mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 16:23:14 +00:00
82ceba2ca2
This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM, installed on the congatec Qseven 2.0 evaluation carrier board (conga-QEVAL). Its port is very similar to the MinnowboardMAX port and also uses the Intel FSP as described in doc/README.x86. Currently supported are the following interfaces / devices: - UART (via Winbond legacy SuperIO chip on carrier board) - Ethernet (PCIe Intel I210 / E1000) - SPI including SPI NOR as boot-device - USB 2.0 - SATA via U-Boot SCSI IF - eMMC - Video (HDMI output @ 800x600) - PCIe Not supported yet is: - I2C - USB 3.0 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
278 lines
6.1 KiB
Text
278 lines
6.1 KiB
Text
/*
|
|
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
|
|
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/x86-gpio.h>
|
|
#include <dt-bindings/interrupt-router/intel-irq.h>
|
|
|
|
/include/ "skeleton.dtsi"
|
|
/include/ "serial.dtsi"
|
|
/include/ "rtc.dtsi"
|
|
/include/ "tsc_timer.dtsi"
|
|
|
|
/ {
|
|
model = "congatec-QEVAL20-QA3-E3845";
|
|
compatible = "congatec,qeval20-qa3-e3845", "intel,baytrail";
|
|
|
|
aliases {
|
|
serial0 = &serial;
|
|
spi0 = &spi;
|
|
};
|
|
|
|
config {
|
|
silent_console = <0>;
|
|
};
|
|
|
|
pch_pinctrl {
|
|
compatible = "intel,x86-pinctrl";
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "/serial";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "intel,baytrail-cpu";
|
|
reg = <0>;
|
|
intel,apic-id = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "intel,baytrail-cpu";
|
|
reg = <1>;
|
|
intel,apic-id = <2>;
|
|
};
|
|
|
|
cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "intel,baytrail-cpu";
|
|
reg = <2>;
|
|
intel,apic-id = <4>;
|
|
};
|
|
|
|
cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "intel,baytrail-cpu";
|
|
reg = <3>;
|
|
intel,apic-id = <6>;
|
|
};
|
|
};
|
|
|
|
pci {
|
|
compatible = "intel,pci-baytrail", "pci-x86";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
u-boot,dm-pre-reloc;
|
|
ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
|
|
0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
|
|
0x01000000 0x0 0x2000 0x2000 0 0xe000>;
|
|
|
|
pch@1f,0 {
|
|
reg = <0x0000f800 0 0 0 0>;
|
|
compatible = "pci8086,0f1c", "intel,pch9";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
irq-router {
|
|
compatible = "intel,irq-router";
|
|
intel,pirq-config = "ibase";
|
|
intel,ibase-offset = <0x50>;
|
|
intel,pirq-link = <8 8>;
|
|
intel,pirq-mask = <0xdee0>;
|
|
intel,pirq-routing = <
|
|
/* BayTrail PCI devices */
|
|
PCI_BDF(0, 2, 0) INTA PIRQA
|
|
PCI_BDF(0, 3, 0) INTA PIRQA
|
|
PCI_BDF(0, 16, 0) INTA PIRQA
|
|
PCI_BDF(0, 17, 0) INTA PIRQA
|
|
PCI_BDF(0, 18, 0) INTA PIRQA
|
|
PCI_BDF(0, 19, 0) INTA PIRQA
|
|
PCI_BDF(0, 20, 0) INTA PIRQA
|
|
PCI_BDF(0, 21, 0) INTA PIRQA
|
|
PCI_BDF(0, 22, 0) INTA PIRQA
|
|
PCI_BDF(0, 23, 0) INTA PIRQA
|
|
PCI_BDF(0, 24, 0) INTA PIRQA
|
|
PCI_BDF(0, 24, 1) INTC PIRQC
|
|
PCI_BDF(0, 24, 2) INTD PIRQD
|
|
PCI_BDF(0, 24, 3) INTB PIRQB
|
|
PCI_BDF(0, 24, 4) INTA PIRQA
|
|
PCI_BDF(0, 24, 5) INTC PIRQC
|
|
PCI_BDF(0, 24, 6) INTD PIRQD
|
|
PCI_BDF(0, 24, 7) INTB PIRQB
|
|
PCI_BDF(0, 26, 0) INTA PIRQA
|
|
PCI_BDF(0, 27, 0) INTA PIRQA
|
|
PCI_BDF(0, 28, 0) INTA PIRQA
|
|
PCI_BDF(0, 28, 1) INTB PIRQB
|
|
PCI_BDF(0, 28, 2) INTC PIRQC
|
|
PCI_BDF(0, 28, 3) INTD PIRQD
|
|
PCI_BDF(0, 29, 0) INTA PIRQA
|
|
PCI_BDF(0, 30, 0) INTA PIRQA
|
|
PCI_BDF(0, 30, 1) INTD PIRQD
|
|
PCI_BDF(0, 30, 2) INTB PIRQB
|
|
PCI_BDF(0, 30, 3) INTC PIRQC
|
|
PCI_BDF(0, 30, 4) INTD PIRQD
|
|
PCI_BDF(0, 30, 5) INTB PIRQB
|
|
PCI_BDF(0, 31, 3) INTB PIRQB
|
|
|
|
/*
|
|
* PCIe root ports downstream
|
|
* interrupts
|
|
*/
|
|
PCI_BDF(1, 0, 0) INTA PIRQA
|
|
PCI_BDF(1, 0, 0) INTB PIRQB
|
|
PCI_BDF(1, 0, 0) INTC PIRQC
|
|
PCI_BDF(1, 0, 0) INTD PIRQD
|
|
PCI_BDF(2, 0, 0) INTA PIRQB
|
|
PCI_BDF(2, 0, 0) INTB PIRQC
|
|
PCI_BDF(2, 0, 0) INTC PIRQD
|
|
PCI_BDF(2, 0, 0) INTD PIRQA
|
|
PCI_BDF(3, 0, 0) INTA PIRQC
|
|
PCI_BDF(3, 0, 0) INTB PIRQD
|
|
PCI_BDF(3, 0, 0) INTC PIRQA
|
|
PCI_BDF(3, 0, 0) INTD PIRQB
|
|
PCI_BDF(4, 0, 0) INTA PIRQD
|
|
PCI_BDF(4, 0, 0) INTB PIRQA
|
|
PCI_BDF(4, 0, 0) INTC PIRQB
|
|
PCI_BDF(4, 0, 0) INTD PIRQC
|
|
>;
|
|
};
|
|
|
|
spi: spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "intel,ich9-spi";
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
compatible = "stmicro,n25q064a",
|
|
"spi-flash";
|
|
memory-map = <0xff800000 0x00800000>;
|
|
rw-mrc-cache {
|
|
label = "rw-mrc-cache";
|
|
reg = <0x006f0000 0x00010000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpioa {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0 0x20>;
|
|
bank-name = "A";
|
|
};
|
|
|
|
gpiob {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0x20 0x20>;
|
|
bank-name = "B";
|
|
};
|
|
|
|
gpioc {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0x40 0x20>;
|
|
bank-name = "C";
|
|
};
|
|
|
|
gpiod {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0x60 0x20>;
|
|
bank-name = "D";
|
|
};
|
|
|
|
gpioe {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0x80 0x20>;
|
|
bank-name = "E";
|
|
};
|
|
|
|
gpiof {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0xA0 0x20>;
|
|
bank-name = "F";
|
|
};
|
|
};
|
|
};
|
|
|
|
fsp {
|
|
compatible = "intel,baytrail-fsp";
|
|
fsp,mrc-init-tseg-size = <0>;
|
|
fsp,mrc-init-mmio-size = <0x800>;
|
|
fsp,mrc-init-spd-addr1 = <0xa0>;
|
|
fsp,mrc-init-spd-addr2 = <0xa2>;
|
|
fsp,emmc-boot-mode = <2>;
|
|
fsp,enable-sdio;
|
|
fsp,enable-sdcard;
|
|
fsp,enable-hsuart1;
|
|
fsp,enable-spi;
|
|
fsp,enable-sata;
|
|
fsp,sata-mode = <1>;
|
|
fsp,enable-lpe;
|
|
fsp,lpss-sio-enable-pci-mode;
|
|
fsp,enable-dma0;
|
|
fsp,enable-dma1;
|
|
fsp,enable-i2c0;
|
|
fsp,enable-i2c1;
|
|
fsp,enable-i2c2;
|
|
fsp,enable-i2c3;
|
|
fsp,enable-i2c4;
|
|
fsp,enable-i2c5;
|
|
fsp,enable-i2c6;
|
|
fsp,enable-pwm0;
|
|
fsp,enable-pwm1;
|
|
fsp,igd-dvmt50-pre-alloc = <2>;
|
|
fsp,aperture-size = <2>;
|
|
fsp,gtt-size = <2>;
|
|
fsp,scc-enable-pci-mode;
|
|
fsp,os-selection = <4>;
|
|
fsp,emmc45-ddr50-enabled;
|
|
fsp,emmc45-retune-timer-value = <8>;
|
|
fsp,enable-igd;
|
|
fsp,enable-memory-down;
|
|
fsp,memory-down-params {
|
|
compatible = "intel,baytrail-fsp-mdp";
|
|
fsp,dram-speed = <2>; /* 2=1333MHz */
|
|
fsp,dram-type = <1>; /* 1=DDR3L */
|
|
fsp,dimm-0-enable;
|
|
fsp,dimm-1-enable;
|
|
fsp,dimm-width = <1>; /* 1=x16, 2=x32 */
|
|
fsp,dimm-density = <2>; /* 2=4Gbit */
|
|
fsp,dimm-bus-width = <3>; /* 3=64bits */
|
|
fsp,dimm-sides = <0>; /* 0=1 ranks -> 0x2b */
|
|
|
|
/* These following values might need a re-visit */
|
|
fsp,dimm-tcl = <8>;
|
|
fsp,dimm-trpt-rcd = <8>;
|
|
fsp,dimm-twr = <8>;
|
|
fsp,dimm-twtr = <4>;
|
|
fsp,dimm-trrd = <6>;
|
|
fsp,dimm-trtp = <4>;
|
|
fsp,dimm-tfaw = <22>;
|
|
};
|
|
};
|
|
|
|
microcode {
|
|
update@0 {
|
|
#include "microcode/m0130673322.dtsi"
|
|
};
|
|
update@1 {
|
|
#include "microcode/m0130679901.dtsi"
|
|
};
|
|
};
|
|
};
|