u-boot/include/configs/rk3128_common.h
Tom Rini 86cf1c8285 configs: Migrate CONFIG_NR_DRAM_BANKS
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
  CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
  2), set this to 8.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 16:45:02 -04:00

61 lines
1.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2017 Rockchip Electronics Co., Ltd
*/
#ifndef __CONFIG_RK3128_COMMON_H
#define __CONFIG_RK3128_COMMON_H
#include "rockchip-common.h"
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
#define CONFIG_SYS_TIMER_BASE 0x200440a0 /* TIMER5 */
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
#define CONFIG_SYS_INIT_SP_ADDR 0x60100000
#define CONFIG_SYS_LOAD_ADDR 0x60800800
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
/* MMC/SD IP block */
#define CONFIG_BOUNCE_BUFFER
/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_SDRAM_BASE 0x60000000
#define SDRAM_MAX_SIZE 0x80000000
#define CONFIG_SPI_FLASH
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
#ifndef CONFIG_SPL_BUILD
/* usb mass storage */
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x60500000\0" \
"pxefile_addr_r=0x60600000\0" \
"fdt_addr_r=0x61f00000\0" \
"kernel_addr_r=0x62000000\0" \
"ramdisk_addr_r=0x64000000\0"
#include <config_distro_bootcmd.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
BOOTENV
#endif
#endif