u-boot/arch/powerpc/cpu/mpc86xx/cpu_init.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

102 lines
1.9 KiB
C

/*
* Copyright 2004,2009-2011 Freescale Semiconductor, Inc.
* Jeff Brown
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* cpu_init.c - low level cpu init
*/
#include <config.h>
#include <common.h>
#include <mpc86xx.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/mp.h>
extern void srio_init(void);
DECLARE_GLOBAL_DATA_PTR;
/*
* Breathe some life into the CPU...
*
* Set up the memory map
* initialize a bunch of registers
*/
void cpu_init_f(void)
{
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
#ifdef CONFIG_FSL_LAW
init_laws();
#endif
setup_bats();
init_early_memctl_regs();
#if defined(CONFIG_FSL_DMA)
dma_init();
#endif
/* enable the timebase bit in HID0 */
set_hid0(get_hid0() | 0x4000000);
/* enable EMCP, SYNCBE | ABE bits in HID1 */
set_hid1(get_hid1() | 0x80000C00);
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
/* needs to be in ram since code uses global static vars */
fsl_serdes_init();
#ifdef CONFIG_SYS_SRIO
srio_init();
#endif
#if defined(CONFIG_MP)
setup_mp();
#endif
return 0;
}
#ifdef CONFIG_ADDR_MAP
/* Initialize address mapping array */
void init_addr_map(void)
{
int i;
ppc_bat_t bat = DBAT0;
phys_size_t size;
unsigned long upper, lower;
for (i = 0; i < CONFIG_SYS_NUM_ADDR_MAP; i++, bat++) {
if (read_bat(bat, &upper, &lower) != -1) {
if (!BATU_VALID(upper))
size = 0;
else
size = BATU_SIZE(upper);
addrmap_set_entry(BATU_VADDR(upper), BATL_PADDR(lower),
size, i);
}
#ifdef CONFIG_HIGH_BATS
/* High bats are not contiguous with low BAT numbers */
if (bat == DBAT3)
bat = DBAT4 - 1;
#endif
}
}
#endif