mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
636c316f9b
Specify hwconfig usage for USB mode and phy change Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
46 lines
1.4 KiB
Text
46 lines
1.4 KiB
Text
Freescale-specific 'hwconfig' options.
|
|
|
|
This file documents Freescale-specific key:value pairs for the 'hwconfig'
|
|
option. See README.hwconfig for general information about 'hwconfig'.
|
|
|
|
audclk
|
|
Specific to the P1022DS reference board.
|
|
|
|
This option specifies which of the two oscillator frequencies should be
|
|
routed to the Wolfson WM8776 codec. The ngPIXIS can be programmed to
|
|
route either a 11.2896MHz or a 12.288MHz clock. The default is
|
|
12.288MHz. This option has two effects. First, the MUX on the board
|
|
will be programmed accordingly. Second, the clock-frequency property
|
|
in the codec node in the device tree will be updated to the correct
|
|
value.
|
|
|
|
'audclk:11'
|
|
Select the 11.2896MHz clock
|
|
|
|
'audclk:12'
|
|
Select the 12.288MHz clock
|
|
|
|
usb
|
|
Specific to boards have USB controller
|
|
|
|
This option specifies the following for a USB controller:
|
|
|
|
- which controller mode to use
|
|
- which USB PHY to use
|
|
|
|
This is used by generic USB device-tree fixup function to update
|
|
modified values of phy type and controller mode.
|
|
|
|
Also used for configuring multiple USB controllers such that
|
|
'usbN' (where N is 1, 2, etc. refers to controller no.)
|
|
|
|
'phy_type'
|
|
Select USB phy type: 'utmi' OR 'ulpi'
|
|
|
|
'dr_mode'
|
|
Select USB controller mode: 'host', 'peripheral' OR 'otg'
|
|
|
|
Examples:
|
|
usb1:dr_mode=host;usb2:dr_mode=peripheral'
|
|
|
|
usb1:dr_mode=host,phy_type=utmi;usb2:dr_mode=host'
|