u-boot/arch/arm/cpu/arm720t/tegra20/spl.c
Allen Martin c037c93bf9 ARM: add tegra20 support to arm720t
Add support for tegra20 arm7 boot processor.  This processor is used
to power on the Cortex A9 and transfer control to it.  In tegra this
processor is an ARM7TDMI not an ARM720T, but since we don't use cache
it was easier to just reuse the ARM720T code as the processors are
otherwise identical except for cache and MMU.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-09-01 14:58:22 +02:00

133 lines
3.1 KiB
C

/*
* (C) Copyright 2012
* NVIDIA Inc, <www.nvidia.com>
*
* Allen Martin <amartin@nvidia.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/u-boot.h>
#include <asm/utils.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/clock.h>
#include <nand.h>
#include <mmc.h>
#include <fat.h>
#include <version.h>
#include <i2c.h>
#include <image.h>
#include <malloc.h>
#include <linux/compiler.h>
#include "board.h"
#include "cpu.h"
#include <asm/io.h>
#include <asm/arch/tegra20.h>
#include <asm/arch/clk_rst.h>
#include <asm/arch/clock.h>
#include <asm/arch/pmc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/scu.h>
#include <common.h>
DECLARE_GLOBAL_DATA_PTR;
/* Define global data structure pointer to it*/
static gd_t gdata __attribute__ ((section(".data")));
static bd_t bdata __attribute__ ((section(".data")));
inline void hang(void)
{
puts("### ERROR ### Please RESET the board ###\n");
for (;;)
;
}
void board_init_f(ulong dummy)
{
board_init_uart_f();
/* Initialize periph GPIOs */
#ifdef CONFIG_SPI_UART_SWITCH
gpio_early_init_uart();
#else
gpio_config_uart();
#endif
/*
* We call relocate_code() with relocation target same as the
* CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting
* skipped. Instead, only .bss initialization will happen. That's
* all we need
*/
debug(">>board_init_f()\n");
relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
}
/* This requires UART clocks to be enabled */
static void preloader_console_init(void)
{
const char *u_boot_rev = U_BOOT_VERSION;
gd = &gdata;
gd->bd = &bdata;
gd->flags |= GD_FLG_RELOC;
gd->baudrate = CONFIG_BAUDRATE;
serial_init(); /* serial communications setup */
gd->have_console = 1;
/* Avoid a second "U-Boot" coming from this string */
u_boot_rev = &u_boot_rev[7];
printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
U_BOOT_TIME);
}
void board_init_r(gd_t *id, ulong dummy)
{
struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
/* enable JTAG */
writel(0xC0, &pmt->pmt_cfg_ctl);
debug(">>spl:board_init_r()\n");
mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
CONFIG_SYS_SPL_MALLOC_SIZE);
#ifdef CONFIG_SPL_BOARD_INIT
spl_board_init();
#endif
clock_early_init();
serial_init();
preloader_console_init();
start_cpu((u32)CONFIG_SYS_TEXT_BASE);
halt_avp();
/* not reached */
}
int board_usb_init(const void *blob)
{
return 0;
}