Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-07 21:54:45 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-imx/Makefile
Shyam Saini 1d43e24b94 i.MX6: nand: add nandbcb command for imx 
Writing/updating boot image in nand device is not
straight forward in i.MX6 platform and it requires
boot control block(BCB) to be configured.

It becomes difficult to use uboot 'nand' command to
write BCB since it requires platform specific attributes
need to be taken care of.

It is even difficult to use existing msx-nand.c driver by
incorporating BCB attributes like mxs_dma_desc does
because it requires change in mtd and nand command.

So, cmd_nandbcb implemented in arch/arm/mach-imx

BCB contains two data structures, Firmware Configuration Block(FCB)
and Discovered Bad Block Table(DBBT). FCB has nand timings,
DBBT search area, page address of firmware.

On summary, nandbcb update will
- erase the entire partition
- create BCB by creating 2 FCB/DBBT block followed by
  1 FW block based on partition size and erasesize.
- fill FCB/DBBT structures
- write FW/SPL on FW1
- write FCB/DBBT in first 2 blocks

for nand boot, up on reset bootrom look for FCB structure in
first block's if FCB found the nand timings are loaded for
further reads. once FCB read done, DTTB will load and finally
firmware will be loaded which is boot image.

Refer section "NAND Boot" from doc/imx/common/imx6.txt for more usage
information.

Reviewed-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-07-19 14:51:25 +02:00

210 lines
6.2 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2011 Freescale Semiconductor, Inc.
ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 mx7 imx8m vf610))
obj-y = iomux-v3.o
endif
ifeq ($(SOC),$(filter $(SOC),imx8m))
ifneq ($(CONFIG_SPL_BUILD),y)
obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
endif
obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o
obj-$(CONFIG_FEC_MXC) += mac.o
obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
obj-y += cpu.o
endif
ifeq ($(SOC),$(filter $(SOC),mx5 mx6))
obj-y += cpu.o speed.o
obj-$(CONFIG_GPT_TIMER) += timer.o
obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
endif
ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs imx8m imx8))
obj-y += misc.o
obj-$(CONFIG_SPL_BUILD) += spl.o
endif
ifeq ($(SOC),$(filter $(SOC),mx7))
obj-y += cpu.o
obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o
endif
ifeq ($(SOC),$(filter $(SOC),mx5 mx6 mx7))
obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
endif
ifeq ($(SOC),$(filter $(SOC),mx6 mx7))
obj-y += cache.o init.o
obj-$(CONFIG_FEC_MXC) += mac.o
obj-$(CONFIG_IMX_RDC) += rdc-sema.o
ifneq ($(CONFIG_SPL_BUILD),y)
obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
endif
obj-$(CONFIG_SATA) += sata.o
obj-$(CONFIG_SECURE_BOOT) += hab.o
obj-$(CONFIG_SYSCOUNTER_TIMER) += syscounter.o
endif
ifeq ($(SOC),$(filter $(SOC),mx7ulp))
obj-y += cache.o
obj-$(CONFIG_SECURE_BOOT) += hab.o
endif
ifeq ($(SOC),$(filter $(SOC),vf610))
obj-y += ddrmc-vf610.o
obj-$(CONFIG_DDRMC_VF610_CALIBRATION) += ddrmc-vf610-calibration.o
endif
ifneq ($(CONFIG_SPL_BUILD),y)
obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o
obj-$(CONFIG_CMD_NANDBCB) += cmd_nandbcb.o
endif
PLUGIN = board/$(BOARDDIR)/plugin
ifeq ($(CONFIG_USE_IMXIMG_PLUGIN),y)
$(PLUGIN).o: $(PLUGIN).S FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,as_o_S)
$(PLUGIN).bin: $(PLUGIN).o FORCE
$(Q)mkdir -p $(dir $@)
$(OBJCOPY) -O binary --gap-fill 0xff $< $@
else
$(PLUGIN).bin:
endif
quiet_cmd_cpp_cfg = CFGS $@
cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
# mkimage source config file
IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
# How to create a cpp processed config file, they all use the same source
%.cfgout: $(IMX_CONFIG) FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cpp_cfg)
ifeq ($(CONFIG_ARCH_IMX8), y)
CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh
IMAGE_TYPE := imx8image
ifeq ($(CONFIG_SPL_BUILD),y)
SPL_DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG); if [ -f spl/u-boot-spl.cfgout ]; then $(CNTR_DEPFILES) spl/u-boot-spl.cfgout; echo $$?; fi)
endif
DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi)
else ifeq ($(CONFIG_ARCH_IMX8M), y)
IMAGE_TYPE := imx8mimage
IMX8M_DEPFILES := $(srctree)/tools/imx8m_image.sh
DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG);if [ -f spl/u-boot-spl.cfgout ]; then $(IMX8M_DEPFILES) spl/u-boot-spl.cfgout 0; echo $$?; fi)
else
IMAGE_TYPE := imximage
DEPFILE_EXISTS := 0
endif
MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
$(call if_changed,mkimage)
ifeq ($(CONFIG_MULTI_DTB_FIT),y)
MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
u-boot-dtb.imx: u-boot-fit-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
ifeq ($(DEPFILE_EXISTS),0)
$(call if_changed,mkimage)
endif
else ifeq ($(CONFIG_OF_SEPARATE),y)
MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
ifeq ($(DEPFILE_EXISTS),0)
$(call if_changed,mkimage)
endif
endif
ifdef CONFIG_ARM64
ifeq ($(CONFIG_ARCH_IMX8M), y)
SPL:
MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout \
-T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
flash.bin: MKIMAGEOUTPUT = flash.log
spl/u-boot-spl-ddr.bin: spl/u-boot-spl.bin spl/u-boot-spl.cfgout FORCE
ifeq ($(DEPFILE_EXISTS),0)
$(IMX8M_DEPFILES) spl/u-boot-spl.cfgout 1
endif
flash.bin: spl/u-boot-spl-ddr.bin u-boot.itb FORCE
ifeq ($(DEPFILE_EXISTS),0)
$(call if_changed,mkimage)
endif
endif
ifeq ($(CONFIG_ARCH_IMX8), y)
SPL:
MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout -T $(IMAGE_TYPE) -e 0x100000
flash.bin: MKIMAGEOUTPUT = flash.log
flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
ifeq ($(SPL_DEPFILE_EXISTS),0)
$(call if_changed,mkimage)
endif
endif
else
MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
-T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
SPL: MKIMAGEOUTPUT = SPL.log
SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
$(call if_changed,mkimage)
MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
-e $(CONFIG_SYS_TEXT_BASE) -C none -T firmware
u-boot.uim: u-boot.bin FORCE
$(call if_changed,mkimage)
OBJCOPYFLAGS += -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
append = cat $(filter-out $< $(PHONY), $^) >> $@
quiet_cmd_pad_cat = CAT $@
cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
u-boot-with-spl.imx: SPL u-boot.uim FORCE
$(call if_changed,pad_cat)
u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE
$(call if_changed,pad_cat)
quiet_cmd_u-boot-nand-spl_imx = GEN $@
cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
dd bs=1015 count=1 if=/dev/zero 2>/dev/null) | cat - $< > $@
spl/u-boot-nand-spl.imx: SPL FORCE
$(call if_changed,u-boot-nand-spl_imx)
endif
targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
obj-$(CONFIG_ARM64) += lowlevel.o sip.o
obj-$(CONFIG_MX5) += mx5/
obj-$(CONFIG_MX6) += mx6/
obj-$(CONFIG_MX7) += mx7/
obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/
obj-$(CONFIG_IMX8M) += imx8m/
obj-$(CONFIG_ARCH_IMX8) += imx8/
Reference in a new issue View git blame Copy permalink