mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
f6ae1ca058
This patch includes following changes : * Adds gpio pin numbering support for EXYNOS SOCs. To have consistent 0..n-1 GPIO numbering the banks are divided into different parts where ever they have holes in them. * Rename GPIO definitions from GPIO_... to S5P_GPIO_... These changes were done to enable cmd_gpio for EXYNOS and cmd_gpio has GPIO_INPUT same as s5p_gpio driver and hence getting a error during compilation. * Adds support for name to gpio conversion in s5p_gpio to enable gpio command EXYNOS SoCs. Function has been added to asm/gpio.h to decode the input gpio name to gpio number. Example: SMDK5420 # gpio set gpa00 Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
319 lines
6.9 KiB
C
319 lines
6.9 KiB
C
/*
|
|
* (C) Copyright 2009 Samsung Electronics
|
|
* Minkyu Kang <mk7.kang@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
#define S5P_GPIO_GET_PIN(x) (x % GPIO_PER_BANK)
|
|
|
|
#define CON_MASK(x) (0xf << ((x) << 2))
|
|
#define CON_SFR(x, v) ((v) << ((x) << 2))
|
|
|
|
#define DAT_MASK(x) (0x1 << (x))
|
|
#define DAT_SET(x) (0x1 << (x))
|
|
|
|
#define PULL_MASK(x) (0x3 << ((x) << 1))
|
|
#define PULL_MODE(x, v) ((v) << ((x) << 1))
|
|
|
|
#define DRV_MASK(x) (0x3 << ((x) << 1))
|
|
#define DRV_SET(x, m) ((m) << ((x) << 1))
|
|
#define RATE_MASK(x) (0x1 << (x + 16))
|
|
#define RATE_SET(x) (0x1 << (x + 16))
|
|
|
|
#define name_to_gpio(n) s5p_name_to_gpio(n)
|
|
static inline int s5p_name_to_gpio(const char *name)
|
|
{
|
|
unsigned num, irregular_set_number, irregular_bank_base;
|
|
const struct gpio_name_num_table *tabp;
|
|
char this_bank, bank_name, irregular_bank_name;
|
|
char *endp;
|
|
|
|
/*
|
|
* The gpio name starts with either 'g' or 'gp' followed by the bank
|
|
* name character. Skip one or two characters depending on the prefix.
|
|
*/
|
|
if (name[0] == 'g' && name[1] == 'p')
|
|
name += 2;
|
|
else if (name[0] == 'g')
|
|
name++;
|
|
else
|
|
return -1; /* Name must start with 'g' */
|
|
|
|
bank_name = *name++;
|
|
if (!*name)
|
|
return -1; /* At least one digit is required/expected. */
|
|
|
|
/*
|
|
* On both exynos5 and exynos5420 architectures there is a bank of
|
|
* GPIOs which does not fall into the regular address pattern. Those
|
|
* banks are c4 on Exynos5 and y7 on Exynos5420. The rest of the below
|
|
* assignments help to handle these irregularities.
|
|
*/
|
|
#if defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5)
|
|
if (cpu_is_exynos5()) {
|
|
if (proid_is_exynos5420()) {
|
|
tabp = exynos5420_gpio_table;
|
|
irregular_bank_name = 'y';
|
|
irregular_set_number = '7';
|
|
irregular_bank_base = EXYNOS5420_GPIO_Y70;
|
|
} else {
|
|
tabp = exynos5_gpio_table;
|
|
irregular_bank_name = 'c';
|
|
irregular_set_number = '4';
|
|
irregular_bank_base = EXYNOS5_GPIO_C40;
|
|
}
|
|
} else {
|
|
if (proid_is_exynos4412())
|
|
tabp = exynos4x12_gpio_table;
|
|
else
|
|
tabp = exynos4_gpio_table;
|
|
irregular_bank_name = 0;
|
|
irregular_set_number = 0;
|
|
irregular_bank_base = 0;
|
|
}
|
|
#else
|
|
if (cpu_is_s5pc110())
|
|
tabp = s5pc110_gpio_table;
|
|
else
|
|
tabp = s5pc100_gpio_table;
|
|
irregular_bank_name = 0;
|
|
irregular_set_number = 0;
|
|
irregular_bank_base = 0;
|
|
#endif
|
|
|
|
this_bank = tabp->bank;
|
|
do {
|
|
if (bank_name == this_bank) {
|
|
unsigned pin_index; /* pin number within the bank */
|
|
if ((bank_name == irregular_bank_name) &&
|
|
(name[0] == irregular_set_number)) {
|
|
pin_index = name[1] - '0';
|
|
/* Irregular sets have 8 pins. */
|
|
if (pin_index >= GPIO_PER_BANK)
|
|
return -1;
|
|
num = irregular_bank_base + pin_index;
|
|
} else {
|
|
pin_index = simple_strtoul(name, &endp, 8);
|
|
pin_index -= tabp->bank_offset;
|
|
/*
|
|
* Sanity check: bunk 'z' has no set number,
|
|
* for all other banks there must be exactly
|
|
* two octal digits, and the resulting number
|
|
* should not exceed the number of pins in the
|
|
* bank.
|
|
*/
|
|
if (((bank_name != 'z') && !name[1]) ||
|
|
*endp ||
|
|
(pin_index >= tabp->bank_size))
|
|
return -1;
|
|
num = tabp->base + pin_index;
|
|
}
|
|
return num;
|
|
}
|
|
this_bank = (++tabp)->bank;
|
|
} while (this_bank);
|
|
|
|
return -1;
|
|
}
|
|
|
|
static void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
|
|
{
|
|
unsigned int value;
|
|
|
|
value = readl(&bank->con);
|
|
value &= ~CON_MASK(gpio);
|
|
value |= CON_SFR(gpio, cfg);
|
|
writel(value, &bank->con);
|
|
}
|
|
|
|
static void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
|
|
{
|
|
unsigned int value;
|
|
|
|
value = readl(&bank->dat);
|
|
value &= ~DAT_MASK(gpio);
|
|
if (en)
|
|
value |= DAT_SET(gpio);
|
|
writel(value, &bank->dat);
|
|
}
|
|
|
|
static void s5p_gpio_direction_output(struct s5p_gpio_bank *bank,
|
|
int gpio, int en)
|
|
{
|
|
s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_OUTPUT);
|
|
s5p_gpio_set_value(bank, gpio, en);
|
|
}
|
|
|
|
static void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
|
|
{
|
|
s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_INPUT);
|
|
}
|
|
|
|
static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
|
|
{
|
|
unsigned int value;
|
|
|
|
value = readl(&bank->dat);
|
|
return !!(value & DAT_MASK(gpio));
|
|
}
|
|
|
|
static void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
|
|
{
|
|
unsigned int value;
|
|
|
|
value = readl(&bank->pull);
|
|
value &= ~PULL_MASK(gpio);
|
|
|
|
switch (mode) {
|
|
case S5P_GPIO_PULL_DOWN:
|
|
case S5P_GPIO_PULL_UP:
|
|
value |= PULL_MODE(gpio, mode);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
writel(value, &bank->pull);
|
|
}
|
|
|
|
static void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
|
|
{
|
|
unsigned int value;
|
|
|
|
value = readl(&bank->drv);
|
|
value &= ~DRV_MASK(gpio);
|
|
|
|
switch (mode) {
|
|
case S5P_GPIO_DRV_1X:
|
|
case S5P_GPIO_DRV_2X:
|
|
case S5P_GPIO_DRV_3X:
|
|
case S5P_GPIO_DRV_4X:
|
|
value |= DRV_SET(gpio, mode);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
writel(value, &bank->drv);
|
|
}
|
|
|
|
static void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
|
|
{
|
|
unsigned int value;
|
|
|
|
value = readl(&bank->drv);
|
|
value &= ~RATE_MASK(gpio);
|
|
|
|
switch (mode) {
|
|
case S5P_GPIO_DRV_FAST:
|
|
case S5P_GPIO_DRV_SLOW:
|
|
value |= RATE_SET(gpio);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
writel(value, &bank->drv);
|
|
}
|
|
|
|
struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned int gpio)
|
|
{
|
|
const struct gpio_info *data;
|
|
unsigned int upto;
|
|
int i, count;
|
|
|
|
data = get_gpio_data();
|
|
count = get_bank_num();
|
|
upto = 0;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
debug("i=%d, upto=%d\n", i, upto);
|
|
if (gpio < data->max_gpio) {
|
|
struct s5p_gpio_bank *bank;
|
|
bank = (struct s5p_gpio_bank *)data->reg_addr;
|
|
bank += (gpio - upto) / GPIO_PER_BANK;
|
|
debug("gpio=%d, bank=%p\n", gpio, bank);
|
|
return bank;
|
|
}
|
|
|
|
upto = data->max_gpio;
|
|
data++;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
int s5p_gpio_get_pin(unsigned gpio)
|
|
{
|
|
return S5P_GPIO_GET_PIN(gpio);
|
|
}
|
|
|
|
/* Common GPIO API */
|
|
|
|
int gpio_request(unsigned gpio, const char *label)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int gpio_free(unsigned gpio)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int gpio_direction_input(unsigned gpio)
|
|
{
|
|
s5p_gpio_direction_input(s5p_gpio_get_bank(gpio),
|
|
s5p_gpio_get_pin(gpio));
|
|
return 0;
|
|
}
|
|
|
|
int gpio_direction_output(unsigned gpio, int value)
|
|
{
|
|
s5p_gpio_direction_output(s5p_gpio_get_bank(gpio),
|
|
s5p_gpio_get_pin(gpio), value);
|
|
return 0;
|
|
}
|
|
|
|
int gpio_get_value(unsigned gpio)
|
|
{
|
|
return (int) s5p_gpio_get_value(s5p_gpio_get_bank(gpio),
|
|
s5p_gpio_get_pin(gpio));
|
|
}
|
|
|
|
int gpio_set_value(unsigned gpio, int value)
|
|
{
|
|
s5p_gpio_set_value(s5p_gpio_get_bank(gpio),
|
|
s5p_gpio_get_pin(gpio), value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void gpio_set_pull(int gpio, int mode)
|
|
{
|
|
s5p_gpio_set_pull(s5p_gpio_get_bank(gpio),
|
|
s5p_gpio_get_pin(gpio), mode);
|
|
}
|
|
|
|
void gpio_set_drv(int gpio, int mode)
|
|
{
|
|
s5p_gpio_set_drv(s5p_gpio_get_bank(gpio),
|
|
s5p_gpio_get_pin(gpio), mode);
|
|
}
|
|
|
|
void gpio_cfg_pin(int gpio, int cfg)
|
|
{
|
|
s5p_gpio_cfg_pin(s5p_gpio_get_bank(gpio),
|
|
s5p_gpio_get_pin(gpio), cfg);
|
|
}
|
|
|
|
void gpio_set_rate(int gpio, int mode)
|
|
{
|
|
s5p_gpio_set_rate(s5p_gpio_get_bank(gpio),
|
|
s5p_gpio_get_pin(gpio), mode);
|
|
}
|