(STUART_INDEX);
}
static void stuart_setbrg(void)
{
return pxa_setbrg_dev(STUART_INDEX);
}
static void stuart_putc(const char c)
{
return pxa_putc_dev(STUART_INDEX,c);
}
static void stuart_puts(const char *s)
{
return pxa_puts_dev(STUART_INDEX,s);
}
static int stuart_getc(void)
{
return pxa_getc_dev(STUART_INDEX);
}
static int stuart_tstc(void)
{
return pxa_tstc_dev(STUART_INDEX);
}
struct serial_device serial_stuart_device =
{
"serial_stuart",
stuart_init,
NULL,
stuart_setbrg,
stuart_getc,
stuart_tstc,
stuart_putc,
stuart_puts,
};
#endif
#ifndef CONFIG_SERIAL_MULTI
inline int serial_init(void) {
return (pxa_init_dev(UART_INDEX));
}
void serial_setbrg(void) {
pxa_setbrg_dev(UART_INDEX);
}
int serial_getc(void) {
return(pxa_getc_dev(UART_INDEX));
}
int serial_tstc(void) {
return(pxa_tstc_dev(UART_INDEX));
}
void serial_putc(const char c) {
pxa_putc_dev(UART_INDEX,c);
}
void serial_puts(const char *s) {
pxa_puts_dev(UART_INDEX,s);
}
#endif /* CONFIG_SERIAL_MULTI */