u-boot/configs/gardena-smart-gateway-mt7688_defconfig
Tom Rini cbabe7f87f configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS
Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
that had been enabling it turn it on by hand.  This exposed that we had
not yet migrated CMD_MTDPARTS fully, so do so now.

Fixes: 86dfa556d9 ("cmd: ubi: Remove useless call to mtdparts_init()")
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 10:53:27 -05:00

59 lines
1.5 KiB
Text

CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x9c000000
CONFIG_ARCH_MT7620=y
CONFIG_BOOT_ROM=y
CONFIG_ONBOARD_DDR2_SIZE_1024MBIT=y
CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
# CONFIG_CMD_NET is not set
CONFIG_CMD_TIME=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="spi-nand0=spi-nand0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-nand0:-(ubi)"
CONFIG_CMD_UBI=y
CONFIG_OF_EMBED=y
CONFIG_DEFAULT_DEVICE_TREE="gardena-smart-gateway-mt7688"
CONFIG_ENV_IS_IN_SPI_FLASH=y
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_HAVE_BLOCK_DEVICE=y
CONFIG_CLK=y
CONFIG_CPU=y
CONFIG_DM_GPIO=y
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
CONFIG_MTD=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY=y
CONFIG_POWER_DOMAIN=y
CONFIG_RAM=y
CONFIG_DM_RESET=y
CONFIG_BAUDRATE=57600
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SYSRESET_SYSCON=y