Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-20 18:23:08 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/gateworks/gw_ventana/gw_ventana.c
Tim Harvey 0cba71c1eb board: gateworks: gw_ventana: add support for GPY111 PHY 
The MaxLinear GPY111 PHY is being used on some boards due to part
availability. Add support for this PHY which requires a longer reset
post-delay and RGMII delay configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20 09:30:28 +02:00

1283 lines
33 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2013 Gateworks Corporation
*
* Author: Tim Harvey <tharvey@gateworks.com>
*/
#include <command.h>
#include <common.h>
#include <fdt_support.h>
#include <gsc.h>
#include <hwconfig.h>
#include <i2c.h>
#include <miiphy.h>
#include <mtd_node.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/video.h>
#include <jffs2/load_kernel.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include "common.h"
DECLARE_GLOBAL_DATA_PTR;
/* configure eth0 PHY board-specific LED behavior */
int board_phy_config(struct phy_device *phydev)
{
unsigned short val;
ofnode node;
switch (phydev->phy_id) {
case 0x1410dd1:
puts("MV88E1510");
/*
* Page 3, Register 16: LED[2:0] Function Control Register
* LED[0] (SPD:Amber) R16_3.3:0 to 0111: on-GbE link
* LED[1] (LNK:Green) R16_3.7:4 to 0001: on-link, blink-activity
*/
phy_write(phydev, MDIO_DEVAD_NONE, 22, 3);
val = phy_read(phydev, MDIO_DEVAD_NONE, 16);
val &= 0xff00;
val |= 0x0017;
phy_write(phydev, MDIO_DEVAD_NONE, 16, val);
phy_write(phydev, MDIO_DEVAD_NONE, 22, 0);
break;
case 0x2000a231:
puts("TIDP83867 ");
/* LED configuration */
val = 0;
val |= 0x5 << 4; /* LED1(Amber;Speed) : 1000BT link */
val |= 0xb << 8; /* LED2(Green;Link/Act): blink for TX/RX act */
phy_write(phydev, MDIO_DEVAD_NONE, 24, val);
/* configure register 0x170 for ref CLKOUT */
phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x001f);
phy_write(phydev, MDIO_DEVAD_NONE, 14, 0x0170);
phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x401f);
val = phy_read(phydev, MDIO_DEVAD_NONE, 14);
val &= ~0x1f00;
val |= 0x0b00; /* chD tx clock*/
phy_write(phydev, MDIO_DEVAD_NONE, 14, val);
break;
case 0xd565a401:
puts("GPY111 ");
node = phy_get_ofnode(phydev);
if (ofnode_valid(node)) {
u32 rx_delay, tx_delay;
rx_delay = ofnode_read_u32_default(node, "rx-internal-delay-ps", 2000);
tx_delay = ofnode_read_u32_default(node, "tx-internal-delay-ps", 2000);
val = phy_read(phydev, MDIO_DEVAD_NONE, 0x17);
val &= ~((0x7 << 12) | (0x7 << 8));
val |= (rx_delay / 500) << 12;
val |= (tx_delay / 500) << 8;
phy_write(phydev, MDIO_DEVAD_NONE, 0x17, val);
}
break;
}
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
#ifdef CONFIG_MV88E61XX_SWITCH
int mv88e61xx_hw_reset(struct phy_device *phydev)
{
struct mii_dev *bus = phydev->bus;
/* GPIO[0] output, CLK125 */
debug("enabling RGMII_REFCLK\n");
bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
0x1a /*MV_SCRATCH_MISC*/,
(1 << 15) | (0x62 /*MV_GPIO_DIR*/ << 8) | 0xfe);
bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
0x1a /*MV_SCRATCH_MISC*/,
(1 << 15) | (0x68 /*MV_GPIO01_CNTL*/ << 8) | 7);
/* RGMII delay - Physical Control register bit[15:14] */
debug("setting port%d RGMII rx/tx delay\n", CONFIG_MV88E61XX_CPU_PORT);
/* forced 1000mbps full-duplex link */
bus->write(bus, 0x10 + CONFIG_MV88E61XX_CPU_PORT, 0, 1, 0xc0fe);
phydev->autoneg = AUTONEG_DISABLE;
phydev->speed = SPEED_1000;
phydev->duplex = DUPLEX_FULL;
/* LED configuration: 7:4-green (8=Activity) 3:0 amber (8=Link) */
bus->write(bus, 0x10, 0, 0x16, 0x8088);
bus->write(bus, 0x11, 0, 0x16, 0x8088);
bus->write(bus, 0x12, 0, 0x16, 0x8088);
bus->write(bus, 0x13, 0, 0x16, 0x8088);
return 0;
}
#endif // CONFIG_MV88E61XX_SWITCH
#if defined(CONFIG_VIDEO_IPUV3)
static void enable_hdmi(struct display_info_t const *dev)
{
imx_enable_hdmi_phy();
}
static int detect_lvds(struct display_info_t const *dev)
{
/* only the following boards support LVDS connectors */
switch (board_type) {
case GW52xx:
case GW53xx:
case GW54xx:
case GW560x:
case GW5905:
case GW5909:
break;
default:
return 0;
}
return (i2c_get_dev(dev->bus, dev->addr) ? 1 : 0);
}
static void enable_lvds(struct display_info_t const *dev)
{
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
/* set CH0 data width to 24bit (IOMUXC_GPR2:5 0=18bit, 1=24bit) */
u32 reg = readl(&iomux->gpr[2]);
reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
writel(reg, &iomux->gpr[2]);
/* Configure GPIO */
switch (board_type) {
case GW52xx:
case GW53xx:
case GW54xx:
if (!strncmp(dev->mode.name, "Hannstar", 8)) {
SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | DIO_PAD_CFG);
gpio_request(IMX_GPIO_NR(1, 10), "cabc");
gpio_direction_output(IMX_GPIO_NR(1, 10), 0);
} else if (!strncmp(dev->mode.name, "DLC", 3)) {
SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | DIO_PAD_CFG);
gpio_request(IMX_GPIO_NR(1, 10), "touch_rst#");
gpio_direction_output(IMX_GPIO_NR(1, 10), 1);
}
break;
default:
break;
}
/* Configure backlight */
gpio_request(IMX_GPIO_NR(1, 18), "bklt_en");
SETUP_IOMUX_PAD(PAD_SD1_CMD__GPIO1_IO18 | DIO_PAD_CFG);
gpio_direction_output(IMX_GPIO_NR(1, 18), 1);
}
struct display_info_t const displays[] = {{
/* HDMI Output */
.bus = -1,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = detect_hdmi,
.enable = enable_hdmi,
.mode = {
.name = "HDMI",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
/* Freescale MXC-LVDS1: HannStar HSD100PXN1-A00 w/ egalx_ts cont */
.bus = 2,
.addr = 0x4,
.pixfmt = IPU_PIX_FMT_LVDS666,
.detect = detect_lvds,
.enable = enable_lvds,
.mode = {
.name = "Hannstar-XGA",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
/* DLC700JMG-T-4 */
.bus = 2,
.addr = 0x38,
.detect = detect_lvds,
.enable = enable_lvds,
.pixfmt = IPU_PIX_FMT_LVDS666,
.mode = {
.name = "DLC700JMGT4",
.refresh = 60,
.xres = 1024, /* 1024x600active pixels */
.yres = 600,
.pixclock = 15385, /* 64MHz */
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
/* DLC0700XDP21LF-C-1 */
.bus = 2,
.addr = 0x38,
.detect = detect_lvds,
.enable = enable_lvds,
.pixfmt = IPU_PIX_FMT_LVDS666,
.mode = {
.name = "DLC0700XDP21LF",
.refresh = 60,
.xres = 1024, /* 1024x600active pixels */
.yres = 600,
.pixclock = 15385, /* 64MHz */
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
/* DLC800FIG-T-3 */
.bus = 2,
.addr = 0x14,
.detect = detect_lvds,
.enable = enable_lvds,
.pixfmt = IPU_PIX_FMT_LVDS666,
.mode = {
.name = "DLC800FIGT3",
.refresh = 60,
.xres = 1024, /* 1024x768 active pixels */
.yres = 768,
.pixclock = 15385, /* 64MHz */
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 2,
.addr = 0x5d,
.detect = detect_lvds,
.enable = enable_lvds,
.pixfmt = IPU_PIX_FMT_LVDS666,
.mode = {
.name = "Z101WX01",
.refresh = 60,
.xres = 1280,
.yres = 800,
.pixclock = 15385, /* 64MHz */
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
}
},
};
size_t display_count = ARRAY_SIZE(displays);
static void setup_display(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
int reg;
enable_ipu_clock();
imx_setup_hdmi();
/* Turn on LDB0,IPU,IPU DI0 clocks */
reg = __raw_readl(&mxc_ccm->CCGR3);
reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
writel(reg, &mxc_ccm->CCGR3);
/* set LDB0, LDB1 clk select to 011/011 */
reg = readl(&mxc_ccm->cs2cdr);
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
|MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
|(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->cs2cdr);
reg = readl(&mxc_ccm->cscmr2);
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
writel(reg, &mxc_ccm->cscmr2);
reg = readl(&mxc_ccm->chsccdr);
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
<<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->chsccdr);
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
|IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
|IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
|IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
|IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
|IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
|IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
|IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
|IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
writel(reg, &iomux->gpr[2]);
reg = readl(&iomux->gpr[3]);
reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
<<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
writel(reg, &iomux->gpr[3]);
}
#endif /* CONFIG_VIDEO_IPUV3 */
/*
* Most Ventana boards have a PLX PEX860x PCIe switch onboard and use its
* GPIO's as PERST# signals for its downstream ports - configure the GPIO's
* properly and assert reset for 100ms.
*/
#define MAX_PCI_DEVS 32
struct pci_dev {
pci_dev_t devfn;
struct udevice *dev;
unsigned short vendor;
unsigned short device;
unsigned short class;
unsigned short busno; /* subbordinate busno */
struct pci_dev *ppar;
};
struct pci_dev pci_devs[MAX_PCI_DEVS];
int pci_devno;
int pci_bridgeno;
void board_pci_fixup_dev(struct udevice *bus, struct udevice *udev)
{
struct pci_child_plat *pdata = dev_get_parent_plat(udev);
struct pci_dev *pdev = &pci_devs[pci_devno++];
unsigned short vendor = pdata->vendor;
unsigned short device = pdata->device;
unsigned int class = pdata->class;
pci_dev_t dev = dm_pci_get_bdf(udev);
int i;
debug("%s: %02d:%02d.%02d: %04x:%04x\n", __func__,
PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), vendor, device);
/* store array of devs for later use in device-tree fixup */
pdev->dev = udev;
pdev->devfn = dev;
pdev->vendor = vendor;
pdev->device = device;
pdev->class = class;
pdev->ppar = NULL;
if (class == PCI_CLASS_BRIDGE_PCI)
pdev->busno = ++pci_bridgeno;
else
pdev->busno = 0;
/* fixup RC - it should be 00:00.0 not 00:01.0 */
if (PCI_BUS(dev) == 0)
pdev->devfn = 0;
/* find dev's parent */
for (i = 0; i < pci_devno; i++) {
if (pci_devs[i].busno == PCI_BUS(pdev->devfn)) {
pdev->ppar = &pci_devs[i];
break;
}
}
/* assert downstream PERST# */
if (vendor == PCI_VENDOR_ID_PLX &&
(device & 0xfff0) == 0x8600 &&
PCI_DEV(dev) == 0 && PCI_FUNC(dev) == 0) {
ulong val;
debug("configuring PLX 860X downstream PERST#\n");
pci_bus_read_config(bus, dev, 0x62c, &val, PCI_SIZE_32);
val |= 0xaaa8; /* GPIO1-7 outputs */
pci_bus_write_config(bus, dev, 0x62c, val, PCI_SIZE_32);
pci_bus_read_config(bus, dev, 0x644, &val, PCI_SIZE_32);
val |= 0xfe; /* GPIO1-7 output high */
pci_bus_write_config(bus, dev, 0x644, val, PCI_SIZE_32);
mdelay(100);
}
}
#ifdef CONFIG_SERIAL_TAG
/*
* called when setting up ATAGS before booting kernel
* populate serialnum from the following (in order of priority):
* serial# env var
* eeprom
*/
void get_board_serial(struct tag_serialnr *serialnr)
{
char *serial = env_get("serial#");
if (serial) {
serialnr->high = 0;
serialnr->low = dectoul(serial, NULL);
} else if (ventana_info.model[0]) {
serialnr->high = 0;
serialnr->low = ventana_info.serial;
} else {
serialnr->high = 0;
serialnr->low = 0;
}
}
#endif
/*
* Board Support
*/
int board_early_init_f(void)
{
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
return 0;
}
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
return 0;
}
int board_init(void)
{
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
clrsetbits_le32(&iomuxc_regs->gpr[1],
IOMUXC_GPR1_OTG_ID_MASK,
IOMUXC_GPR1_OTG_ID_GPIO1);
/* address of linux boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
/* read Gateworks EEPROM into global struct (used later) */
board_type = read_eeprom(&ventana_info);
setup_iomux_gpio(board_type);
/* show GSC details */
run_command("gsc", 0);
return 0;
}
int board_fit_config_name_match(const char *name)
{
static char init;
const char *dtb;
char buf[32];
int i = 0;
do {
dtb = gsc_get_dtb_name(i++, buf, sizeof(buf));
if (dtb && !strcmp(dtb, name)) {
if (!init++)
printf("DTB: %s\n", name);
return 0;
}
} while (dtb);
return -1;
}
#if defined(CONFIG_DISPLAY_BOARDINFO_LATE)
/*
* called during late init (after relocation and after board_init())
* by virtue of CONFIG_DISPLAY_BOARDINFO_LATE as we needed i2c initialized and
* EEPROM read.
*/
int checkboard(void)
{
struct ventana_board_info *info = &ventana_info;
const char *p;
int quiet; /* Quiet or minimal output mode */
quiet = 0;
p = env_get("quiet");
if (p)
quiet = simple_strtol(p, NULL, 10);
else
env_set("quiet", "0");
puts("\nGateworks Corporation Copyright 2014\n");
if (info->model[0]) {
printf("Model: %s\n", info->model);
printf("MFGDate: %02x-%02x-%02x%02x\n",
info->mfgdate[0], info->mfgdate[1],
info->mfgdate[2], info->mfgdate[3]);
printf("Serial:%d\n", info->serial);
} else {
puts("Invalid EEPROM - board will not function fully\n");
}
if (quiet)
return 0;
return 0;
}
#endif
#ifdef CONFIG_CMD_BMODE
/*
* BOOT_CFG1, BOOT_CFG2, BOOT_CFG3, BOOT_CFG4
* see Table 8-11 and Table 5-9
* BOOT_CFG1[7] = 1 (boot from NAND)
* BOOT_CFG1[5] = 0 - raw NAND
* BOOT_CFG1[4] = 0 - default pad settings
* BOOT_CFG1[3:2] = 00 - devices = 1
* BOOT_CFG1[1:0] = 00 - Row Address Cycles = 3
* BOOT_CFG2[4:3] = 00 - Boot Search Count = 2
* BOOT_CFG2[2:1] = 01 - Pages In Block = 64
* BOOT_CFG2[0] = 0 - Reset time 12ms
*/
static const struct boot_mode board_boot_modes[] = {
/* NAND: 64pages per block, 3 row addr cycles, 2 copies of FCB/DBBT */
{ "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) },
{ "emmc2", MAKE_CFGVAL(0x60, 0x48, 0x00, 0x00) }, /* GW5600 */
{ "emmc3", MAKE_CFGVAL(0x60, 0x50, 0x00, 0x00) }, /* GW5903/4/5 */
{ NULL, 0 },
};
#endif
/* setup GPIO pinmux and default configuration per baseboard and env */
void setup_board_gpio(int board, struct ventana_board_info *info)
{
const char *s;
char arg[10];
size_t len;
int i;
int quiet = simple_strtol(env_get("quiet"), NULL, 10);
if (board >= GW_UNKNOWN)
return;
/* RS232_EN# */
if (gpio_cfg[board].rs232_en) {
gpio_direction_output(gpio_cfg[board].rs232_en,
(hwconfig("rs232")) ? 0 : 1);
}
/* MSATA Enable */
if (gpio_cfg[board].msata_en && is_cpu_type(MXC_CPU_MX6Q)) {
gpio_direction_output(GP_MSATA_SEL,
(hwconfig("msata")) ? 1 : 0);
}
/* USBOTG Select (PCISKT or FrontPanel) */
if (gpio_cfg[board].usb_sel) {
gpio_direction_output(gpio_cfg[board].usb_sel,
(hwconfig("usb_pcisel")) ? 1 : 0);
}
/*
* Configure DIO pinmux/padctl registers
* see IMX6DQRM/IMX6SDLRM IOMUXC_SW_PAD_CTL_PAD_* register definitions
*/
for (i = 0; i < gpio_cfg[board].dio_num; i++) {
struct dio_cfg *cfg = &gpio_cfg[board].dio_cfg[i];
iomux_v3_cfg_t ctrl = DIO_PAD_CFG;
unsigned int cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1;
if (!cfg->gpio_padmux[0] && !cfg->gpio_padmux[1])
continue;
sprintf(arg, "dio%d", i);
if (!hwconfig(arg))
continue;
s = hwconfig_subarg(arg, "padctrl", &len);
if (s) {
ctrl = MUX_PAD_CTRL(hextoul(s, NULL)
& 0x1ffff) | MUX_MODE_SION;
}
if (hwconfig_subarg_cmp(arg, "mode", "gpio")) {
if (!quiet) {
printf("DIO%d: GPIO%d_IO%02d (gpio-%d)\n", i,
(cfg->gpio_param / 32) + 1,
cfg->gpio_param % 32,
cfg->gpio_param);
}
imx_iomux_v3_setup_pad(cfg->gpio_padmux[cputype] |
ctrl);
gpio_requestf(cfg->gpio_param, "dio%d", i);
gpio_direction_input(cfg->gpio_param);
} else if (hwconfig_subarg_cmp(arg, "mode", "pwm") &&
cfg->pwm_padmux) {
if (!cfg->pwm_param) {
printf("DIO%d: Error: pwm config invalid\n",
i);
continue;
}
if (!quiet)
printf("DIO%d: pwm%d\n", i, cfg->pwm_param);
imx_iomux_v3_setup_pad(cfg->pwm_padmux[cputype] |
MUX_PAD_CTRL(ctrl));
}
}
if (!quiet) {
if (gpio_cfg[board].msata_en && is_cpu_type(MXC_CPU_MX6Q)) {
printf("MSATA: %s\n", (hwconfig("msata") ?
"enabled" : "disabled"));
}
if (gpio_cfg[board].rs232_en) {
printf("RS232: %s\n", (hwconfig("rs232")) ?
"enabled" : "disabled");
}
}
}
/* late init */
int misc_init_r(void)
{
struct ventana_board_info *info = &ventana_info;
char buf[256];
int i;
/* set env vars based on EEPROM data */
if (ventana_info.model[0]) {
char str[16], fdt[36];
char *p;
const char *cputype = "";
/*
* FDT name will be prefixed with CPU type. Three versions
* will be created each increasingly generic and bootloader
* env scripts will try loading each from most specific to
* least.
*/
if (is_cpu_type(MXC_CPU_MX6Q) ||
is_cpu_type(MXC_CPU_MX6D))
cputype = "imx6q";
else if (is_cpu_type(MXC_CPU_MX6DL) ||
is_cpu_type(MXC_CPU_MX6SOLO))
cputype = "imx6dl";
env_set("soctype", cputype);
if (8 << (ventana_info.nand_flash_size-1) >= 2048)
env_set("flash_layout", "large");
else
env_set("flash_layout", "normal");
memset(str, 0, sizeof(str));
for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++)
str[i] = tolower(info->model[i]);
env_set("model", str);
if (!env_get("fdt_file")) {
sprintf(fdt, "%s-%s.dtb", cputype, str);
env_set("fdt_file", fdt);
}
p = strchr(str, '-');
if (p) {
*p++ = 0;
env_set("model_base", str);
sprintf(fdt, "%s-%s.dtb", cputype, str);
env_set("fdt_file1", fdt);
if (board_type != GW551x &&
board_type != GW552x &&
board_type != GW553x &&
board_type != GW560x)
str[4] = 'x';
str[5] = 'x';
str[6] = 0;
sprintf(fdt, "%s-%s.dtb", cputype, str);
env_set("fdt_file2", fdt);
}
/* initialize env from EEPROM */
if (test_bit(EECONFIG_ETH0, info->config) &&
!env_get("ethaddr")) {
eth_env_set_enetaddr("ethaddr", info->mac0);
}
if (test_bit(EECONFIG_ETH1, info->config) &&
!env_get("eth1addr")) {
eth_env_set_enetaddr("eth1addr", info->mac1);
}
/* board serial-number */
sprintf(str, "%6d", info->serial);
env_set("serial#", str);
/* memory MB */
sprintf(str, "%d", (int) (gd->ram_size >> 20));
env_set("mem_mb", str);
}
/* Set a non-initialized hwconfig based on board configuration */
if (!strcmp(env_get("hwconfig"), "_UNKNOWN_")) {
buf[0] = 0;
if (gpio_cfg[board_type].rs232_en)
strcat(buf, "rs232;");
for (i = 0; i < gpio_cfg[board_type].dio_num; i++) {
char buf1[32];
sprintf(buf1, "dio%d:mode=gpio;", i);
if (strlen(buf) + strlen(buf1) < sizeof(buf))
strcat(buf, buf1);
}
env_set("hwconfig", buf);
}
/* setup baseboard specific GPIO based on board and env */
setup_board_gpio(board_type, info);
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
/* disable boot watchdog */
gsc_boot_wd_disable();
return 0;
}
#ifdef CONFIG_OF_BOARD_SETUP
static int ft_sethdmiinfmt(void *blob, char *mode)
{
int off;
if (!mode)
return -EINVAL;
off = fdt_node_offset_by_compatible(blob, -1, "nxp,tda1997x");
if (off < 0)
return off;
if (0 == strcasecmp(mode, "yuv422bt656")) {
u8 cfg[] = { 0x00, 0x00, 0x00, 0x82, 0x81, 0x00,
0x00, 0x00, 0x00 };
mode = "422_ccir";
fdt_setprop(blob, off, "vidout_fmt", mode, strlen(mode) + 1);
fdt_setprop_u32(blob, off, "vidout_trc", 1);
fdt_setprop_u32(blob, off, "vidout_blc", 1);
fdt_setprop(blob, off, "vidout_portcfg", cfg, sizeof(cfg));
printf(" set HDMI input mode to %s\n", mode);
} else if (0 == strcasecmp(mode, "yuv422smp")) {
u8 cfg[] = { 0x00, 0x00, 0x00, 0x88, 0x87, 0x00,
0x82, 0x81, 0x00 };
mode = "422_smp";
fdt_setprop(blob, off, "vidout_fmt", mode, strlen(mode) + 1);
fdt_setprop_u32(blob, off, "vidout_trc", 0);
fdt_setprop_u32(blob, off, "vidout_blc", 0);
fdt_setprop(blob, off, "vidout_portcfg", cfg, sizeof(cfg));
printf(" set HDMI input mode to %s\n", mode);
} else {
return -EINVAL;
}
return 0;
}
#if defined(CONFIG_CMD_PCI)
#define PCI_ID(x) ( \
(PCI_BUS(x->devfn)<<16)| \
(PCI_DEV(x->devfn)<<11)| \
(PCI_FUNC(x->devfn)<<8) \
)
int fdt_add_pci_node(void *blob, int par, struct pci_dev *dev)
{
uint32_t reg[5];
char node[32];
int np;
sprintf(node, "pcie@%d,%d,%d", PCI_BUS(dev->devfn),
PCI_DEV(dev->devfn), PCI_FUNC(dev->devfn));
np = fdt_subnode_offset(blob, par, node);
if (np >= 0)
return np;
np = fdt_add_subnode(blob, par, node);
if (np < 0) {
printf(" %s failed: no space\n", __func__);
return np;
}
memset(reg, 0, sizeof(reg));
reg[0] = cpu_to_fdt32(PCI_ID(dev));
fdt_setprop(blob, np, "reg", reg, sizeof(reg));
return np;
}
/* build a path of nested PCI devs for all bridges passed through */
int fdt_add_pci_path(void *blob, struct pci_dev *dev)
{
struct pci_dev *bridges[MAX_PCI_DEVS];
int k, np;
/* build list of parents */
np = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-pcie");
if (np < 0)
return np;
k = 0;
while (dev) {
bridges[k++] = dev;
dev = dev->ppar;
};
/* now add them the to DT in reverse order */
while (k--) {
np = fdt_add_pci_node(blob, np, bridges[k]);
if (np < 0)
break;
}
return np;
}
/*
* The GW16082 has a hardware errata errata such that it's
* INTA/B/C/D are mis-mapped to its four slots (slot12-15). Because
* of this normal PCI interrupt swizzling will not work so we will
* provide an irq-map via device-tree.
*/
int fdt_fixup_gw16082(void *blob, int np, struct pci_dev *dev)
{
int len;
int host;
uint32_t imap_new[8*4*4];
const uint32_t *imap;
uint32_t irq[4];
uint32_t reg[4];
int i;
/* build irq-map based on host controllers map */
host = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-pcie");
if (host < 0) {
printf(" %s failed: missing host\n", __func__);
return host;
}
/* use interrupt data from root complex's node */
imap = fdt_getprop(blob, host, "interrupt-map", &len);
if (!imap || len != 128) {
printf(" %s failed: invalid interrupt-map\n",
__func__);
return -FDT_ERR_NOTFOUND;
}
/* obtain irq's of host controller in pin order */
for (i = 0; i < 4; i++)
irq[(fdt32_to_cpu(imap[(i*8)+3])-1)%4] = imap[(i*8)+6];
/*
* determine number of swizzles necessary:
* For each bridge we pass through we need to swizzle
* the number of the slot we are on.
*/
struct pci_dev *d;
int b;
b = 0;
d = dev->ppar;
while(d && d->ppar) {
b += PCI_DEV(d->devfn);
d = d->ppar;
}
/* create new irq mappings for slots12-15
* <skt> <idsel> <slot> <skt-inta> <skt-intb>
* J3 AD28 12 INTD INTA
* J4 AD29 13 INTC INTD
* J5 AD30 14 INTB INTC
* J2 AD31 15 INTA INTB
*/
for (i = 0; i < 4; i++) {
/* addr matches bus:dev:func */
u32 addr = dev->busno << 16 | (12+i) << 11;
/* default cells from root complex */
memcpy(&imap_new[i*32], imap, 128);
/* first cell is PCI device address (BDF) */
imap_new[(i*32)+(0*8)+0] = cpu_to_fdt32(addr);
imap_new[(i*32)+(1*8)+0] = cpu_to_fdt32(addr);
imap_new[(i*32)+(2*8)+0] = cpu_to_fdt32(addr);
imap_new[(i*32)+(3*8)+0] = cpu_to_fdt32(addr);
/* third cell is pin */
imap_new[(i*32)+(0*8)+3] = cpu_to_fdt32(1);
imap_new[(i*32)+(1*8)+3] = cpu_to_fdt32(2);
imap_new[(i*32)+(2*8)+3] = cpu_to_fdt32(3);
imap_new[(i*32)+(3*8)+3] = cpu_to_fdt32(4);
/* sixth cell is relative interrupt */
imap_new[(i*32)+(0*8)+6] = irq[(15-(12+i)+b+0)%4];
imap_new[(i*32)+(1*8)+6] = irq[(15-(12+i)+b+1)%4];
imap_new[(i*32)+(2*8)+6] = irq[(15-(12+i)+b+2)%4];
imap_new[(i*32)+(3*8)+6] = irq[(15-(12+i)+b+3)%4];
}
fdt_setprop(blob, np, "interrupt-map", imap_new,
sizeof(imap_new));
reg[0] = cpu_to_fdt32(0xfff00);
reg[1] = 0;
reg[2] = 0;
reg[3] = cpu_to_fdt32(0x7);
fdt_setprop(blob, np, "interrupt-map-mask", reg, sizeof(reg));
fdt_setprop_cell(blob, np, "#interrupt-cells", 1);
fdt_setprop_string(blob, np, "device_type", "pci");
fdt_setprop_cell(blob, np, "#address-cells", 3);
fdt_setprop_cell(blob, np, "#size-cells", 2);
printf(" Added custom interrupt-map for GW16082\n");
return 0;
}
/* The sky2 GigE MAC obtains it's MAC addr from device-tree by default */
int fdt_fixup_sky2(void *blob, int np, struct pci_dev *dev)
{
char *tmp, *end;
char mac[16];
unsigned char mac_addr[6];
int j;
sprintf(mac, "eth1addr");
tmp = env_get(mac);
if (tmp) {
for (j = 0; j < 6; j++) {
mac_addr[j] = tmp ?
hextoul(tmp, &end) : 0;
if (tmp)
tmp = (*end) ? end+1 : end;
}
fdt_setprop(blob, np, "local-mac-address", mac_addr,
sizeof(mac_addr));
printf(" Added mac addr for eth1\n");
return 0;
}
return -1;
}
/*
* PCI DT nodes must be nested therefore if we need to apply a DT fixup
* we will walk the PCI bus and add bridge nodes up to the device receiving
* the fixup.
*/
void ft_board_pci_fixup(void *blob, struct bd_info *bd)
{
int i, np;
struct pci_dev *dev;
for (i = 0; i < pci_devno; i++) {
dev = &pci_devs[i];
/*
* The GW16082 consists of a TI XIO2001 PCIe-to-PCI bridge and
* an EEPROM at i2c1-0x50.
*/
if ((dev->vendor == PCI_VENDOR_ID_TI) &&
(dev->device == 0x8240) &&
i2c_get_dev(1, 0x50))
{
np = fdt_add_pci_path(blob, dev);
if (np > 0)
fdt_fixup_gw16082(blob, np, dev);
}
/* ethernet1 mac address */
else if ((dev->vendor == PCI_VENDOR_ID_MARVELL) &&
(dev->device == 0x4380))
{
np = fdt_add_pci_path(blob, dev);
if (np > 0)
fdt_fixup_sky2(blob, np, dev);
}
}
}
#endif /* if defined(CONFIG_CMD_PCI) */
#define WDOG1_ADDR 0x20bc000
#define WDOG2_ADDR 0x20c0000
#define GPIO3_ADDR 0x20a4000
#define USDHC3_ADDR 0x2198000
static void ft_board_wdog_fixup(void *blob, phys_addr_t addr)
{
int off = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", addr);
if (off) {
fdt_delprop(blob, off, "ext-reset-output");
fdt_delprop(blob, off, "fsl,ext-reset-output");
}
}
void ft_early_fixup(void *blob, int board_type)
{
struct ventana_board_info *info = &ventana_info;
char rev = 0;
int i;
/* determine board revision */
for (i = sizeof(ventana_info.model) - 1; i > 0; i--) {
if (ventana_info.model[i] >= 'A') {
rev = ventana_info.model[i];
break;
}
}
/*
* Board model specific fixups
*/
switch (board_type) {
case GW51xx:
/*
* disable wdog node for GW51xx-A/B to work around
* errata causing wdog timer to be unreliable.
*/
if (rev >= 'A' && rev < 'C') {
i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt",
WDOG1_ADDR);
if (i)
fdt_status_disabled(blob, i);
}
/* GW51xx-E adds WDOG1_B external reset */
if (rev < 'E')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW52xx:
/* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */
if (info->model[4] == '2') {
u32 handle = 0;
u32 *range = NULL;
i = fdt_node_offset_by_compatible(blob, -1,
"fsl,imx6q-pcie");
if (i)
range = (u32 *)fdt_getprop(blob, i,
"reset-gpio", NULL);
if (range) {
i = fdt_node_offset_by_compat_reg(blob,
"fsl,imx6q-gpio", GPIO3_ADDR);
if (i)
handle = fdt_get_phandle(blob, i);
if (handle) {
range[0] = cpu_to_fdt32(handle);
range[1] = cpu_to_fdt32(23);
}
}
/* these have broken usd_vsel */
if (strstr((const char *)info->model, "SP318-B") ||
strstr((const char *)info->model, "SP331-B"))
gpio_cfg[board_type].usd_vsel = 0;
/* GW522x-B adds WDOG1_B external reset */
if (rev < 'B')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
}
/* GW520x-E adds WDOG1_B external reset */
else if (info->model[4] == '0' && rev < 'E')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW53xx:
/* GW53xx-E adds WDOG1_B external reset */
if (rev < 'E')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
/* GW53xx-G has an adv7280 instead of an adv7180 */
else if (rev > 'F') {
i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180");
if (i) {
fdt_setprop_string(blob, i, "compatible", "adi,adv7280");
fdt_setprop_empty(blob, i, "adv,force-bt656-4");
}
}
break;
case GW54xx:
/*
* disable serial2 node for GW54xx for compatibility with older
* 3.10.x kernel that improperly had this node enabled in the DT
*/
fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED);
/* GW54xx-E adds WDOG2_B external reset */
if (rev < 'E')
ft_board_wdog_fixup(blob, WDOG2_ADDR);
/* GW54xx-G has an adv7280 instead of an adv7180 */
else if (rev > 'F') {
i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180");
if (i) {
fdt_setprop_string(blob, i, "compatible", "adi,adv7280");
fdt_setprop_empty(blob, i, "adv,force-bt656-4");
}
}
break;
case GW551x:
/* GW551x-C adds WDOG1_B external reset */
if (rev < 'C')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW5901:
case GW5902:
/* GW5901/GW5901 revB adds WDOG1_B as an external reset */
if (rev < 'B')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
}
/* remove no-1-8-v if UHS-I support is present */
if (gpio_cfg[board_type].usd_vsel) {
debug("Enabling UHS-I support\n");
i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-usdhc",
USDHC3_ADDR);
if (i)
fdt_delprop(blob, i, "no-1-8-v");
}
}
/*
* called prior to booting kernel or by 'fdt boardsetup' command
*
* unless 'fdt_noauto' env var is set we will update the following in the DTB:
* - mtd partitions based on mtdparts/mtdids env
* - system-serial (board serial num from EEPROM)
* - board (full model from EEPROM)
* - peripherals removed from DTB if not loaded on board (per EEPROM config)
*/
#define PWM0_ADDR 0x2080000
int ft_board_setup(void *blob, struct bd_info *bd)
{
struct ventana_board_info *info = &ventana_info;
struct ventana_eeprom_config *cfg;
static const struct node_info nand_nodes[] = {
{ "sst,w25q256", MTD_DEV_TYPE_NOR, }, /* SPI flash */
{ "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
};
const char *model = env_get("model");
const char *display = env_get("display");
int i;
char rev = 0;
/* determine board revision */
for (i = sizeof(ventana_info.model) - 1; i > 0; i--) {
if (ventana_info.model[i] >= 'A') {
rev = ventana_info.model[i];
break;
}
}
if (env_get("fdt_noauto")) {
puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
return 0;
}
/* Update MTD partition nodes using info from mtdparts env var */
puts(" Updating MTD partitions...\n");
fdt_fixup_mtdparts(blob, nand_nodes, ARRAY_SIZE(nand_nodes));
/* Update display timings from display env var */
if (display) {
if (fdt_fixup_display(blob, fdt_get_alias(blob, "lvds0"),
display) >= 0)
printf(" Set display timings for %s...\n", display);
}
printf(" Adjusting FDT per EEPROM for %s...\n", model);
/* board serial number */
fdt_setprop(blob, 0, "system-serial", env_get("serial#"),
strlen(env_get("serial#")) + 1);
/* board (model contains model from device-tree) */
fdt_setprop(blob, 0, "board", info->model,
strlen((const char *)info->model) + 1);
/* set desired digital video capture format */
ft_sethdmiinfmt(blob, env_get("hdmiinfmt"));
/* early board/revision ft fixups */
ft_early_fixup(blob, board_type);
/* Configure DIO */
for (i = 0; i < gpio_cfg[board_type].dio_num; i++) {
struct dio_cfg *cfg = &gpio_cfg[board_type].dio_cfg[i];
char arg[10];
sprintf(arg, "dio%d", i);
if (!hwconfig(arg))
continue;
if (hwconfig_subarg_cmp(arg, "mode", "pwm") && cfg->pwm_param)
{
phys_addr_t addr;
int off;
printf(" Enabling pwm%d for DIO%d\n",
cfg->pwm_param, i);
addr = PWM0_ADDR + (0x4000 * (cfg->pwm_param - 1));
off = fdt_node_offset_by_compat_reg(blob,
"fsl,imx6q-pwm",
addr);
if (off)
fdt_status_okay(blob, off);
}
}
#if defined(CONFIG_CMD_PCI)
if (!env_get("nopcifixup"))
ft_board_pci_fixup(blob, bd);
#endif
/*
* remove reset gpio control as we configure the PHY registers
* for internal delay, LED config, and clock config in the bootloader
*/
i = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-fec");
if (i)
fdt_delprop(blob, i, "phy-reset-gpios");
/*
* Peripheral Config:
* remove nodes by alias path if EEPROM config tells us the
* peripheral is not loaded on the board.
*/
if (env_get("fdt_noconfig")) {
puts(" Skiping periperhal config (fdt_noconfig defined)\n");
return 0;
}
cfg = econfig;
while (cfg->name) {
if (!test_bit(cfg->bit, info->config)) {
fdt_del_node_and_alias(blob, cfg->dtalias ?
cfg->dtalias : cfg->name);
}
cfg++;
}
return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
Reference in a new issue View git blame Copy permalink