mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 03:03:05 +00:00
8fceb0edf4
Add wkup_gpio pinmux setting which will be used for performing the DT fixup for hbmc node according to mux selection state, on J721E EVM, hypermux sel is tied to ·WKUP_GPIO0_8. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
791 lines
17 KiB
Text
791 lines
17 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "k3-j721e-som-p0.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
#include <dt-bindings/phy/phy-cadence.h>
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
|
|
};
|
|
|
|
gpio_keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>;
|
|
|
|
sw10: sw10 {
|
|
label = "GPIO Key USER1";
|
|
linux,code = <BTN_0>;
|
|
gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
sw11: sw11 {
|
|
label = "GPIO Key USER2";
|
|
linux,code = <BTN_1>;
|
|
gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
evm_12v0: fixedregulator-evm12v0 {
|
|
/* main supply */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "evm_12v0";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vsys_3v3: fixedregulator-vsys3v3 {
|
|
/* Output of LMS140 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&evm_12v0>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vsys_5v0: fixedregulator-vsys5v0 {
|
|
/* Output of LM5140 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys_5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&evm_12v0>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_mmc1: fixedregulator-sd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_mmc1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
vin-supply = <&vsys_3v3>;
|
|
gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
vdd_sd_dv_alt: gpio-regulator-TLV71033 {
|
|
compatible = "regulator-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
|
|
regulator-name = "tlv71033";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
vin-supply = <&vsys_5v0>;
|
|
gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
|
|
states = <1800000 0x0>,
|
|
<3300000 0x1>;
|
|
};
|
|
|
|
sound0: sound@0 {
|
|
compatible = "ti,j721e-cpb-audio";
|
|
model = "j721e-cpb";
|
|
|
|
ti,cpb-mcasp = <&mcasp10>;
|
|
ti,cpb-codec = <&pcm3168a_1>;
|
|
|
|
clocks = <&k3_clks 184 1>,
|
|
<&k3_clks 184 2>, <&k3_clks 184 4>,
|
|
<&k3_clks 157 371>,
|
|
<&k3_clks 157 400>, <&k3_clks 157 401>;
|
|
clock-names = "cpb-mcasp-auxclk",
|
|
"cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
|
|
"cpb-codec-scki",
|
|
"cpb-codec-scki-48000", "cpb-codec-scki-44100";
|
|
};
|
|
};
|
|
|
|
&main_pmx0 {
|
|
sw10_button_pins_default: sw10-button-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
|
|
>;
|
|
};
|
|
|
|
main_mmc1_pins_default: main-mmc1-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
|
|
J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
|
|
J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
|
|
J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
|
|
J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
|
|
J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
|
|
J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
|
|
J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
|
|
J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
|
|
>;
|
|
};
|
|
|
|
vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
|
|
>;
|
|
};
|
|
|
|
main_usbss0_pins_default: main-usbss0-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
|
|
J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
|
|
>;
|
|
};
|
|
|
|
main_usbss1_pins_default: main-usbss1-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
|
|
>;
|
|
};
|
|
|
|
main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
|
|
>;
|
|
};
|
|
|
|
main_i2c0_pins_default: main-i2c0-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
|
|
J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
|
|
>;
|
|
};
|
|
|
|
main_i2c1_pins_default: main-i2c1-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
|
|
J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
|
|
>;
|
|
};
|
|
|
|
main_i2c3_pins_default: main-i2c3-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
|
|
J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
|
|
>;
|
|
};
|
|
|
|
main_i2c6_pins_default: main-i2c6-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
|
|
J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
|
|
>;
|
|
};
|
|
|
|
mcasp10_pins_default: mcasp10-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
|
|
J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
|
|
J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */
|
|
J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */
|
|
J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */
|
|
J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */
|
|
J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */
|
|
J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */
|
|
J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */
|
|
>;
|
|
};
|
|
|
|
audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&wkup_pmx0 {
|
|
sw11_button_pins_default: sw11-button-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
|
|
>;
|
|
};
|
|
|
|
wkup_gpio_pins_default: wkup-gpio-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_8 */
|
|
>;
|
|
};
|
|
|
|
mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
|
|
J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
|
|
J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
|
|
J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
|
|
J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
|
|
J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
|
|
J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
|
|
J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
|
|
>;
|
|
};
|
|
|
|
mcu_cpsw_pins_default: mcu-cpsw-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
|
|
J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
|
|
J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
|
|
J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
|
|
J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
|
|
J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
|
|
J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
|
|
J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
|
|
J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
|
|
J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
|
|
J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
|
|
J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
|
|
>;
|
|
};
|
|
|
|
mcu_mdio_pins_default: mcu-mdio1-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */
|
|
J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&wkup_uart0 {
|
|
/* Wakeup UART is used by System firmware */
|
|
status = "reserved";
|
|
};
|
|
|
|
&main_uart0 {
|
|
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
|
|
};
|
|
|
|
&main_uart3 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart5 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart6 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart7 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart8 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart9 {
|
|
/* UART not brought out */
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_gpio2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_gpio3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_gpio4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_gpio5 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_gpio6 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_gpio7 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&wkup_gpio1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_sdhci0 {
|
|
/* eMMC */
|
|
non-removable;
|
|
ti,driver-strength-ohm = <50>;
|
|
disable-wp;
|
|
};
|
|
|
|
&main_sdhci1 {
|
|
/* SD/MMC */
|
|
vmmc-supply = <&vdd_mmc1>;
|
|
vqmmc-supply = <&vdd_sd_dv_alt>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_mmc1_pins_default>;
|
|
ti,driver-strength-ohm = <50>;
|
|
disable-wp;
|
|
};
|
|
|
|
&main_sdhci2 {
|
|
/* Unused */
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_serdes_mux {
|
|
idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */
|
|
};
|
|
|
|
&serdes_ln_ctrl {
|
|
idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_QSGMII_LANE2>,
|
|
<J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
|
|
<J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
|
|
<J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
|
|
<J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
|
|
<J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
|
|
};
|
|
|
|
&serdes_wiz3 {
|
|
typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
|
|
typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */
|
|
};
|
|
|
|
&serdes3 {
|
|
serdes3_usb_link: phy@0 {
|
|
reg = <0>;
|
|
cdns,num-lanes = <2>;
|
|
#phy-cells = <0>;
|
|
cdns,phy-type = <PHY_TYPE_USB3>;
|
|
resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
|
|
};
|
|
};
|
|
|
|
&usbss0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_usbss0_pins_default>;
|
|
ti,vbus-divider;
|
|
};
|
|
|
|
&usb0 {
|
|
dr_mode = "otg";
|
|
maximum-speed = "super-speed";
|
|
phys = <&serdes3_usb_link>;
|
|
phy-names = "cdns3,usb3-phy";
|
|
};
|
|
|
|
&wkup_gpio0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wkup_gpio_pins_default>;
|
|
};
|
|
|
|
&usbss1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_usbss1_pins_default>;
|
|
ti,usb2-only;
|
|
};
|
|
|
|
&usb1 {
|
|
dr_mode = "host";
|
|
maximum-speed = "high-speed";
|
|
};
|
|
|
|
&ospi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
|
|
|
|
flash@0{
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0x0>;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-max-frequency = <40000000>;
|
|
cdns,tshsl-ns = <60>;
|
|
cdns,tsd2d-ns = <60>;
|
|
cdns,tchsh-ns = <60>;
|
|
cdns,tslch-ns = <60>;
|
|
cdns,read-delay = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
&tscadc0 {
|
|
adc {
|
|
ti,adc-channels = <0 1 2 3 4 5 6 7>;
|
|
};
|
|
};
|
|
|
|
&tscadc1 {
|
|
adc {
|
|
ti,adc-channels = <0 1 2 3 4 5 6 7>;
|
|
};
|
|
};
|
|
|
|
&main_i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c0_pins_default>;
|
|
clock-frequency = <400000>;
|
|
|
|
exp1: gpio@20 {
|
|
compatible = "ti,tca6416";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
exp2: gpio@22 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
p09-hog {
|
|
/* P11 - MCASP/TRACE_MUX_S0 */
|
|
gpio-hog;
|
|
gpios = <9 GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
line-name = "MCASP/TRACE_MUX_S0";
|
|
};
|
|
|
|
p10-hog {
|
|
/* P12 - MCASP/TRACE_MUX_S1 */
|
|
gpio-hog;
|
|
gpios = <10 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "MCASP/TRACE_MUX_S1";
|
|
};
|
|
};
|
|
};
|
|
|
|
&main_i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c1_pins_default>;
|
|
clock-frequency = <400000>;
|
|
|
|
exp4: gpio@20 {
|
|
compatible = "ti,tca6408";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c1_exp4_pins_default>;
|
|
interrupt-parent = <&main_gpio1>;
|
|
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&k3_clks {
|
|
/* Confiure AUDIO_EXT_REFCLK2 pin as output */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&audi_ext_refclk2_pins_default>;
|
|
};
|
|
|
|
&main_i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c3_pins_default>;
|
|
clock-frequency = <400000>;
|
|
|
|
exp3: gpio@20 {
|
|
compatible = "ti,tca6408";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
pcm3168a_1: audio-codec@44 {
|
|
compatible = "ti,pcm3168a";
|
|
reg = <0x44>;
|
|
|
|
#sound-dai-cells = <1>;
|
|
|
|
reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
|
|
|
|
/* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */
|
|
clocks = <&k3_clks 157 371>;
|
|
clock-names = "scki";
|
|
|
|
/* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */
|
|
assigned-clocks = <&k3_clks 157 371>;
|
|
assigned-clock-parents = <&k3_clks 157 400>;
|
|
assigned-clock-rates = <24576000>; /* for 48KHz */
|
|
|
|
VDD1-supply = <&vsys_3v3>;
|
|
VDD2-supply = <&vsys_3v3>;
|
|
VCCAD1-supply = <&vsys_5v0>;
|
|
VCCAD2-supply = <&vsys_5v0>;
|
|
VCCDA1-supply = <&vsys_5v0>;
|
|
VCCDA2-supply = <&vsys_5v0>;
|
|
};
|
|
};
|
|
|
|
&main_i2c6 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c6_pins_default>;
|
|
clock-frequency = <400000>;
|
|
|
|
exp5: gpio@20 {
|
|
compatible = "ti,tca6408";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&mcu_cpsw {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
|
|
};
|
|
|
|
&davinci_mdio {
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
|
};
|
|
};
|
|
|
|
&cpsw_port1 {
|
|
phy-mode = "rgmii-rxid";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
&dss {
|
|
/*
|
|
* These clock assignments are chosen to enable the following outputs:
|
|
*
|
|
* VP0 - DisplayPort SST
|
|
* VP1 - DPI0
|
|
* VP2 - DSI
|
|
* VP3 - DPI1
|
|
*/
|
|
|
|
assigned-clocks = <&k3_clks 152 1>,
|
|
<&k3_clks 152 4>,
|
|
<&k3_clks 152 9>,
|
|
<&k3_clks 152 13>;
|
|
assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */
|
|
<&k3_clks 152 6>, /* PLL19_HSDIV0 */
|
|
<&k3_clks 152 11>, /* PLL18_HSDIV0 */
|
|
<&k3_clks 152 18>; /* PLL23_HSDIV0 */
|
|
};
|
|
|
|
&mcasp0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcasp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcasp2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcasp3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcasp4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcasp5 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcasp6 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcasp7 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcasp8 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcasp9 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcasp10 {
|
|
#sound-dai-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcasp10_pins_default>;
|
|
|
|
op-mode = <0>; /* MCASP_IIS_MODE */
|
|
tdm-slots = <2>;
|
|
auxclk-fs-ratio = <256>;
|
|
|
|
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
|
1 1 1 1
|
|
2 2 2 0
|
|
>;
|
|
tx-num-evt = <0>;
|
|
rx-num-evt = <0>;
|
|
};
|
|
|
|
&mcasp11 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&cmn_refclk1 {
|
|
clock-frequency = <100000000>;
|
|
};
|
|
|
|
&wiz0_pll1_refclk {
|
|
assigned-clocks = <&wiz0_pll1_refclk>;
|
|
assigned-clock-parents = <&cmn_refclk1>;
|
|
};
|
|
|
|
&wiz0_refclk_dig {
|
|
assigned-clocks = <&wiz0_refclk_dig>;
|
|
assigned-clock-parents = <&cmn_refclk1>;
|
|
};
|
|
|
|
&wiz1_pll1_refclk {
|
|
assigned-clocks = <&wiz1_pll1_refclk>;
|
|
assigned-clock-parents = <&cmn_refclk1>;
|
|
};
|
|
|
|
&wiz1_refclk_dig {
|
|
assigned-clocks = <&wiz1_refclk_dig>;
|
|
assigned-clock-parents = <&cmn_refclk1>;
|
|
};
|
|
|
|
&wiz2_pll1_refclk {
|
|
assigned-clocks = <&wiz2_pll1_refclk>;
|
|
assigned-clock-parents = <&cmn_refclk1>;
|
|
};
|
|
|
|
&wiz2_refclk_dig {
|
|
assigned-clocks = <&wiz2_refclk_dig>;
|
|
assigned-clock-parents = <&cmn_refclk1>;
|
|
};
|
|
|
|
&serdes0 {
|
|
assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>, <&serdes0 CDNS_SIERRA_PLL_CMNLC1>;
|
|
assigned-clock-parents = <&wiz0_pll1_refclk>, <&wiz0_pll1_refclk>;
|
|
|
|
serdes0_pcie_link: phy@0 {
|
|
reg = <0>;
|
|
cdns,num-lanes = <1>;
|
|
#phy-cells = <0>;
|
|
cdns,phy-type = <PHY_TYPE_PCIE>;
|
|
resets = <&serdes_wiz0 1>;
|
|
};
|
|
|
|
serdes0_qsgmii_link: phy@1 {
|
|
reg = <1>;
|
|
cdns,num-lanes = <1>;
|
|
#phy-cells = <0>;
|
|
cdns,phy-type = <PHY_TYPE_QSGMII>;
|
|
resets = <&serdes_wiz0 2>;
|
|
};
|
|
};
|
|
|
|
&serdes1 {
|
|
assigned-clocks = <&serdes1 CDNS_SIERRA_PLL_CMNLC>;
|
|
assigned-clock-parents = <&wiz1_pll1_refclk>;
|
|
|
|
serdes1_pcie_link: phy@0 {
|
|
reg = <0>;
|
|
cdns,num-lanes = <2>;
|
|
#phy-cells = <0>;
|
|
cdns,phy-type = <PHY_TYPE_PCIE>;
|
|
resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
|
|
};
|
|
};
|
|
|
|
&serdes2 {
|
|
assigned-clocks = <&serdes2 CDNS_SIERRA_PLL_CMNLC>;
|
|
assigned-clock-parents = <&wiz2_pll1_refclk>;
|
|
|
|
serdes2_pcie_link: phy@0 {
|
|
reg = <0>;
|
|
cdns,num-lanes = <2>;
|
|
#phy-cells = <0>;
|
|
cdns,phy-type = <PHY_TYPE_PCIE>;
|
|
resets = <&serdes_wiz2 1>, <&serdes_wiz2 2>;
|
|
};
|
|
};
|
|
|
|
&pcie0_rc {
|
|
reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
|
|
phys = <&serdes0_pcie_link>;
|
|
phy-names = "pcie-phy";
|
|
num-lanes = <1>;
|
|
};
|
|
|
|
&pcie1_rc {
|
|
reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
|
|
phys = <&serdes1_pcie_link>;
|
|
phy-names = "pcie-phy";
|
|
num-lanes = <2>;
|
|
};
|
|
|
|
&pcie2_rc {
|
|
reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>;
|
|
phys = <&serdes2_pcie_link>;
|
|
phy-names = "pcie-phy";
|
|
num-lanes = <2>;
|
|
};
|
|
|
|
&pcie0_ep {
|
|
phys = <&serdes0_pcie_link>;
|
|
phy-names = "pcie-phy";
|
|
num-lanes = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&pcie1_ep {
|
|
phys = <&serdes1_pcie_link>;
|
|
phy-names = "pcie-phy";
|
|
num-lanes = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&pcie2_ep {
|
|
phys = <&serdes2_pcie_link>;
|
|
phy-names = "pcie-phy";
|
|
num-lanes = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&pcie3_rc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&pcie3_ep {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dss {
|
|
status = "disabled";
|
|
};
|
|
|
|
&icssg0_mdio {
|
|
status = "disabled";
|
|
};
|
|
|
|
&icssg1_mdio {
|
|
status = "disabled";
|
|
};
|