2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-25 04:23:46 +00:00
u-boot/arch/x86/include/asm/i8254.h
Heinrich Schuchardt 185f812c41 doc: replace @return by Return:
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 18:11:34 +01:00

56 lines
1.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*/
/* i8254.h Intel 8254 PIT registers */
#ifndef _ASMI386_I8254_H_
#define _ASMI386_I8254_H_
#define PIT_T0 0x00 /* PIT channel 0 count/status */
#define PIT_T1 0x01 /* PIT channel 1 count/status */
#define PIT_T2 0x02 /* PIT channel 2 count/status */
#define PIT_COMMAND 0x03 /* PIT mode control, latch and read back */
/* PIT Command Register Bit Definitions */
#define PIT_CMD_CTR0 0x00 /* Select PIT counter 0 */
#define PIT_CMD_CTR1 0x40 /* Select PIT counter 1 */
#define PIT_CMD_CTR2 0x80 /* Select PIT counter 2 */
#define PIT_CMD_LATCH 0x00 /* Counter Latch Command */
#define PIT_CMD_LOW 0x10 /* Access counter bits 7-0 */
#define PIT_CMD_HIGH 0x20 /* Access counter bits 15-8 */
#define PIT_CMD_BOTH 0x30 /* Access counter bits 15-0 in two accesses */
#define PIT_CMD_MODE0 0x00 /* Select mode 0 */
#define PIT_CMD_MODE1 0x02 /* Select mode 1 */
#define PIT_CMD_MODE2 0x04 /* Select mode 2 */
#define PIT_CMD_MODE3 0x06 /* Select mode 3 */
#define PIT_CMD_MODE4 0x08 /* Select mode 4 */
#define PIT_CMD_MODE5 0x0a /* Select mode 5 */
/* The clock frequency of the i8253/i8254 PIT */
#define PIT_TICK_RATE 1193182
/**
* i8254_enable_beep() - Start a beep using the PCAT timer
*
* This starts beeping using the legacy i8254 timer. The beep may be silenced
* after a delay with i8254_disable_beep().
*
* @frequency_hz: Frequency of beep in Hz
* Return: 0 if OK, -EINVAL if frequency_hz is 0
*/
int i8254_enable_beep(uint frequency_hz);
/**
* i8254_disable_beep() - Disable the bepper
*
* This stops any existing beep
*/
void i8254_disable_beep(void);
#endif /* _ASMI386_I8254_H_ */