mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
fd211f85cc
Drop the pinmux setup in the board in favor of setting it up in the device tree. Device tree nodes match nodes used for the Linux device tree and are set according to the service manual. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
66 lines
2.1 KiB
C
66 lines
2.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* (C) Copyright 2010,2012
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* (C) Copyright 2022
|
|
* Svyatoslav Ryhel <clamor95@gmail.com>
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <linux/sizes.h>
|
|
|
|
#include "tegra30-common.h"
|
|
|
|
/* High-level configuration options */
|
|
#define CFG_TEGRA_BOARD_STRING "LG X3 Board"
|
|
|
|
#define X3_FLASH_UBOOT \
|
|
"flash_uboot=echo Preparing RAM;" \
|
|
"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
|
|
"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
|
|
"echo Reading BCT;" \
|
|
"mmc dev 0 1;" \
|
|
"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
|
|
"echo Reading bootloader;" \
|
|
"if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
|
|
"then echo Calculating bootloader size;" \
|
|
"size mmc 0:1 ${bootloader_file};" \
|
|
"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
|
|
"echo Writing bootloader to eMMC;" \
|
|
"mmc dev 0 1;" \
|
|
"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
|
|
"mmc dev 0 2;" \
|
|
"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
|
|
"echo Bootloader written successfully;" \
|
|
"pause 'Press ANY key to reboot device...'; reset;" \
|
|
"else echo Reading bootloader failed;" \
|
|
"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
|
|
|
|
#define X3_BOOTMENU \
|
|
X3_FLASH_UBOOT \
|
|
"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
|
|
"bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
|
|
"bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
|
|
"bootmenu_3=update bootloader=run flash_uboot\0" \
|
|
"bootmenu_4=reboot RCM=enterrcm\0" \
|
|
"bootmenu_5=reboot=reset\0" \
|
|
"bootmenu_6=power off=poweroff\0" \
|
|
"bootmenu_delay=-1\0"
|
|
|
|
#define BOARD_EXTRA_ENV_SETTINGS \
|
|
"boot_block_size_r=0x200000\0" \
|
|
"boot_block_size=0x1000\0" \
|
|
"bootloader_file=u-boot-dtb-tegra.bin\0" \
|
|
"check_button=gpio input 116; test $? -eq 0\0" \
|
|
"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
|
X3_BOOTMENU
|
|
|
|
/* Board-specific serial config */
|
|
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
|
|
|
|
#include "tegra-common-post.h"
|
|
|
|
#endif /* __CONFIG_H */
|